[root@localhost ~]# /sbin/lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: nVidia Corporation C51 [Geforce 6150 Go] (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 Network controller: Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card (rev 01)
07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
07:05.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
07:05.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)

Here is the deal. I just installed Fedora 7 which i dual boot with Vista. I have been trying to get my Broadcom Wireless card working for days now. I finally got the driver to load and not give me "invalid driver" error message. I am now to the point where I am trying to get wlan0 to aquire an ip with no luck. Here is the info from iwconfig and iwlist

[root@localhost ~]# iwconfig wlan0
wlan0 IEEE 802.11g ESSID:"belkin54g"
Mode:Managed Frequency:2.462 GHz Access Point: 00:17:3F:5F:98B
Bit Rate=12 Mb/s
Retry min limit:7 RTS thrff Fragment thr=2346 B
Encryption keyff
Link Quality=218/146 Signal level=-214 dBm Noise level=-72 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@localhost ~]# iwlist scan
lo Interface doesn't support scanning.

eth1 Interface doesn't support scanning.

wmaster0 Interface doesn't support scanning.

wlan0 Scan completed :
Cell 01 - Address: 00:14:BF6:9A:15
ESSID:"linksys"
Mode:Master
Channel:6
Frequency:2.437 GHz
Quality=189/146 Signal level=-218 dBm Noise level=-71 dBm
Encryption keyn
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:tsf=0000002f7692e189
Cell 02 - Address: 00:14:BFA:B8:47
ESSID:"MuskCoLib"
Mode:Master
Channel:6
Frequency:2.437 GHz
Quality=178/146 Signal level=-225 dBm Noise level=-71 dBm
Encryption keyff
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:tsf=0000028a843b9189
Cell 03 - Address: 00:17:3F:5F:98B
ESSID:"belkin54g"
Mode:Master
Channel:11
Frequency:2.462 GHz
Quality=206/146 Signal level=-207 dBm Noise level=-71 dBm
Encryption keyff
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s
48 Mb/s; 54 Mb/s
Extra:tsf=00000076165b828e
The belkin router is the one I am trying to connect to.

Thanks in advance for any help. I am really new to all of this, so a response in something other than greek would be appeciated.