Hi,
The default route that I am receiving from my BGP peer is not being installed in my linux routing table. I have setup BGP on a cisco router with similar configuration to this and the deafult route got installed in the routing table. Please advise.
Below are the relevant details
bgpd.conf
Code:
Current configuration:
!
hostname routerx
password letmein
log stdout
!
router bgp 2000
bgp router-id 200.73.66.9
network 200.73.66.0/23
neighbor 90.60.244.209 remote-as 1000
!
ip prefix-list adv-external seq 10 permit 200.73.64.0/20
ip prefix-list adv-external seq 100 deny any
!
line vty
!
end
zebra.conf
Code:
Current configuration:
!
hostname routerx
password letmein
log file /var/log/quagga/zebra.log informational
log stdout
!
interface eth0
ipv6 nd suppress-ra
!
interface eth1
ipv6 nd suppress-ra
!
interface eth2
ipv6 nd suppress-ra
!
interface eth3
ipv6 nd suppress-ra
!
interface lo
!
interface sit0
ipv6 nd suppress-ra
!
ip forwarding
!
!
line vty
!
end
Code:
routerx# sh ip bgp neighbors 90.60.244.209 routes
BGP table version is 0, local router ID is 200.73.66.9
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0 90.60.244.209 0 0 1000 i
[root@routerX quagga]# rpm -qa | grep quagga
quagga-0.98.6-5.el5_5.1
[root@routerX quagga]# uname -a
Linux routerX.telecom2.net 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:35 EDT 2010 i686 i686 i386 GNU/Linux
[root@routerX quagga]# cat /etc/issue
CentOS release 5.5 (Final)
Kernel \r on an \m
Thanks,
--Athiq
