I have intex RTL 8139D lan card and i am using zenwalk linux kernal 2.6.16 lan card is not detected plz help in getting a drive for it

First we need to know what module it uses. what does lspci -v show? Also We don't email people on forums. That takes away from what a forum is and does.

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [0106]

00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corporation: Unknown device 4246
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at c800 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at cc00 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at d000 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at d400 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Desktop Board D865GBF
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: 20000000-200fffff

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Desktop Board D865GBF
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0 [size=16]
Memory at 20100000 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Desktop Board D865GBF
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 16
I/O ports at e800 [size=8]
I/O ports at e400 [size=4]
I/O ports at e000 [size=8]
I/O ports at dc00 [size=4]
I/O ports at d800 [size=16]

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Intel Corporation: Unknown device 4246
Flags: medium devsel, IRQ 3
I/O ports at c400 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

01:00.0 Ethernet controller: Unknown device 1904:2031 (rev 01)
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at ff8ffc00 (32-bit, non-prefetchable) [size=256]
I/O ports at b800 [size=256]
Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Vital Product Data

thank u for replay

http://www.techenclave.com/forums/re...dows-5601.html This link may help.
Now to try and activate your card. try this

i also tried this
modprobe 8139too
dhcpcd eth0

but it does not worked

i got the same lan card problem buddy.
i got rtl8139d as well

did u find any solution for it??????????? i am trying to write a driver to it but still i am in begining stage.

Please let me know if or when you resolve this lan card rtl 8139D problem, I have the same trouble. On the eth1 , it is not detecting.Even when I use the slackware install CD , it is not detecting the card in the supplemental network disk.
Thanks

hii guys, i do have the same card,,, and the same problem did anyone of u find any answer,,,, some one told me that we shud buy the card which is supported by the kernel
,, so did anyone write the drivers

From what I understand, this seems to be a problematic card for any recent Linux flavour....
http://support.zenwalk.org/index.php....html#msg17856