I'm trying to connect with these 3 but i'm getting troubled.
i've installed the speedtouch driver, and loaded de uhci module, but when I run the speedtouch-start it freezes on the preliminary USB modules, and the /var/log/messages don't show any error message. so i've tried in another tty adsl-start, and it gets the following:

TIMED OUT
line 194: 2512 Terminated $connect "#@" /dev/null 2>81

(the numbers here may vary)

I don't know what else can I try, somebody does?

could you post these please?

There is alot of configurations to play with here so we need a starting point.

Here you are:

root@darkstar:~# lsmod
Module Size Used by Not tainted
usb-uhci 21936 0 (unused)
usbcore 58860 1 [usb-uhci]
ide-scsi 9392 0
agpgart 45092 0 (unused)
root@darkstar:~# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 06b9:4061 Alcatel Telecom Speed Touch ISDN or ADSL Modem
root@darkstar:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4] (rev 04)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 10)
00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 10)
00:07.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 10)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:0a.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02)
00:0d.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i7 (rev 5d)
root@darkstar:~# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

According to this website

http://www.linux-usb.org/SpeedTouch/

You need to have more USB drivers present. Recompiling the kernel is your next step in order to support this.

Cheers