LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Fedora
Reload this Page Choppy DVD playback in Xine
User Name
Password
Fedora This forum is for the discussion of the Fedora Project.

Notices


Reply
  Search this Thread
Old 01-10-2007, 11:00 AM   #1
garbo73
Member
 
Registered: Sep 2003
Posts: 59

Rep: Reputation: 15
Choppy DVD playback in Xine

I have a Compaq SR1803WM computer with a DVD-RW added to it. I have been trying to play my DVD movies on my computer and downloaded Xine as recommended by many people online. It has a built in video card on the motherboard - ATI Radeon Xpress 200.

This is the message I receive when doing a xine-check:

Code:
[will@localhost ~]$ xine-check
Please be patient, this script may take a while to run...
[ good ] you're using Linux, doing specific tests
[ good ] looks like you have a /proc filesystem mounted.
[ good ] You seem to have a reasonable kernel version (2.6.18-1.2869.fc6)
[ good ] intel compatible processor, checking MTRR support
[ good ] you have MTRR support and there are some ranges set.
[ good ] found the player at /usr/bin/xine
[ good ] /usr/bin/xine is in your PATH
[ good ] found /usr/bin/xine-config in your PATH
[ good ] plugin directory /usr/lib/xine/plugins/1.1.3 exists.
[ good ] found unknown plugin: xineplug_flac.so
[ good ] found input plugins
[ good ] found demux plugins
[ good ] found decoder plugins
[ good ] found video_out plugins
[ good ] found audio_out plugins
[ good ] skin directory /usr/share/xine/skins exists.
[ good ] found logo in /usr/share/xine/skins
[ good ] I even found some skins.
[ good ] /dev/cdrom points to /dev/hdc
[ good ] /dev/dvd points to /dev/hdc
[ good ] DMA is enabled for your DVD drive
Xlib:  extension "XVideo" missing on display ":0.0".
xvinfo: No X-Video Extension on :0.0
[ good ] found xvinfo: 
Xlib:  extension "XVideo" missing on display ":0.0".
xvinfo: No X-Video Extension on :0.0
[ hint ] Your X server doesn't support YV12 overlays.
         That means xine will have to do color space transformation and scaling
         in software, which is quite CPU intensive. Maybe upgrading your
         X server will help here.
         If you have an ATI card, you'll find accelerated X servers on
         http://www.linuxvideo.org/gatos/
         press <enter> to continue...

[ hint ] Your X server doesn't support YV12 overlays.
         That means xine will have to do color space transformation and scaling
         in software, which is quite CPU intensive. Maybe upgrading your
         X server will help here.
         If you have an ATI card, you'll find accelerated X servers on
         http://www.linuxvideo.org/gatos/
         press <enter> to continue...

[ hint ] Your X server doesn't have any XVideo support...
         XVideo is an X server extension introduced by XFree86 4.x. This
         extension provides access to hardware accelerated color space
         conversion and scaling, which gives a great performance boost.
         If you have a fast (>1GHz) machine, you may be able to watch all
         kinds of video, anyway. You will waste lots of CPU cycles, though...
         press <enter> to continue...
I cannot seem to find a way to fix this YV12 problem, have tried to add lines to my xorg.conf as suggested online but it hasn't created any help either. This is what I added:

Code:
	Option          "OpenGLOverlay"         "off"
	Option		"RenderAccel" 		"true"
	Option		"VideoOverlay"		"on"
If anyone has any suggestions I would appreciate it.

Thanks.
 
Old 01-10-2007, 11:30 AM   #2
b0uncer
LQ Guru
 
Registered: Aug 2003
Distribution: CentOS, OS X
Posts: 5,131

Rep: Reputation: Disabled
First things first; this might be all right, but let's check it out. What driver are you using for your card (found in /etc/X11/xorg.conf -- look for the sections for screen and monitor, there's a device section with your card)? I had choppy playback of DVD movies on one laptop once, and it was just because it used some vesa driver because it didn't find the correct driver automatically (had to manually change it). If your xorg.conf is using vesa or something similar, try to change it to radeon and see if it helps (restart X by pressing ctrl+alt+backspace). Another option is to install the officila ATI's fglrx drivers (first check out if your card is supported).
 
Old 01-10-2007, 01:02 PM   #3
garbo73
Member
 
Registered: Sep 2003
Posts: 59

Original Poster
Rep: Reputation: 15
Here is my entire xorg.conf - looks like I might have what you asked, still fairly new to most of this:


Code:
# Xorg configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
EndSection

Section "Module"
	Load  "dri"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "radeon"
	Option          "OpenGLOverlay" "off"
	Option		"RenderAccel" 		"true"
	Option		"VideoOverlay"		"on"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1600x1200" "1280x1024" "1024x768"
	EndSubSection
EndSection
 
Old 01-10-2007, 01:35 PM   #4
b0uncer
LQ Guru
 
Registered: Aug 2003
Distribution: CentOS, OS X
Posts: 5,131

Rep: Reputation: Disabled
Allright, your X configuration seems to be all right, at least the driver is working. Just a curiosity, if you do
Code:
glxinfo | grep direct
do you get "direct rendering: yes" or no?

Also, have you installed libdvdcss2? It might not affect the quality of the output, though, but in case some of your movies don't play, make sure it's installed.

You should also read your /var/log/Xorg.0.log and look for errors; specifically about XVideo and extmod. If XVideo isn't properly loaded, you could try to add extmod to your Module section in the xorg.conf:
Code:
Section "Module"
	Load  "dri"
	Load  "glx"
        Load  "extmod"
EndSection
I'm not too familiar with this problem, but XVideo should be working I think, so let's first make sure it is ok. That's a start at least.
 
Old 01-10-2007, 02:19 PM   #5
garbo73
Member
 
Registered: Sep 2003
Posts: 59

Original Poster
Rep: Reputation: 15
Quote:
Allright, your X configuration seems to be all right, at least the driver is working. Just a curiosity, if you do
Code:

glxinfo | grep direct

do you get "direct rendering: yes" or no?
I get this:

Code:
[will@localhost ~]$ glxinfo | grep direct
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect
It appears that I have libdvdcss2 installed already, I tried to install it and was told it was already done.

Code:
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.9-42.ELsmp i686 Red Hat, Inc.
Current Operating System: Linux localhost.localdomain 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:19 EST 2006 i686
Build Date: 09 January 2007
Build ID: xorg-x11-server 1.1.1-47.4.fc6 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 10 10:48:40 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]"
(**) |   |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(==) |-->Input Device "<default pointer>"
(WW) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
(==) FontPath set to:
	unix/:7100,
	built-ins
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.0
	X.Org XInput driver : 0.6
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) Inactive PCI resource ranges:
	[0] -1	0	0xfdde0000 - 0xfddeffff (0x10000) MX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xfddfe000 - 0xfddfefff (0x1000) MX[B]
	[1] -1	0	0xfddff000 - 0xfddff0ff (0x100) MX[B]
	[2] -1	0	0xfe024000 - 0xfe027fff (0x4000) MX[B]
	[3] -1	0	0xfe02a000 - 0xfe02a3ff (0x400) MX[B]
	[4] -1	0	0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
	[5] -1	0	0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
	[6] -1	0	0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
	[7] -1	0	0xfe02e000 - 0xfe02e1ff (0x200) MX[B]
	[8] -1	0	0xfe02f000 - 0xfe02f1ff (0x200) MX[B]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[10] -1	0	0xfdef0000 - 0xfdefffff (0x10000) MX[B](B)
	[11] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[12] -1	0	0x0000de00 - 0x0000deff (0x100) IX[B]
	[13] -1	0	0x0000f400 - 0x0000f40f (0x10) IX[B]
	[14] -1	0	0x00000b00 - 0x00000b0f (0x10) IX[B]
	[15] -1	0	0x0000f600 - 0x0000f60f (0x10) IX[B]
	[16] -1	0	0x0000f700 - 0x0000f703 (0x4) IX[B]
	[17] -1	0	0x0000f800 - 0x0000f807 (0x8) IX[B]
	[18] -1	0	0x0000f900 - 0x0000f903 (0x4) IX[B]
	[19] -1	0	0x0000fa00 - 0x0000fa07 (0x8) IX[B]
	[20] -1	0	0x0000fb00 - 0x0000fb0f (0x10) IX[B]
	[21] -1	0	0x0000fc00 - 0x0000fc03 (0x4) IX[B]
	[22] -1	0	0x0000fd00 - 0x0000fd07 (0x8) IX[B]
	[23] -1	0	0x0000fe00 - 0x0000fe03 (0x4) IX[B]
	[24] -1	0	0x0000ff00 - 0x0000ff07 (0x8) IX[B]
	[25] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
	[0] -1	0	0xfdde0000 - 0xfddeffff (0x10000) MX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xfddfe000 - 0xfddfefff (0x1000) MX[B]
	[5] -1	0	0xfddff000 - 0xfddff0ff (0x100) MX[B]
	[6] -1	0	0xfe024000 - 0xfe027fff (0x4000) MX[B]
	[7] -1	0	0xfe02a000 - 0xfe02a3ff (0x400) MX[B]
	[8] -1	0	0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
	[9] -1	0	0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
	[10] -1	0	0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
	[11] -1	0	0xfe02e000 - 0xfe02e1ff (0x200) MX[B]
	[12] -1	0	0xfe02f000 - 0xfe02f1ff (0x200) MX[B]
	[13] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[14] -1	0	0xfdef0000 - 0xfdefffff (0x10000) MX[B](B)
	[15] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[16] -1	0	0xfdde0000 - 0xfddeffff (0x10000) MX[B]
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x0000de00 - 0x0000deff (0x100) IX[B]
	[20] -1	0	0x0000f400 - 0x0000f40f (0x10) IX[B]
	[21] -1	0	0x00000b00 - 0x00000b0f (0x10) IX[B]
	[22] -1	0	0x0000f600 - 0x0000f60f (0x10) IX[B]
	[23] -1	0	0x0000f700 - 0x0000f703 (0x4) IX[B]
	[24] -1	0	0x0000f800 - 0x0000f807 (0x8) IX[B]
	[25] -1	0	0x0000f900 - 0x0000f903 (0x4) IX[B]
	[26] -1	0	0x0000fa00 - 0x0000fa07 (0x8) IX[B]
	[27] -1	0	0x0000fb00 - 0x0000fb0f (0x10) IX[B]
	[28] -1	0	0x0000fc00 - 0x0000fc03 (0x4) IX[B]
	[29] -1	0	0x0000fd00 - 0x0000fd07 (0x8) IX[B]
	[30] -1	0	0x0000fe00 - 0x0000fe03 (0x4) IX[B]
	[31] -1	0	0x0000ff00 - 0x0000ff07 (0x8) IX[B]
	[32] -1	0	0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Primary Device is: PCI 01:05:0
(II) ATI Proprietary Linux Driver Version Identifier:8.30.3
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.30g1                           
(II) ATI Proprietary Linux Driver Build Date: Oct 26 2006 08:05:19
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.30.1.1.2.3-driver-lnx-x86-x86_64-302518
(--) Assigning device section with no busID to primary device
(--) Chipset RADEON XPRESS 200 (RC410 5A61) found
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): PCI bus 1 card 5 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON XPRESS 200 (RC410 5A61)" (Chipset = 0x5a61)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x2a30)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xf0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.1.0
	ABI class: X.Org Video Driver, version 1.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 65536 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON XPRESS 200 Series
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: MS4 
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(WW) fglrx(0): Failed to open DRM connection
(--) fglrx(0): VideoRAM: 65536 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(--) fglrx(0): Display dimensions: (320, 240) mm
(--) fglrx(0): DPI set to (101, 108)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"   85.51  1280 1344 1480 1680  1024 1025 1028 1083 interlace +hsync
(**) fglrx(0):  Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"   77.80  1280 1344 1480 1680  1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808
(**) fglrx(0):  Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
(**) fglrx(0):  Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"   58.28  1152 1200 1320 1488  864 865 868 911 interlace +hsync
(**) fglrx(0):  Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"   38.16  1024 1048 1152 1280  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"   31.48  848 864 952 1056  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"   56.25  800 832 896 1048  600 601 604 631
(**) fglrx(0):  Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
(**) fglrx(0):  Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600"   29.60  800 816 896 992  600 601 604 635 interlace +hsync
(**) fglrx(0):  Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"   68.17  800 848 936 1072  600 601 604 636 +hsync
(**) fglrx(0):  Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"   60.06  800 840 928 1056  600 601 604 632 +hsync
(**) fglrx(0):  Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"   32.66  720 744 816 912  576 577 580 597 +hsync
(**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   26.71  720 736 808 896  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"   52.40  640 680 744 848  480 481 484 515 +hsync
(**) fglrx(0):  Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"   43.16  640 680 744 848  480 481 484 509 +hsync
(**) fglrx(0):  Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"   37.89  640 672 736 832  480 481 484 506 +hsync
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.30.3
	ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.

(II) fglrx(0): UMM Bus area: 0xf0701000 (size=0x038df000)
(II) fglrx(0): UMM area:     0x1c701000 (size=0x038df000)
(II) fglrx(0): Composite extension enabled, disabling direct rendering
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0x1c000000 FBMappedSize: 0x03fe0000
(II) fglrx(0): Splitting WC range: base: 0xf0000000, size: 0x3fe0000
(II) fglrx(0): Splitting WC range: base: 0xf2000000, size: 0x1fe0000
(II) fglrx(0): Splitting WC range: base: 0xf3000000, size: 0xfe0000
(II) fglrx(0): Splitting WC range: base: 0xf3800000, size: 0x7e0000
(II) fglrx(0): Splitting WC range: base: 0xf3c00000, size: 0x3e0000
(II) fglrx(0): Splitting WC range: base: 0xf3e00000, size: 0x1e0000
(II) fglrx(0): Splitting WC range: base: 0xf3f00000, size: 0xe0000
(II) fglrx(0): Splitting WC range: base: 0xf3f80000, size: 0x60000
(==) fglrx(0): Write-combining range (0xf3fc0000,0x20000)
(==) fglrx(0): Write-combining range (0xf3f80000,0x60000)
(==) fglrx(0): Write-combining range (0xf3f00000,0xe0000)
(==) fglrx(0): Write-combining range (0xf3e00000,0x1e0000)
(==) fglrx(0): Write-combining range (0xf3c00000,0x3e0000)
(==) fglrx(0): Write-combining range (0xf3800000,0x7e0000)
(WW) fglrx(0): Failed to set up write-combining range (0xf3000000,0xfe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xf2000000,0x1fe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xf0000000,0x3fe0000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
Looks like there are a couple of errors, but I am not sure what to do to fix them. I had to shorten the Xorg.0.log in order to post what errors I had, hopefully I captured enough of it forf you.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
gatos and xorg(dvd choppy playback) dohpaz Slackware 4 10-30-2006 08:31 PM
Choppy DVD playback in xine with Breezy CPUFreak91 Ubuntu 5 12-29-2005 01:33 PM
choppy DVD playback marks_linux Linux - Hardware 6 05-03-2005 07:51 AM
DVD Playback is choppy Twiggy794 Linux - Hardware 12 02-17-2004 03:37 PM
choppy xine dvd playback pootie Linux - Newbie 19 12-04-2003 08:59 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Fedora

All times are GMT -5. The time now is 01:18 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration