I marked my previous post as solved and maybe nobody can reply there but me,
Just in case i made a new thread..
I was about to add another NIC to my box to replace the ip aliases config i did and well, i dont have any more PCI slots...
Regardless of the security issue discussed in the thread about the insecurity with differents subnets in the same segment, check please if this config is "enough"
eth2 -> 192.168.1.0
eth2:0 ->192.168.50.0
eth1 and eth0 are the net interfaces, 1 router each to provide wan failover (not implemented here)
Hosts:
Quote:
loc1 eth2:192.168.1.0/24
loc50 eth2:192.168.50.0/24
|
Interfaces
Quote:
net6 eth0 detect
net7 eth1 detect
- eth2 192.168.1.255,192.168.50.255
|
Masq
Quote:
eth0 eth2
eth1 eth2
eth2 eth2
|
Policy
Rules
SECTION NEW
Zones
Quote:
fw firewall
net6 ipv4
net7 ipv4
loc1 ipv4
loc50 ipv4
|
Problems / Doubs:
1) Is the hosts file required?
2) I guess i need doing masq from local to each external, and also from local to local even if they share the same interface, hence the eth2 eth2 in the masq file...
3) So is shorewall well implemented in these scritps to handle aliases?