LinuxQuestions.org
View the Most Wanted LQ Wiki articles.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Fedora
User Name
Password
Fedora This forum is for the discussion of the Fedora Project.

Notices

View Poll Results: bad sector
hdd 2 66.67%
fedora 11 1 33.33%
ext4 0 0%
http://download.fedora.us/ 0 0%
Multiple Choice Poll. Voters: 3. You may not vote on this poll

Reply
 
Search this Thread
Old 06-16-2009, 03:39 PM   #1
rajatjpatel
LQ Newbie
 
Registered: Feb 2007
Posts: 7
Blog Entries: 1

Rep: Reputation: 0
Question "fedora"


hello all

i m using compaq presario 700 HW deatils as follow OS detail as follow.

as i finish my install FC11 i got error for BAD SECTOR on HDD which i try to remove using
#e2fsck -c /dev/sda1
which didnt work after that one my friend give my spinrite tool which work on bios or it can boot from cd both option i used nothing change can any one help me with pro

1 Linux chida.in 2.6.29.4-167.fc11.i686.PAE #1 SMP Wed May 27 17:28:22 EDT 2009 i686 i686 i386 GNU/Linux

2 Kernel command line: ro root=/dev/mapper/vg_chida-lv_root rhgb quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Iconsole [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 10436960 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 2048892k/2087392k available (3179k kernel code, 37264k reserved, 1935k data, 436k init, 1178016k highmem)
virtual kernel memory layout:
fixmap : 0xffc57000 - 0xfffff000 (3744 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0906000 - 0xc0973000 ( 436 kB)
.data : 0xc071ae6a - 0xc08feb78 (1935 kB)
.text : 0xc0400000 - 0xc071ae6a (3179 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.48 BogoMIPS (lpj=1862241)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
I to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI Warning (nspredef-0328): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 [20081204]
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0x91000000-0x910fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
pci 0000:00:02.0: reg 20 io port: [0x30b0-0x30b7]
pci 0000:00:02.1: reg 10 64bit mmio: [0x91100000-0x911fffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0x92400000-0x92403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x3060-0x307f]
pci 0000:00:1d.1: reg 20 io port: [0x3040-0x305f]
pci 0000:00:1d.2: reg 20 io port: [0x3020-0x303f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x92404000-0x924043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x92404400-0x924044ff]
pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
pci 0000:01:00.0: reg 10 64bit mmio: [0x91300000-0x9130ffff]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
ppci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1e.0 BAR 7 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x810-0x817 has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: ioport range 0xff2c-0xff2f has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0x91300000-0x923fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000090000000-0x00000090ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x1000-0x1fff
pci 0000:00:1e.0: MEM window: 0x91200000-0x912fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0x91300000-0x923fffff]
pci_bus 0000:01: resource 2 mem: [0x90000000-0x90ffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:02: resource 1 mem: [0x91200000-0x912fffff]
pci_bus 0000:02: resource 2 mem: [0x0-0x0]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
it is
Freeing initrd memory: 3323k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1245176412.710:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1708
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7F67CC10, 026E (r1 PmRef Cpu0Ist 3000 INTL 20051117)
ACPI: SSDT 7F67B610, 05D7 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F67CF10, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
ACPI: SSDT 7F67ED10, 0083 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (55 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input4
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3090 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3098 irq 15
ata1.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC32P, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H HS02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x92404000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT D -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003060
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003040
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Marking TSC unstable due to TSC halts in idle
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 13:382:342
Initalizing network drop monitor service
Freeing unused kernel memory: 436k freed
Write protecting the kernel read-only data: 1468k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 25 for MSI/MSI-X
Clocksource tsc unstable (delta = -136935803 ns)
usb 1-5: new high speed USB device using ehci_hcd and address 3
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
[drm] TV-13: set mode NTSC 480i 0
allocated 1280x800 fb: 0x007df000, bo f65fe5a0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
[drm] LVDS-8: set mode 1280x800 15
usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB2.0-CRW
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 20060413092100000
usb 1-5: configuration #1 chosen from 1 choice
usb 1-6: new high speed USB device using ehci_hcd and address 4
fb0: inteldrmfb frame buffer device
registered panic notifier
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
acpi device:17: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/input/input8
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 1-6: New USB device found, idVendor=064e, idProduct=c108
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Webcam-101
usb 1-6: Manufacturer: Suyin Optronics
usb 1-6: SerialNumber: CN0316-MM00-OV01-VH-R32.01.01
usb 1-6: configuration #1 chosen from 1 choice
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=12d1, idProduct=140b
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 3-1: Product: HUAWEI Mobile


usb 3-1: configuration #1 chosen from 1 choice
EXT4-fs: barriers enabled
kjournald2 starting: pid 84, dev dm-0:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem dm-0 with ordered data mode
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1245176416.298:2): selinux=0 auid=4294967295 ses=4294967295
udev: starting version 141
iTCO_vendor_support: vendor-support=0
input: PC Speaker as /devices/platform/pcspkr/input/input9
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Calling CRDA to update world regulatory domain
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: probe of 3-1:1.0 failed with error -1
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i801_smbus 0000:00:1f.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
8139too 0000:02:01.0: setting latency timer to 64
eth0: RealTek RTL8139 at 0xf859e000, 00:1e:ec:6d:25:01, IRQ 16
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: WMI: Mapper loaded
usb 3-1: USB disconnect, address 2
Linux video capture interface: v2.00
usb 3-1: new full speed USB device using uhci_hcd and address 3
ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath5k 0000:01:00.0: setting latency timer to 64
ath5k 0000:01:00.0: registered as 'phy0'
usb 3-1: New USB device found, idVendor=12d1, idProduct=140b
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 3-1: Product: HUAWEI Mobile


usb 3-1: configuration #1 chosen from 1 choice
usb-storage: probe of 3-1:1.0 failed with error -5
name_count maxed, losing inode data: dev=00:05, inode=3627

name_count maxed, losing inode data: dev=00:05, inode=3641
wmaster0 (ath5k): not using net_device_ops yet
name_count maxed, losing inode data: dev=00:05, inode=3627
name_count maxed, losing inode data: dev=00:05, inode=3656
phy0: Selected rate control algorithm 'minstrel'
usb-storage: probe of 3-1:1.1 failed with error -5
uvcvideo: Found UVC 1.00 device Webcam-101 (064e:c108)
usb-storage: probe of 3-1:1.2 failed with error -5
usb-storage: probe of 3-1:1.3 failed with error -1
input: Webcam-101 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
name_count maxed, losing inode data: dev=00:05, inode=3627
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
name_count maxed, losing inode data: dev=00:05, inode=3855
wlan0 (ath5k): not using net_device_ops yet
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
USB Serial support registered for GSM modem (1-port)
option 3-1:1.0: GSM modem (1-port) converter detected
usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
option 3-1:1.1: GSM modem (1-port) converter detected
usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
option 3-1:1.2: GSM modem (1-port) converter detected
usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
cfg80211: Calling CRDA for country: IN
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input11
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input12
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input13
cfg80211: Regulatory domain changed to country: IN
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 2000 mBm)
device-mapper: multipath: version 1.0.5 loaded
EXT4 FS on dm-0, internal journal on dm-0:8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
swap_cgroup: uses 4016 bytes of vmalloc for pointer array space and 4112384 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 4112376k swap on /dev/mapper/vg_chida-lv_swap. Priority:-1 extents:1 across:4112376k
 
Old 06-16-2009, 05:07 PM   #2
ilikejam
Senior Member
 
Registered: Aug 2003
Location: Glasgow
Distribution: Fedora / Solaris
Posts: 3,109

Rep: Reputation: 96
Your problem is that you've got a bad sector on your hard drive. You need to replace your drive.

Dave
 
Old 06-17-2009, 04:25 PM   #3
samboonline
LQ Newbie
 
Registered: Jun 2009
Posts: 7
Blog Entries: 2

Rep: Reputation: 0
Exclamation same prolm

common problm...and this is wth fedora 11......my both lapi showing same error only wth fedora 11.....though everything is fine wth the hard disk.....!
 
Old 06-19-2009, 10:53 PM   #4
GoinEasy9
Member
 
Registered: Feb 2004
Location: Manorville, New York, USA
Distribution: siduction, Fedora 19, openSUSE Tumbleweed
Posts: 379
Blog Entries: 1

Rep: Reputation: 46
What media did you use to do the install? The Live CD has problems if you don't use ext3 for the /boot partition. The DVD install disk has problems when encountering the partition part of the installer, there are some tricks on this thread on the Fedora Forums site which contained the errors I had:
http://forums.fedoraforum.org/showthread.php?t=223165
Other problems were addressed in this thread:
http://forums.fedoraforum.org/showthread.php?t=223206

This is a common problem with the installer, your bad sector errors I've seen in other threads. It's probably not your hard disk, search around, you might find the correct solution for you, depending on what your using for the installation media.
 
Old 06-20-2009, 12:57 AM   #5
rajatjpatel
LQ Newbie
 
Registered: Feb 2007
Posts: 7
Blog Entries: 1

Original Poster
Rep: Reputation: 0
DVD

thanks so much for u r update on FC11 i use DVD to install not choose ext3 with default conf i took not what i have to do get to ext3 or remove that bad sector from hdd on my laptop

rajat


Quote:
Originally Posted by GoinEasy9 View Post
What media did you use to do the install? The Live CD has problems if you don't use ext3 for the /boot partition. The DVD install disk has problems when encountering the partition part of the installer, there are some tricks on this thread on the Fedora Forums site which contained the errors I had:
http://forums.fedoraforum.org/showthread.php?t=223165
Other problems were addressed in this thread:
http://forums.fedoraforum.org/showthread.php?t=223206

This is a common problem with the installer, your bad sector errors I've seen in other threads. It's probably not your hard disk, search around, you might find the correct solution for you, depending on what your using for the installation media.
 
Old 06-20-2009, 01:16 AM   #6
saivin
Member
 
Registered: Dec 2008
Location: Bengaluru, India
Distribution: CentOS, openSUSE, Mandriva, Slackware
Posts: 111

Rep: Reputation: 19
Hi Rajat,
Firstly, whenever you are posting the output of a command or contents of a file and if it has too many lines, please use 'code' tags.

Secondly, is it the palimpsest tool which is giving this error (in the notification area)? I too was (and most others are) getting the same error. It doesn't get solved by using fsck. None of the other distros show the same error. I just uninstalled gnome and installed xfce

Let us wait to see if it is a bug in the tool itself or our drives are really screwed. Let us see how long the drive serves us. Meanwhile, keep backing up the data, though...
 
Old 06-23-2009, 06:51 AM   #7
Glennzo
Member
 
Registered: May 2003
Location: Salem, Mass USA
Distribution: Fedora
Posts: 393

Rep: Reputation: 47
If it's the Palimpsest utility throwing the error all you need to do is select System > Preferences > Startup Applications and un-check Disk Notifications. I'm fairly sure there are 1 or more bugs with Palimpsest. Palimpsest insisted that my drive was bad but Ubuntu, Vista and Windows 7 thought otherwise.

What's the point of the poll?
 
  


Reply

Tags
fedora, from, hdd, hw, remove, sector


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fedora Core 2: Screen Resolution can not change from "800X600" to "1024X 768" suhaimi_sj Fedora - Installation 18 12-17-2009 03:29 AM
Logged in as "root"/Fedora 8 but get "Operation not permitted" when using "chmod etc gosunlee Linux - Newbie 7 02-10-2008 05:56 AM
Fedora 8: Internet connection is faster in "XP" than in "Fedora 8" why. Suggestions.. mahesh_infinity Linux - General 1 12-09-2007 12:06 PM
LXer: Displaying "MyComputer", "Trash", "Network Servers" Icons On A GNOME Desktop LXer Syndicated Linux News 0 04-02-2007 08:31 AM
Porting to Fedora gcc 4.0 -parsing backward slash("\") comma(",") code_blew Programming 1 04-26-2006 04:07 PM


All times are GMT -5. The time now is 10:59 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration