Linux - Hardware This forum is for Hardware issues.
Notices
Welcome to
LinuxQuestions.org , a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free.
Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
Are you new to LinuxQuestions.org? Visit the following links:
Site Howto |
Site FAQ |
Sitemap |
Register Now
If you have any problems with the registration process or your account login, please
contact us . If you need to reset your password,
click here .
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a
virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month.
Click here for more info.
#1
LQ Newbie
Registered: Sep 2011
Posts: 6
Rep:
Hard Disk problem
Hello World!
I check every day our Server log and i receive this message from last 2 weeks:
Code:
ata4: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen
ata4: edma_err_cause=00000020 pp_flags=00000000, SError=00180000
ata4: SError: { 10B8B Dispar }
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
Which of my disks is ata4 ?
Here the command lshw :
Let me know if you need other infos.
Many thanks,
p.
Code:
localhost.localdomain
description: Desktop Computer
product: To Be Filled By O.E.M.
vendor: To Be Filled By O.E.M.
version: To Be Filled By O.E.M.
serial: To Be Filled By O.E.M.
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=00020003-0004-0005-0006-000700080009
*-core
description: Motherboard
product: AM2NF6G-VSTA
physical id: 0
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: P1.70 (11/22/2006)
size: 64KiB
capacity: 448KiB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot
*-cpu:0
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
vendor: Advanced Micro Devices [AMD]
physical id: 3
bus info: cpu@0
version: 15.11.2
serial: To Be Filled By O.E.M.
slot: CPUSocket
size: 2GHz
capacity: 2GHz
width: 64 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy cpufreq
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 512KiB
capacity: 1MiB
capabilities: pipeline-burst internal varies unified
*-memory:0
description: System Memory
physical id: 10
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DDR2 Synchronous 533 MHz (1.9 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 1GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:1
description: DIMM DDR2 Synchronous 533 MHz (1.9 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 1GiB
width: 64 bits
clock: 533MHz (1.9ns)
*-bank:2
description: DIMM [empty]
product: PartNum2
vendor: Manufacturer2
physical id: 2
serial: SerNum2
slot: DIMM2
*-bank:3
description: DIMM [empty]
product: PartNum3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
*-cpu:1
physical id: 4
bus info: cpu@1
version: 15.11.2
size: 2GHz
capacity: 2GHz
capabilities: cpufreq
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 512KiB
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: MCP61 LPC Bridge
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-serial
description: SMBus
product: MCP61 SMBus
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0
resources: irq:11 ioport:dc00(size=64) ioport:5000(size=64) ioport:6000(size=64)
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-usb:0
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:22 memory:dfcff000-dfcfffff
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.31.6-server-1mnb ohci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=8 speed=12.0MB/s
*-usb
description: Mouse
product: USB-PS/2 Optical Mouse
vendor: Logitech
physical id: 2
bus info: usb@1:2
version: 11.10
capabilities: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
*-usb:1
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:21 memory:dfcfec00-dfcfecff
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.31.6-server-1mnb ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480.0MB/s
*-usb:0
description: Mass storage device
product: External
vendor: Generic
physical id: 3
bus info: usb@2:3
logical name: scsi8
version: 1.03
serial: 57442D574341565932333734
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=2mA speed=480.0MB/s
*-disk
description: SCSI Disk
product: External
vendor: Generic
physical id: 0.0.0
bus info: scsi@8:0.0.0
logical name: /dev/sde
version: 1.03
serial: WD-WCAVY2374707
size: 1863GiB (2TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=4
*-volume
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@8:0.0.0,1
logical name: /dev/sde1
logical name: /mnt/storage5
version: 1.0
serial: 7aff198f-7062-4dbf-9efa-fc2ef31c298a
size: 1863GiB
capacity: 1863GiB
capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2010-03-31 11:52:17 filesystem=ext3 modified=2011-09-12 16:11:20 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback mounted=2011-09-12 16:11:20 state=mounted
*-usb:1
description: Mass storage device
product: My Book 1140
vendor: Western Digital
physical id: 4
bus info: usb@2:4
logical name: scsi9
version: 10.03
serial: 574341563552363539383738
capabilities: usb-2.10 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=8mA speed=480.0MB/s
*-disk
description: SCSI Disk
product: My Book 1140
vendor: WD
physical id: 0.0.0
bus info: scsi@9:0.0.0
logical name: /dev/sdf
version: 1003
serial: WCAV5R659878
size: 931GiB (1TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=6 signature=0002de38
*-volume
description: Windows NTFS volume
physical id: 1
bus info: scsi@9:0.0.0,1
logical name: /dev/sdf1
logical name: /mnt/storage3
version: 3.1
serial: 6c38-37d2
size: 931GiB
capacity: 931GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2011-03-10 18:40:11 filesystem=ntfs label=My Book mount.fstype=fuseblk mount.options=rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
*-enclosure UNCLAIMED
description: SCSI Enclosure
product: SES Device
vendor: WD
physical id: 0.0.1
bus info: scsi@9:0.0.1
version: 1003
serial: WCAV5R659878
configuration: ansiversion=6
*-pci:0
description: PCI bridge
product: MCP61 PCI bridge
vendor: nVidia Corporation
physical id: 100
bus info: pci@0000:00:04.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
resources: ioport:e000(size=4096) memory:dfd00000-dfffffff
*-network
description: Ethernet interface
product: RTL8139 Ethernet
vendor: D-Link System Inc
physical id: 8
bus info: pci@0000:01:08.0
logical name: eth0
version: 10
serial: 00:05:5d:cf:fb:51
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.0.4 latency=32 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
resources: irq:18 ioport:e800(size=256) memory:dffffc00-dffffcff
*-storage
description: RAID bus controller
product: Serial ATA II RAID 1420SA
vendor: Adaptec
physical id: a
bus info: pci@0000:01:0a.0
logical name: scsi0
logical name: scsi1
logical name: scsi2
logical name: scsi3
version: 01
width: 64 bits
clock: 66MHz
capabilities: storage pm msi pcix bus_master cap_list emulated
configuration: driver=sata_mv latency=32
resources: irq:19 memory:dfe00000-dfefffff ioport:e400(size=256)
*-disk:0
description: ATA Disk
product: ST3500630NS
vendor: Seagate
physical id: 0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 3.AE
serial: 5QG126W8
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=32c6d3ee
*-volume:0
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: 673ad90c-f676-422b-93fa-38d9d1364ec1
size: 12GiB
capacity: 12GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2010-01-11 12:17:16 filesystem=ext4 lastmountpoint=/LT�ƀR����}���>���ï����ï�����ï����R��>��>�M���R���+�X modified=2011-07-20 10:59:36 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,data=ordered mounted=2011-07-20 10:59:36 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
size: 453GiB
capacity: 453GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 3992MiB
capabilities: nofs
*-logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/sda6
logical name: /home
capacity: 449GiB
configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,data=ordered state=mounted
*-disk:1
description: ATA Disk
product: ST3500630NS
vendor: Seagate
physical id: 1
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: 3.AE
serial: 5QG0ZVWL
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=08331d8e
*-volume
description: Linux filesystem partition
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sdb1
capacity: 465GiB
capabilities: primary
*-disk:2
description: ATA Disk
product: WDC WD20EARS-00M
vendor: Western Digital
physical id: 2
bus info: scsi@2:0.0.0
logical name: /dev/sdc
version: 51.0
serial: WD-WCAZA3717178
size: 1863GiB (2TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5
*-volume
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sdc1
logical name: /mnt/storage1
version: 1.0
serial: a31b9a98-0cd7-4dea-9368-9693555d4a93
size: 1863GiB
capacity: 1863GiB
capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2011-07-20 11:21:37 filesystem=ext3 modified=2011-07-21 14:27:25 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback mounted=2011-07-21 14:27:25 state=mounted
*-disk:3
description: ATA Disk
product: ST3500630NS
vendor: Seagate
physical id: 3
bus info: scsi@3:0.0.0
logical name: /dev/sdd
version: 3.AE
serial: 5QG0ZXAD
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=5a4bc368
*-volume
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sdd1
logical name: /mnt/storage4
version: 1.0
serial: 7d184c6e-0d97-4122-8e8a-46c0f378d3ac
size: 465GiB
capacity: 465GiB
capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2010-04-08 10:29:22 filesystem=ext3 modified=2011-07-20 11:13:25 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback mounted=2011-07-20 11:13:25 state=mounted
*-multimedia
description: Audio device
product: MCP61 High Definition Audio
vendor: nVidia Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:dfcf8000-dfcfbfff
*-ide:0
description: IDE interface
product: MCP61 IDE
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
logical name: scsi6
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list emulated
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-cdrom
description: DVD writer
product: DRW-1604P
vendor: ASUS
physical id: 0.0.0
bus info: scsi@6:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
logical name: /media/cdrom
version: 1.09
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,nosuid,nodev,relatime,iocharset=utf8 state=mounted status=ready
*-medium
physical id: 0
logical name: /dev/cdrom
logical name: /media/cdrom
capabilities: partitioned partitioned:dos
configuration: mount.fstype=iso9660 mount.options=ro,nosuid,nodev,relatime,iocharset=utf8 signature=a87805f2 state=mounted
*-volume UNCLAIMED
description: Hidden HPFS/NTFS partition
physical id: 1
capacity: 4363MiB
capabilities: primary bootable hidden
*-bridge
description: Ethernet interface
product: MCP61 Ethernet
vendor: nVidia Corporation
physical id: 7
bus info: pci@0000:00:07.0
logical name: eth1
version: a2
serial: 00:13:8f:fd:1c:87
capacity: 100000000
width: 32 bits
clock: 66MHz
capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII
resources: irq:27 memory:dfcfd000-dfcfdfff ioport:d480(size=8)
*-ide:1
description: IDE interface
product: MCP61 SATA Controller
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:23 ioport:e00(size=8) ioport:e20(size=4) ioport:e40(size=8) ioport:e60(size=4) ioport:c880(size=16) memory:dfcfc000-dfcfcfff
*-pci:1
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:24
*-pci:2
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:25
*-pci:3
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:26
*-display UNCLAIMED
description: VGA compatible controller
product: C61 [GeForce 6100 nForce 405]
vendor: nVidia Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a2
width: 64 bits
clock: 66MHz
capabilities: pm msi vga_controller bus_master cap_list
configuration: latency=0
resources: memory:de000000-deffffff memory:c0000000-cfffffff(prefetchable) memory:dd000000-ddffffff memory:dfcc0000-dfcdffff(prefetchable)
*-pci:4
description: Host bridge
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k8temp
resources: irq:0
#2
LQ Guru
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,296
a Bit much for reading. Why not interrogate them
#3
LQ Newbie
Registered: Sep 2011
Posts: 6
Original Poster
Rep:
Quote:
Originally Posted by
business_kid
a Bit much for reading. Why not interrogate them
Hello,
I try this command on my HDs but i don't know which of these disks are ata4.
Could you help me please ?
Here the output:
Code:
/dev/sda:
ATA device, with non-removable media
Model Number: ST3500630NS
Serial Number: 5QG126W8
Firmware Revision: 3.AEG
Standards:
Supported: 7 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
cache/buffer size = 16384 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = ?
Advanced power management level: 254
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
64-bit World wide name
Time Limited Commands (TLC) feature set
Command Completion Time Limit (CCTL)
* Gen1 signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Code:
/dev/sdb:
ATA device, with non-removable media
Model Number: ST3500630NS
Serial Number: 5QG0ZVWL
Firmware Revision: 3.AEG
Standards:
Supported: 7 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
cache/buffer size = 16384 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = ?
Advanced power management level: 254
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
64-bit World wide name
Time Limited Commands (TLC) feature set
Command Completion Time Limit (CCTL)
* Gen1 signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Code:
/dev/sdc:
ATA device, with non-removable media
Model Number: WDC WD20EARS-00MVWB0
Serial Number: WD-WCAZA3717178
Firmware Revision: 51.0AB51
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 3907029168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 1907729 MBytes
device size with M = 1000*1000: 2000398 MBytes (2000 GB)
cache/buffer size = unknown
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* NCQ priority information
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
374min for SECURITY ERASE UNIT. 374min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee2057461fd
NAA : 5
IEEE OUI : 0014ee
Unique ID : 2057461fd
Checksum: correct
Code:
/dev/sdd:
ATA device, with non-removable media
Model Number: ST3500630NS
Serial Number: 5QG0ZXAD
Firmware Revision: 3.AEG
Standards:
Supported: 7 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
cache/buffer size = 16384 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = ?
Advanced power management level: 254
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
64-bit World wide name
Time Limited Commands (TLC) feature set
Command Completion Time Limit (CCTL)
* Gen1 signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Code:
/dev/sde:
ATA device, with non-removable media
Model Number: WDC WD20EARS-00S8B1
Serial Number: WD-WCAVY2374707
Firmware Revision: 80.00A80
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 3907029168
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 1907729 MBytes
device size with M = 1000*1000: 2000398 MBytes (2000 GB)
cache/buffer size = unknown
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* NCQ priority information
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
416min for SECURITY ERASE UNIT. 416min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee204010274
NAA : 5
IEEE OUI : 0014ee
Unique ID : 204010274
Checksum: correct
#4
LQ Guru
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,296
That looks like the -I output instead of -i. Here's My old ide disk:
Code:
hdparm -i /dev/sda
/dev/sda:
HDIO_DRIVE_CMD(identify) failed: Bad address
Model=SAMSUNG SP1613N, FwRev=VB100-50, SerialNo=S0CVJ1CQ100175
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?16?
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=312581808
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: unknown: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
You will see this box is on udma5 (=ata5)
#5
LQ Newbie
Registered: Sep 2011
Posts: 6
Original Poster
Rep:
Quote:
Originally Posted by
business_kid
That looks like the -I output instead of -i. Here's My old ide disk:
Code:
hdparm -i /dev/sda
/dev/sda:
HDIO_DRIVE_CMD(identify) failed: Bad address
Model=SAMSUNG SP1613N, FwRev=VB100-50, SerialNo=S0CVJ1CQ100175
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?16?
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=312581808
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: unknown: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
You will see this box is on udma5 (=ata5)
Hi Business Kid,
Thanx for you reply. I try hdparm -i on my disks but the value "UDMA modes" always have same value.
Do you know other linux command to identify which is ata4 please?
Many thanks,
p.
Code:
/dev/sda:
Model=ST3500630NS, FwRev=3.AEG, SerialNo=5QG126W8
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
[root@localhost pietro]# hdparm -i /dev/sdb
/dev/sdb:
Model=ST3500630NS, FwRev=3.AEG, SerialNo=5QG0ZVWL
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
[root@localhost pietro]# hdparm -i /dev/sdc
/dev/sdc:
Model=WDC WD20EARS-00MVWB0, FwRev=51.0AB51, SerialNo=WD-WCAZA3717178
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=3907029168
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
[root@localhost pietro]#
[root@localhost pietro]# hdparm -i /dev/sda
/dev/sda:
Model=ST3500630NS, FwRev=3.AEG, SerialNo=5QG126W8
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
[root@localhost pietro]# hdparm -i /dev/sdb
/dev/sdb:
Model=ST3500630NS, FwRev=3.AEG, SerialNo=5QG0ZVWL
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
[root@localhost pietro]# hdparm -i /dev/sdc
/dev/sdc:
Model=WDC WD20EARS-00MVWB0, FwRev=51.0AB51, SerialNo=WD-WCAZA3717178
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=3907029168
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
[root@localhost pietro]# hdparm -i /dev/sdd
/dev/sdd:
Model=ST3500630NS, FwRev=3.AEG, SerialNo=5QG0ZXAD
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
[root@localhost pietro]#
#6
Senior Member
Registered: Jul 2009
Location: Virginia
Distribution: Debian Stable Testing Sid Slackware CentOS
Posts: 1,055
Rep:
Have you tried lshw?
#7
LQ Newbie
Registered: Sep 2011
Posts: 4
Rep:
I think is the device : /dev/sdd ...!!
#8
LQ Newbie
Registered: Sep 2011
Posts: 6
Original Poster
Rep:
Quote:
Originally Posted by
markos87
I think is the device : /dev/sdd ...!!
Hello Markos,
I try to umount this device now so i'll inform you if anything will be change.
Thanks,
p.
#9
LQ Newbie
Registered: Sep 2011
Posts: 6
Original Poster
Rep:
Quote:
Originally Posted by
etech3
Have you tried lshw?
Hi etech!
Yes in my first post you can read the output but i didn't find any information about which disk was assigned to ata4.
;-(
thx
p.
#10
LQ Newbie
Registered: Sep 2011
Posts: 6
Original Poster
Rep:
Quote:
Originally Posted by
mrpeter
Hello Markos,
I cleaned the output of dmesg but the message come back again...so is not sdd device ;-(
#11
LQ Guru
Registered: Jan 2006
Location: Ireland
Distribution: Slackware, Slarm64 & Android
Posts: 16,296
Quote:
Originally Posted by
mrpeter
Hi Business Kid,
Thanx for you reply. I try hdparm -i on my disks but the value "UDMA modes" always have same value.
Do you know other linux command to identify which is ata4 please?
Many thanks,
Code:
/dev/sda:
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
* signifies the current active mode
[root@localhost pietro]# hdparm -i /dev/sdb
/dev/sdb:
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
* signifies the current active mode
[root@localhost pietro]# hdparm -i /dev/sdc
/dev/sdc:
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
* signifies the current active mode
[root@localhost pietro]# hdparm -i /dev/sdd
/dev/sdd:
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
* signifies the current active mode
ATA Standards
Your drives all appear to be on ATA 6. Go figure.
Last edited by business_kid; 09-15-2011 at 02:39 AM .
All times are GMT -5. The time now is 09:39 AM .
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know .
