It would not let me display it all at once so here is the rest.

[ 0.625394] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.625394] system 00:00: iomem range 0xd5800-0xd7fff has been reserved
[ 0.625394] system 00:00: iomem range 0xf0000-0xfbfff could not be reserved
[ 0.625394] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.625394] system 00:00: iomem range 0x1fef0000-0x1fefffff could not be reserved
[ 0.625394] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.625394] system 00:00: iomem range 0x100000-0x1feeffff could not be reserved
[ 0.625394] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.625394] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.625394] system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.625394] system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.628043] system 00:00: iomem range 0xe0000-0xeffff has been reserved
[ 0.628108] system 00:02: ioport range 0x400-0x4bf could not be reserved
[ 0.628171] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.628227] system 00:03: ioport range 0x800-0x87f has been reserved
[ 0.663811] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.663871] pci 0000:00:1e.0: IO window: disabled
[ 0.663929] pci 0000:00:1e.0: MEM window: 0xec000000-0xedffffff
[ 0.664002] pci 0000:00:1e.0: PREFETCH window: 0x00000020000000-0x000000200fffff
[ 0.664090] pci 0000:00:1e.0: setting latency timer to 64
[ 0.664096] bus: 00 index 0 io port: [0, ffff]
[ 0.664149] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.664202] bus: 01 index 0 mmio: [0, 0]
[ 0.664253] bus: 01 index 1 mmio: [ec000000, edffffff]
[ 0.664307] bus: 01 index 2 mmio: [20000000, 200fffff]
[ 0.664361] bus: 01 index 3 io port: [0, ffff]
[ 0.664413] bus: 01 index 4 mmio: [0, ffffffff]
[ 0.664483] NET: Registered protocol family 2
[ 0.664773] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.665185] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.665380] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.665559] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.665617] TCP reno registered
[ 0.665821] NET: Registered protocol family 1
[ 0.666075] checking if image is initramfs... it is
[ 1.164010] Switched to high resolution mode on CPU 0
[ 1.623067] Freeing initrd memory: 8002k freed
[ 1.623516] Simple Boot Flag at 0x59 set to 0x1
[ 1.624477] audit: initializing netlink socket (disabled)
[ 1.624564] type=2000 audit(978307428.624:1): initialized
[ 1.630969] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.634857] VFS: Disk quotas dquot_6.5.1
[ 1.635083] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.635317] msgmni has been set to 1001
[ 1.635583] io scheduler noop registered
[ 1.635638] io scheduler anticipatory registered
[ 1.635691] io scheduler deadline registered
[ 1.635765] io scheduler cfq registered (default)
[ 1.635839] pci 0000:00:02.0: Boot video device
[ 1.637018] isapnp: Scanning for PnP cards...
[ 1.991079] isapnp: No Plug & Play device found
[ 2.065332] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.065576] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.067010] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.070504] brd: module loaded
[ 2.070693] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.070980] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.071038] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.071738] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.072559] mice: PS/2 mouse device common for all mice
[ 2.072895] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.072979] rtc0: alarms up to one month
[ 2.073250] EISA: Probing bus 0 at eisa.0
[ 2.073344] EISA: Detected 0 cards.
[ 2.073398] cpuidle: using governor ladder
[ 2.073450] cpuidle: using governor menu
[ 2.074324] TCP cubic registered
[ 2.074427] Using IPI No-Shortcut mode
[ 2.074919] registered taskstats version 1
[ 2.075117] Magic number: 1:550:50
[ 2.075360] rtc_cmos 00:05: setting system clock to 2001-01-01 00:03:50 UTC (978307430)
[ 2.075431] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.075485] EDD information not available.
[ 2.076315] Freeing unused kernel memory: 424k freed
[ 2.076439] Write protecting the kernel text: 2576k
[ 2.076533] Write protecting the kernel read-only data: 936k
[ 2.097724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.295097] fuse init (API version 7.9)
[ 2.333144] processor ACPI0007:00: registered as cooling_device0
[ 2.333215] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 2.758321] usbcore: registered new interface driver usbfs
[ 2.758423] usbcore: registered new interface driver hub
[ 2.762113] usbcore: registered new device driver usb
[ 2.781869] USB Universal Host Controller Interface driver v3.0
[ 2.782016] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.782083] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.782089] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.782222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.782329] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d000
[ 2.782663] usb usb1: configuration #1 chosen from 1 choice
[ 2.782764] hub 1-0:1.0: USB hub found
[ 2.782830] hub 1-0:1.0: 2 ports detected
[ 2.884464] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.884541] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.884547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.884638] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.884744] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
[ 2.884969] usb usb2: configuration #1 chosen from 1 choice
[ 2.885067] hub 2-0:1.0: USB hub found
[ 2.885130] hub 2-0:1.0: 2 ports detected
[ 3.063846] No dock devices found.
[ 3.092516] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.092594] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.092600] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.092694] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.092804] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 3.093031] usb usb3: configuration #1 chosen from 1 choice
[ 3.093135] hub 3-0:1.0: USB hub found
[ 3.093198] hub 3-0:1.0: 2 ports detected
[ 3.138351] SCSI subsystem initialized
[ 3.196569] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.196655] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.196661] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.196762] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 3.200747] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 3.200769] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee080000
[ 3.212048] libata version 3.00 loaded.
[ 3.224104] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 3.236063] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.236440] usb usb4: configuration #1 chosen from 1 choice
[ 3.236541] hub 4-0:1.0: USB hub found
[ 3.236608] hub 4-0:1.0: 6 ports detected
[ 3.292101] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 3.450308] ata_piix 0000:00:1f.1: version 2.12
[ 3.450336] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.450483] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.451113] scsi0 : ata_piix
[ 3.452135] scsi1 : ata_piix
[ 3.453622] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 3.453682] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.632425] ata1.00: ATA-8: WDC WD1600AAJB-00WRA0, 58.01H58, max UDMA/100
[ 3.632491] ata1.00: 312581808 sectors, multi 16: LBA48
[ 3.648869] ata1.00: configured for UDMA/100
[ 3.820386] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0D20, max UDMA/33
[ 3.820480] ata2.01: ATAPI: SAMSUNG CD-R/RW SW-248F, R602, max UDMA/33
[ 3.836319] ata2.00: configured for UDMA/33
[ 3.852495] ata2.01: configured for UDMA/33
[ 3.852754] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJB-0 58.0 PQ: 0 ANSI: 5
[ 3.856166] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0D20 PQ: 0 ANSI: 5
[ 3.858091] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-248F R602 PQ: 0 ANSI: 5
[ 3.858390] b44 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.865026] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 3.916152] ssb: Sonics Silicon Backplane found on PCI device 0000:01:09.0
[ 3.921573] b44.c:v2.0
[ 3.940579] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0b:db:28:46:e2
[ 4.046955] usb 2-2: configuration #1 chosen from 1 choice
[ 4.249389] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.249509] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.249629] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 4.292604] Driver 'sd' needs updating - please use bus_type methods
[ 4.296082] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.296187] sd 0:0:0:0: [sda] Write Protect is off
[ 4.296242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.296297] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.296502] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.296586] sd 0:0:0:0: [sda] Write Protect is off
[ 4.296641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.296693] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.296766] sda: sda1 sda2 sda3
[ 4.305980] Driver 'sr' needs updating - please use bus_type methods
[ 4.322370] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.339932] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.340064] Uniform CD-ROM driver Revision: 3.20
[ 4.340294] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.344495] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 4.344734] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 4.436298] usbcore: registered new interface driver hiddev
[ 4.451154] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
[ 4.460452] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2
[ 4.460702] usbcore: registered new interface driver usbhid
[ 4.460760] usbhid: v2.6:USB HID core driver
[ 4.656609] PM: Starting manual resume from disk
[ 4.656668] PM: Resume from partition 8:2
[ 4.656671] PM: Checking hibernation image.
[ 4.656947] PM: Resume from disk failed.
[ 4.725117] kjournald starting. Commit interval 5 seconds
[ 4.725200] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.070794] udevd version 124 started
[ 10.941168] Linux agpgart interface v0.103
[ 11.040371] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 11.040616] agpgart-intel 0000:00:00.0: detected 892K stolen memory
[ 11.181909] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.188022] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 11.218198] iTCO_vendor_support: vendor-support=0
[ 11.269350] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.275691] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 11.275908] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
[ 11.276227] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.330491] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.341542] ACPI: Power Button (FF) [PWRF]
[ 11.341796] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 11.356055] ACPI: Power Button (CM) [PWRB]
[ 11.386018] intel_rng: FWH not detected
[ 12.547260] parport_pc 00:0a: reported by Plug and Play ACPI
[ 12.547362] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 13.660386] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 13.660492] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 13.809983] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.080038] intel8x0_measure_ac97_clock: measured 54396 usecs
[ 14.080176] intel8x0: clocking to 48000
[ 14.203650] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.046265] lp0: using parport0 (interrupt-driven).
[ 17.189434] Adding 498004k swap on /dev/sda2. Priority:-1 extents:1 across:498004k
[ 17.583778] EXT3 FS on sda3, internal journal
[ 18.360499] type=1505 audit(978329046.440:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3722
[ 18.360981] type=1505 audit(978329046.440:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3722
[ 18.421681] type=1505 audit(978329046.500:4): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=3726
[ 18.582870] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 91.798411] ACPI: WMI: Mapper loaded
[ 92.720545] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 92.945856] NET: Registered protocol family 10
[ 92.948570] lo: Disabled Privacy Extensions
[ 94.083681] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 94.083692] apm: overridden by ACPI.
[ 94.324441] ppdev: user-space parallel port driver
[ 101.229558] Bluetooth: Core ver 2.13
[ 101.232415] NET: Registered protocol family 31
[ 101.232426] Bluetooth: HCI device and connection manager initialized
[ 101.232432] Bluetooth: HCI socket layer initialized
[ 101.272813] Bluetooth: L2CAP ver 2.11
[ 101.272823] Bluetooth: L2CAP socket layer initialized
[ 101.290277] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 101.290287] Bluetooth: BNEP filters: protocol multicast
[ 101.352507] Bridge firewalling registered
[ 101.375207] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 101.392431] Bluetooth: RFCOMM socket layer initialized
[ 101.392884] Bluetooth: RFCOMM TTY layer initialized
[ 101.392894] Bluetooth: RFCOMM ver 1.10
[ 101.395379] Bluetooth: SCO (Voice Link) ver 0.6
[ 101.395389] Bluetooth: SCO socket layer initialized
[ 103.191621] [drm] Initialized drm 1.1.0 20060810
[ 103.207339] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 103.207355] pci 0000:00:02.0: setting latency timer to 64
[ 103.209938] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 105.504258] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 153.816170] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 153.816180] b44: eth0: Flow control is off for TX and off for RX.
[ 153.817333] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 154.069892] PPP generic driver version 2.4.2
[ 154.104290] NET: Registered protocol family 17
[ 154.233325] NET: Registered protocol family 24
[ 163.916011] eth0: no IPv6 routers present
[ 186.449706] ppdev0: registered pardevice
[ 186.496027] ppdev0: unregistered pardevice

Here is the half the log from xorg.o.log

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux Linux-Media-Server 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686
Build Date: 24 October 2008 08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 1 00:05:29 2001
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xe0000000/0, 0xee000000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.4.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xEE000000
(II) intel(0): 1 display pipe available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 832 kB
(II) intel(0): VESA VBE OEM: Brookdale-G Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Brookdale-G Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"

(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"

(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"

(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"

(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"

(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1

And the last half of xorg.0.log

(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "DEL", prod id 40972
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): EDID vendor "DEL", prod id 40972
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 892 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(++) intel(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x80000207 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status:
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 112128 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 448508 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xee000000
(II) intel(0): [drm] ring buffer = 0xe0000000
(II) intel(0): [drm] mapped front buffer at 0xe0400000, handle = 0xe0400000
(II) intel(0): [drm] mapped back buffer at 0xe1400000, handle = 0xe1400000
(II) intel(0): [drm] mapped depth buffer at 0xe1800000, handle = 0xe1800000
(II) intel(0): [drm] mapped classic textures at 0xe1c00000, handle = 0xe1c00000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x000df000 (pgoffset 223)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00400000 (pgoffset 1024)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01400000 (pgoffset 5120)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01c00000 (pgoffset 7168)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB)
(II) intel(0): 0x00025000-0x0002cfff: logical 3D context (32 kB)
(II) intel(0): 0x000df000: end of stolen memory
(II) intel(0): 0x000df000-0x000dffff: overlay registers (4 kB, 0x000000001e127000 physical
)
(II) intel(0): 0x00400000-0x007fffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00800000-0x013fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01400000-0x017fffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01800000-0x01bfffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x03bfffff: classic textures (32768 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 260 x 195
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.99
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event2"
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
(II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) intel(0): EDID vendor "DEL", prod id 40972
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): EDID vendor "DEL", prod id 40972
AUDIT: Mon Jan 1 00:05:35 2001: 5326 X: client 4 rejected from local host ( uid=0 gid=0 pid=5488 )
AUDIT: Mon Jan 1 00:05:44 2001: 5326 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5490 )
AUDIT: Mon Jan 1 00:05:44 2001: 5326 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5491 )
AUDIT: Mon Jan 1 00:05:44 2001: 5326 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5492 )
(II) intel(0): EDID vendor "DEL", prod id 40972
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): EDID vendor "DEL", prod id 40972

I'm not seeing any errors in your xorg.o.log. ACPI is known to be troublesome. You could try disabling it by adding the entry to your /boot/grub/menu.lst file. If you post the contents of this file i will edit it to show where you should put the entry. Otherwise you would always have to remember to add it everytime you boot.

I have a guess as to what might be causing the inconsistency. Udev assigns names to physical devices on your system when the kernel boots. The kernel searches for hardware in parallel so the name that Udev assigns to a particular device is not necessarily always the same.

What you do in Udev, is create naming rules for particular hardware: Network cards, hard drivers, etc, so that those devices are always named the same thing.

It is possible that you got unlucky with the particular hardware (possibly the hard disk) that you have in that the default Ubuntu Udev rules don't work for your hardware. The solution would be to define the correct Udev rules for your hardware.

This might be wrong, but it does explain the inconsistency.---rm_dash_rf_star.

Here you go... Hope there's nothing private on any of this stuff

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aR78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=f36f6288-4ddb-4e1a-bb0f-35dc579b9d81 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=f36f6288-4ddb-4e1a-bb0f-35dc579b9d81

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.10, kernel 2.6.27-9-generic
uuid f36f6288-4ddb-4e1a-bb0f-35dc579b9d81
kernel /boot/vmlinuz-2.6.27-9-generic root=UUID=f36f6288-4ddb-4e1a-bb0f-35dc579b9d81 ro quiet splash
initrd /boot/initrd.img-2.6.27-9-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-9-generic (recovery mode)
uuid f36f6288-4ddb-4e1a-bb0f-35dc579b9d81
kernel /boot/vmlinuz-2.6.27-9-generic root=UUID=f36f6288-4ddb-4e1a-bb0f-35dc579b9d81 ro single
initrd /boot/initrd.img-2.6.27-9-generic

title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid f36f6288-4ddb-4e1a-bb0f-35dc579b9d81
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=f36f6288-4ddb-4e1a-bb0f-35dc579b9d81 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid f36f6288-4ddb-4e1a-bb0f-35dc579b9d81
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=f36f6288-4ddb-4e1a-bb0f-35dc579b9d81 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Ubuntu 8.10, memtest86+
uuid f36f6288-4ddb-4e1a-bb0f-35dc579b9d81
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Home Edition
root (hd0,0)
savedefault
makeactive
chainloader +1

So how and what do I need to try renaming.

I have nothing important on this hard disk so if I loose it all thats OK!!

Thanks
Dustin

In case you still want to disable acpi.

Be sure to make a backup copy of this file before editing.

Nope.... No luck with that either... Just not my night.

Thanks anyway...

Keep the ideas coming!!!

Anyone else have any ideas?????

My udev idea was incorrect.

Try this: following is my /etc/fstab file:

LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
/dev/sda1 swap swap defaults 0 0
/dev/sdb1 /download ext2 suid,dev,exec 0 0
/dev/sda5 /home ext3 suid,dev,exec 0 0
/dev/sda6 /usr ext3 suid,dev,exec 0 0
/dev/hda /media/cdrom auto pamconsole,fscontext=system_ubject_r:removable_t,exec,noauto,managed 0 0

The root of my filesystem is an ide hard disk, but instead of specifying that I have:

LABEL=/
Try changing this in your /etc/fstab file.

So you should have something like this:

LABEL=/ / ext3 defaults 1 1

Make sure that you put in your filesystem if you don't use ext3.

What was the exact message, and the previous 4-5 lines that the kernel gives you before it says: kernel panic?

I am assuming that the computer boots, gives you some output, and then says ... kernel panic ...

Nope it never boots and I never get a kernel panic message. I just assumed that it must have panic when it didn't boot. When it hangs, it hangs in the boot sequence somewhere.

I noticed on you menu.1st that you had no argument for the hard drive. look at mine mine is on hdc or sdc drive what ever you want to call it. this tells it what hard drive to look for. sda1 is (hd0,0) sda2 is (hd0.1)
title Ubuntu 8.04.1, kernel 2.6.24-22-generic
root (hd2,0) <--------theses are not on yours with out that it will not boot..
kernel /boot/vmlinuz-2.6.24-22-generic root=UUID=6d6554fb-b8ec-4b77-af61-e4d3ef6298f0 ro quiet splash loglevel=0
initrd /boot/initrd.img-2.6.24-22-generic
quiet

title Ubuntu 8.04.1, kernel 2.6.24-22-generic (recovery mode)
root (hd2,0)
kernel /boot/vmlinuz-2.6.24-22-generic root=UUID=6d6554fb-b8ec-4b77-af61-e4d3ef6298f0 ro single
initrd /boot/initrd.img-2.6.24-22-generic
# Linux bootable partition config ends

I edited my previous post as i had incorrectly put apci instead of acpi.