U-Boot 2022.01-meson-sm1 (Jan 29 2022 - 13:03:05 +0200) x96-max-plus

Model: AMedia X96 Max+
SoC:   Amlogic Meson SM1 (Unknown) Revision 2b:b (1:2)
DRAM:  3.8 GiB
MMC:   sd@ffe03000: 0, sd@ffe05000: 1, mmc@ffe07000: 2
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
Board variant: c4
Net:   eth0: ethernet@ff3f0000
Hit any key to stop autoboot:  0 
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
5655 bytes read in 11 ms (502 KiB/s)
## Executing script at 08000000
123 bytes read in 11 ms (10.7 KiB/s)
## Error: Can't overwrite "ethaddr"
himport_r: can't insert "ethaddr=00:50:43:84:fb:2f" into hash table
Legacy bootargs: root=/dev/mmcblk1p2 ro rootwait rootfstype=ext4 init=/sbin/init console=ttyS0,115200 console=tty1 consoleblank=0 coherent_pool=2M loglevel=4  no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=1080p60hz cvbsmode=576cvbs max_freq_a55=1908 maxcpus=4 voutmode=hdmi  disablehpd=false cvbscable= overscan=100  monitor_onoff=false  sdrmode=auto
28041728 bytes read in 1241 ms (21.5 MiB/s)
72419 bytes read in 25 ms (2.8 MiB/s)
8601436 bytes read in 387 ms (21.2 MiB/s)
Moving Image from 0x1b00000 to 0x1c00000, end=37b0000
## Loading init Ramdisk from Legacy Image at 04080000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    8601372 Bytes = 8.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x1000000
   Loading Ramdisk to 3f7cc000, end 3fffff1c ... OK
   Loading Device Tree to 000000003f7b7000, end 000000003f7cbae2 ... OK

Starting kernel ...



=======================================================================

if you want to transfer the system to SDcard to internal memory (eMMC or NAND),
follow transfer-to-disk

=======================================================================

slarm64 GNU/Linux (ttyAML0)
Kernel 5.10.94 (aarch64)

x96-max-plus login:

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.94 (root@firefly-rk3399) (gcc (GCC) 11.2.0, GNU ld version 2.37-slack15) #1 SMP PREEMPT Sat Jan 29 13:06:36 EET 2022
[    0.000000] Machine model: AMedia X96 Max+
[    0.000000] efi: UEFI not found.
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@5000000': base 0x0000000005000000, size 3 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000bcc00000, size 896 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000f4e5afff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x00000000f4e5afff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4e5afff]
[    0.000000] On node 0 totalpages: 1003099
[    0.000000]   DMA zone: 15674 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 1003099 pages, LIFO batch:63
[    0.000000] On node 0, zone DMA: 421 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 22 pages/cpu s51032 r8192 d30888 u90112
[    0.000000] pcpu-alloc: s51032 r8192 d30888 u90112 alloc=22*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: patching kernel code
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 987425
[    0.000000] Kernel command line: root=/dev/mmcblk1p2 ro rootwait rootfstype=ext4 init=/sbin/init console=ttyAML0,115200n8 console=tty1 consoleblank=0 coherent_pool=2M loglevel=4 usb-storage.quirks=  
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 2982556K/4012396K available (14656K kernel code, 2616K rwdata, 5624K rodata, 4352K init, 959K bss, 112336K reserved, 917504K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x28/0x480 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000193] Console: colour dummy device 80x25
[    0.000220] printk: console [tty1] enabled
[    0.000255] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.000268] pid_max: default: 32768 minimum: 301
[    0.000409] LSM: Security Framework initializing
[    0.000465] SELinux:  Initializing.
[    0.000609] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000626] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002426] rcu: Hierarchical SRCU implementation.
[    0.003602] EFI services will not be available.
[    0.003956] smp: Bringing up secondary CPUs ...
[    0.004797] Detected VIPT I-cache on CPU1
[    0.004863] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.005772] Detected VIPT I-cache on CPU2
[    0.005816] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.006677] Detected VIPT I-cache on CPU3
[    0.006716] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.006804] smp: Brought up 1 node, 4 CPUs
[    0.006814] SMP: Total of 4 processors activated.
[    0.006820] CPU features: detected: Privileged Access Never
[    0.006828] CPU features: detected: User Access Override
[    0.006834] CPU features: detected: 32-bit EL0 Support
[    0.006839] CPU features: detected: Common not Private translations
[    0.006846] CPU features: detected: RAS Extension Support
[    0.006853] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.006860] CPU features: detected: CRC32 instructions
[    0.006867] CPU features: detected: 32-bit EL1 Support
[    0.007916] CPU: All CPU(s) started at EL2
[    0.010177] devtmpfs: initialized
[    0.024196] Registered cp15_barrier emulation handler
[    0.024214] Registered setend emulation handler
[    0.024355] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.024373] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.044875] prandom: seed boundary self test passed
[    0.046366] prandom: 100 self tests passed
[    0.070186] prandom32: self test passed (less than 6 bits correlated)
[    0.070232] pinctrl core: initialized pinctrl subsystem
[    0.070940] DMI not present or invalid.
[    0.071201] NET: Registered protocol family 16
[    0.072926] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.073259] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.074029] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.074151] audit: initializing netlink subsys (disabled)
[    0.074355] audit: type=2000 audit(0.073:1): state=initialized audit_enabled=0 res=1
[    0.075734] thermal_sys: Registered thermal governor 'step_wise'
[    0.076286] cpuidle: using governor ladder
[    0.076429] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.076547] ASID allocator initialised with 65536 entries
[    0.076658] Serial: AMBA PL011 UART driver
[    0.117520] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.117533] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.117540] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.117547] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.550761] cryptd: max_cpu_qlen set to 1000
[    1.554460] "cryptomgr_test" (93) uses obsolete ecb(arc4) skcipher
[    1.565844] alg: No test for 842 (842-generic)
[    1.565955] alg: No test for 842 (842-scomp)
[    1.660331] DRBG: Continuing without Jitter RNG
[    1.729408] raid6: neonx8   gen()  2077 MB/s
[    1.786153] raid6: neonx8   xor()  1593 MB/s
[    1.842928] raid6: neonx4   gen()  2133 MB/s
[    1.899670] raid6: neonx4   xor()  1578 MB/s
[    1.956447] raid6: neonx2   gen()  2007 MB/s
[    2.013190] raid6: neonx2   xor()  1449 MB/s
[    2.069971] raid6: neonx1   gen()  1682 MB/s
[    2.126710] raid6: neonx1   xor()  1165 MB/s
[    2.183488] raid6: int64x8  gen()  1351 MB/s
[    2.240235] raid6: int64x8  xor()   764 MB/s
[    2.297004] raid6: int64x4  gen()  1586 MB/s
[    2.353753] raid6: int64x4  xor()   845 MB/s
[    2.410539] raid6: int64x2  gen()  1436 MB/s
[    2.467245] raid6: int64x2  xor()   730 MB/s
[    2.523977] raid6: int64x1  gen()  1093 MB/s
[    2.580708] raid6: int64x1  xor()   493 MB/s
[    2.580716] raid6: using algorithm neonx4 gen() 2133 MB/s
[    2.580721] raid6: .... xor() 1578 MB/s, rmw enabled
[    2.580728] raid6: using neon recovery algorithm
[    2.581920] reg-fixed-voltage regulator-ao_5v: Failed to register regulator: -517
[    2.581966] fbcon: Taking over console
[    2.582465] reg-fixed-voltage regulator-emmc_1v8: Failed to register regulator: -517
[    2.582595] VDDAO_3V3: supplied by DC_IN
[    2.583166] VDDIO_AO1V8: supplied by VDDAO_3V3
[    2.583603] reg-fixed-voltage regulator-vddgpu: Failed to register regulator: -517
[    2.583899] iommu: Default domain type: Translated 
[    2.584225] vgaarb: loaded
[    2.584662] SCSI subsystem initialized
[    2.584921] usbcore: registered new interface driver usbfs
[    2.584965] usbcore: registered new interface driver hub
[    2.585008] usbcore: registered new device driver usb
[    2.585488] mc: Linux media interface: v0.10
[    2.585523] videodev: Linux video capture interface: v2.00
[    2.585799] EDAC MC: Ver: 3.0.0
[    2.586875] Advanced Linux Sound Architecture Driver Initialized.
[    2.587970] clocksource: Switched to clocksource arch_sys_counter
[    2.588284] VFS: Disk quotas dquot_6.6.0
[    2.588349] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.588474] FS-Cache: Loaded
[    2.597175] NET: Registered protocol family 2
[    2.597376] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.599274] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    2.599313] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    2.599538] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    2.599905] TCP: Hash tables configured (established 32768 bind 32768)
[    2.600126] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    2.600205] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    2.600263] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    2.600442] NET: Registered protocol family 1
[    2.601088] RPC: Registered named UNIX socket transport module.
[    2.601096] RPC: Registered udp transport module.
[    2.601103] RPC: Registered tcp transport module.
[    2.601107] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.601117] NET: Registered protocol family 44
[    2.601136] PCI: CLS 0 bytes, default 64
[    2.601390] Trying to unpack rootfs image as initramfs...
[    2.946616] Freeing initrd memory: 8396K
[    2.947398] kvm [1]: IPA Size Limit: 40 bits
[    2.947540] kvm [1]: vgic interrupt IRQ9
[    2.947693] kvm [1]: VHE mode initialized successfully
[    3.135065] Initialise system trusted keyrings
[    3.135259] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    3.142120] zbud: loaded
[    3.144093] FS-Cache: Netfs 'nfs' registered for caching
[    3.144700] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.145695] fuse: init (API version 7.32)
[    3.146220] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    3.185674] NET: Registered protocol family 38
[    3.236625] xor: measuring software checksum speed
[    3.240935]    8regs           :  2305 MB/sec
[    3.244454]    32regs          :  2810 MB/sec
[    3.248828]    arm64_neon      :  2260 MB/sec
[    3.248834] xor: using function: 32regs (2810 MB/sec)
[    3.248849] Key type asymmetric registered
[    3.248856] Asymmetric key parser 'x509' registered
[    3.248906] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    3.249042] io scheduler mq-deadline registered
[    3.249050] io scheduler kyber registered
[    3.249206] io scheduler bfq registered
[    3.315538] soc soc0: Amlogic Meson SM1 (Unknown) Revision 2b:b (1:2) Detected
[    3.317584] VDDCPU: supplied by regulator-dummy
[    3.319302] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[    3.321165] Serial: AMBA driver
[    3.321578] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart
[    3.338725] printk: console [ttyAML0] enabled
[    3.339664] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 28, base_baud = 1500000) is a meson_uart
[    3.339827] serial serial0: tty port ttyAML6 registered
[    3.349824] brd: module loaded
[    3.484678] loop: module loaded
[    3.492648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.492673] ehci-pci: EHCI PCI platform driver
[    3.492741] ehci-platform: EHCI generic platform driver
[    3.493273] usbcore: registered new interface driver cdc_wdm
[    3.493328] usbcore: registered new interface driver usb-storage
[    3.493815] mousedev: PS/2 mouse device common for all mice
[    3.495508] meson-vrtc ff8000a8.rtc: registered as rtc0
[    3.495542] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3)
[    3.495969] i2c /dev entries driver
[    3.498106] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
[    3.500133] meson-ao-cec-g12a ff800280.cec: ao-sysctrl syscon regmap lookup failed.
[    3.500494] Registered IR keymap rc-cec
[    3.500614] rc rc0: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc0
[    3.500783] input: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc0/input0
[    3.509434] Synopsys Designware Multimedia Card Interface Driver
[    3.510850] meson-gx-mmc ffe05000.sd: Got CD GPIO
[    3.510940] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
[    3.511797] meson-sm: secure-monitor enabled
[    3.513879] hid: raw HID events driver (C) Jiri Kosina
[    3.514017] usbcore: registered new interface driver usbhid
[    3.514023] usbhid: USB HID core driver
[    3.521929] Initializing XFRM netlink socket
[    3.522523] NET: Registered protocol family 10
[    3.548163] Segment Routing with IPv6
[    3.548171] RPL Segment Routing with IPv6
[    3.548376] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.550626] bpfilter: Loaded bpfilter_umh pid 317
[    3.551175] NET: Registered protocol family 17
[    3.551208] NET: Registered protocol family 15
[    3.551383] 8021q: 802.1Q VLAN Support v1.8
[    3.551688] registered taskstats version 1
[    3.551696] Loading compiled-in X.509 certificates
[    3.553498] zswap: loaded using pool zstd/zbud
[    3.553825] Key type ._fscrypt registered
[    3.553830] Key type .fscrypt registered
[    3.553835] Key type fscrypt-provisioning registered
[    3.554658] Btrfs loaded, crc32c=crc32c-generic
[    3.575525] AO_5V: supplied by DC_IN
[    3.575857] EMMC_1V8: supplied by VDDAO_3V3
[    3.576156] mali: supplied by AO_5V
[    3.578104] mmc1: new high speed SDHC card at address 0001
[    3.578633] mmcblk1: mmc1:0001 EB1QT 29.8 GiB 
[    3.579658] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
[    3.580443]  mmcblk1: p1 p2
[    3.589466] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
[    3.593741] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
[    3.594597] mmc0: queuing unknown CIS tuple 0x14 (0 bytes)
[    3.597811] mmc0: queuing unknown CIS tuple 0x80 (1 bytes)
[    3.597844] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
[    3.597878] mmc0: queuing unknown CIS tuple 0x82 (1 bytes)
[    3.597903] mmc0: new ultra high speed SDR50 SDIO card at address 0001
[    3.661052] meson-drm ff900000.vpu: Queued 3 outputs on vpu
[    3.688011] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    3.688361] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    3.689104] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
[    3.689590] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[    3.690355] [drm] kms: can't enable cloning when we probably wanted to.
[    3.853443] Console: switching to colour frame buffer device 128x48
[    3.881592] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
[    3.885447] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[    3.885462] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[    3.885674] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[    3.885689] meson8b-dwmac ff3f0000.ethernet: no reset control found
[    3.886936] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    3.886951] meson8b-dwmac ff3f0000.ethernet: 	DWMAC1000
[    3.886962] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[    3.886973] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[    3.886982] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[    3.886990] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[    3.886998] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[    3.887007] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[    3.887016] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[    3.887023] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.890083] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[    3.890095] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[    3.893687] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[    3.893819] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[    3.894263] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    3.896024] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    3.896300] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1
[    3.896440] xhci-hcd xhci-hcd.4.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[    3.896504] xhci-hcd xhci-hcd.4.auto: irq 37, io mem 0xff500000
[    3.896924] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.896933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.896940] usb usb1: Product: xHCI Host Controller
[    3.896945] usb usb1: Manufacturer: Linux 5.10.94 xhci-hcd
[    3.896949] usb usb1: SerialNumber: xhci-hcd.4.auto
[    3.897510] hub 1-0:1.0: USB hub found
[    3.897547] hub 1-0:1.0: 2 ports detected
[    3.897937] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    3.898202] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
[    3.898218] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[    3.898286] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.898402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    3.898412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.898417] usb usb2: Product: xHCI Host Controller
[    3.898425] usb usb2: Manufacturer: Linux 5.10.94 xhci-hcd
[    3.898430] usb usb2: SerialNumber: xhci-hcd.4.auto
[    3.898882] hub 2-0:1.0: USB hub found
[    3.898917] hub 2-0:1.0: 1 port detected
[    3.900780] simple-framebuffer f4e5b000.framebuffer: framebuffer at 0xf4e5b000, 0x195000 bytes, mapped to 0x(____ptrval____)
[    3.900791] simple-framebuffer f4e5b000.framebuffer: format=x8r8g8b8, mode=720x576x32, linelength=2880
[    3.901080] simple-framebuffer f4e5b000.framebuffer: fb1: simplefb registered!
[    3.902166] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[    4.045555] mmc2: new HS200 MMC card at address 0001
[    4.047249] mmcblk2: mmc2:0001 HCG4a2 58.2 GiB 
[    4.047519] mmcblk2boot0: mmc2:0001 HCG4a2 partition 1 4.00 MiB
[    4.047793] mmcblk2boot1: mmc2:0001 HCG4a2 partition 2 4.00 MiB
[    4.047984] mmcblk2rpmb: mmc2:0001 HCG4a2 partition 3 4.00 MiB, chardev (242:0)
[    4.117172] ALSA device list:
[    4.117183]   No soundcards found.
[    4.118885] Freeing unused kernel memory: 4352K
[    4.134852] Run /init as init process
[    4.134865]   with arguments:
[    4.134875]     /init
[    4.134883]   with environment:
[    4.134891]     HOME=/
[    4.134898]     TERM=linux
[    4.151354] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    4.225828] random: udevd: uninitialized urandom read (16 bytes read)
[    4.226052] random: udevd: uninitialized urandom read (16 bytes read)
[    4.226093] random: udevd: uninitialized urandom read (16 bytes read)
[    4.239226] udevd[363]: starting eudev-3.2.11
[    4.276674] random: fast init done
[    4.295780] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37
[    4.295791] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.295796] usb 1-1: Product: USB2.0 Hub
[    4.346702] hub 1-1:1.0: USB hub found
[    4.346970] hub 1-1:1.0: 4 ports detected
[    4.545455] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    4.634670] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd
[    4.728562] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    4.728575] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.728587] usb 1-1.1: Product: USB Optical Mouse
[    4.728597] usb 1-1.1: Manufacturer: Logitech
[    4.765191] input: Logitech USB Optical Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.4.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C077.0001/input/input1
[    4.765793] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-xhci-hcd.4.auto-1.1/input0
[    4.841347] usb 1-1.4: new low-speed USB device number 4 using xhci-hcd
[    4.936558] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    4.936573] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.936582] usb 1-1.4: Product: USB Keyboard
[    4.936593] usb 1-1.4: Manufacturer: Logitech
[    5.024211] input: Logitech USB Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.4.auto/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C31C.0002/input/input2
[    5.078994] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-xhci-hcd.4.auto-1.4/input0
[    5.085985] input: Logitech USB Keyboard Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.4.auto/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31C.0003/input/input3
[    5.141741] input: Logitech USB Keyboard System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.4.auto/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31C.0003/input/input4
[    5.142148] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-xhci-hcd.4.auto-1.4/input1
[    6.579734] urandom_read: 4 callbacks suppressed
[    6.579742] random: vgchange: uninitialized urandom read (4 bytes read)
[    6.737556] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[    8.334081] random: udevd: uninitialized urandom read (16 bytes read)
[    8.336215] random: udevd: uninitialized urandom read (16 bytes read)
[    8.452244] udevd[580]: starting eudev-3.2.11
[    8.807652] Registered IR keymap rc-x96max
[    8.824469] Registered IR keymap rc-cec
[    8.824575] rc rc2: dw_hdmi as /devices/platform/soc/ff600000.bus/ff600000.hdmi-tx/rc/rc2
[    8.824735] input: dw_hdmi as /devices/platform/soc/ff600000.bus/ff600000.hdmi-tx/rc/rc2/input6
[    8.852356] IR NEC protocol handler initialized
[    8.881423] rc rc1: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc1
[    8.881561] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[    8.881677] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc1/input5
[    8.881949] meson-ir ff808000.ir: receiver initialized
[    9.042989] panfrost ffe40000.gpu: clock rate = 24000000
[    9.044145] panfrost ffe40000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
[    9.044154] panfrost ffe40000.gpu: features: 00000000,3fde77ff, issues: 00000000,00000400
[    9.044158] panfrost ffe40000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[    9.044162] panfrost ffe40000.gpu: shader_present=0x1 l2_present=0x1
[    9.053774] [drm] Initialized panfrost 1.1.0 20180908 for ffe40000.gpu on minor 1
[    9.135386] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    9.509692] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.597386] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.282953] ath10k_sdio mmc0:0001:1: qca6174 hw3.2 sdio target 0x05030000 chip_id 0x00000000 sub 0000:0000
[   10.282964] ath10k_sdio mmc0:0001:1: kconfig debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
[   10.283112] ath10k_sdio mmc0:0001:1: firmware ver WLAN.RMH.4.4.1-00077 api 6 features wowlan,ignore-otp crc32 a48b7c2f
[   10.493168] ath10k_sdio mmc0:0001:1: failed to fetch board data for bus=sdio,vendor=0271,device=050a,subsystem-vendor=0000,subsystem-device=0000 from ath10k/QCA6174/hw3.0/board-2.bin
[   10.505819] ath10k_sdio mmc0:0001:1: board_file api 1 bmi_id N/A crc32 ed5f849a
[   10.811741] meson-gx-mmc ffe03000.sd: unaligned sg offset 3148, disabling descriptor DMA for transfer
[   10.851456] ath10k_sdio mmc0:0001:1: htt-ver 3.86 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   10.926273] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
[   10.936264] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
[   10.940613] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
[   10.941492] mmc0: queuing unknown CIS tuple 0x14 (0 bytes)
[   10.944796] ath: EEPROM regdomain: 0x6c
[   10.944801] ath: EEPROM indicates we should expect a direct regpair map
[   10.944807] ath: Country alpha2 being used: 00
[   10.944810] ath: Regpair used: 0x6c
[   20.796144] EXT4-fs (mmcblk1p2): Remounting file system with no journal so ignoring journalled data option
[   20.798478] EXT4-fs (mmcblk1p2): re-mounted. Opts: data=writeback,errors=remount-ro
[   21.764690] Adding 131068k swap on /swap.  Priority:5 extents:3 across:5513212k SSFS