Hi All,
I'm getting output errors in Ethernet and Port channels in switch.
I can see that Ethernet and Port Channel is up and connected.

Please let me what may be happened and where and how to investigate more on this.


LOGS:
---------------------------------------------------------------------

i-sw-5#show int po03
Port-Channel3 is up, line protocol is up (connected)
Hardware is Port-Channel, address is 001c.732b.af3f
Description: mlag to node3
MTU 9212 bytes, BW 20000000 Kbit
Full-duplex, 20Gb/s
Active members in this channel: 2
... Ethernet3 , Full-duplex, 10Gb/s
... PeerEthernet3 , Full-duplex, 10Gb/s
Fallback mode is: off
Last clearing of "show interface" counters never
5 minutes input rate 3.35 Mbps (0.0 with framing), 1356 packets/sec
5 minutes output rate 3.65 Mbps (0.0 with framing), 1377 packets/sec
188620887714 packets input, 141598576385410 bytes
Received 19 broadcasts, 1758649 multicast
0 input errors
197234239490 packets output, 155397640002650 bytes
Sent 8572933 broadcasts, 41653572 multicast
62 output errors <================





i-sw-5#show int et03
Ethernet3 is up, line protocol is up (connected)
Hardware is Ethernet, address is 001c.732b.af3f (bia 001c.732b.af3f)
Description: node3 eth4
MTU 9212 bytes, BW 10000000 Kbit
Full-duplex, 10Gb/s, auto negotiation: off
Up 17 hours, 16 minutes, 7 seconds
Last clearing of "show interface" counters never
5 minutes input rate 6.56 Mbps (0.1% with framing), 2873 packets/sec
5 minutes output rate 7.08 Mbps (0.1% with framing), 2908 packets/sec
188623696073 packets input, 141599556051470 bytes
Received 40 broadcasts, 1758966 multicast
0 runts, 0 giants
0 input errors, 0 CRC, 0 alignment, 0 symbol
0 PAUSE input
197238433390 packets output, 155399049324805 bytes
Sent 8573228 broadcasts, 41655847 multicast
62 output errors, 0 collisions <================
0 late collision, 0 deferred
0 PAUSE output


-----------------------------------------------------------------

Try to replace the cables and then the switch.

Thanks Keruskerfuerst