|
How to mount a card connected via firewire
Hi all,
I connected a digicam via firewire (It don't have USB) but I don't know how to mount it into the filesystem.
The "/sbin/lsmod" shows:
ohci1394 29360 0
ieee1394 87992 1 ohci1394
the "/bin/dmesg | tail" shows:
pccard: CardBus card inserted into slot 0
ieee1394: Initialized config rom entry `ip1394'
PCI: Enabling device 0000:03:00.0 (0010 -> 0012)
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c2000000-c20007ff] Max Packet=[1024] IR/IT contexts=[4/4]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004c0100000264]
SFW2-OUT-ERROR IN= OUT=ath0 SRC=192.168.178.20 DST=204.13.168.64 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=TCP SPT=12001 DPT=80 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=192.168.201.1 DST=224.0.0.251 LEN=67 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=47
SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=192.168.46.1 DST=224.0.0.251 LEN=67 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=47
I connected the firewire via a CardBus adapter card to my IBM T40 under SuSE 10.1
If somebody could help me... I don't know how to get the files from the digicam to my filesystem.
Thanks
Achim
|
