LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 05-21-2019, 09:25 AM   #1
powellga
LQ Newbie
 
Registered: Apr 2019
Location: Arizona
Distribution: PCLINUXOS
Posts: 14

Rep: Reputation: Disabled
Exclamation error - Cannot find TOCBLOCK, database may be corrupt


I've never seen this error before..... It comes up at the top of the screen like this during boot:

ldm_parse_tockblock(): Cannot find TOCBLOCK, database may be corrupt
ldm_parse_tockblock(): Cannot find TOCBLOCK, database may be corrupt


This occurs right after I select the kernel boot entry in grub2, and it only occurs with kernels 5.x (5.0.7) and higher - Does not do this with 4.x kernels.

Computer boots fine after this, and I do not notice anything wrong. The error only shows on the screen for about 1 second.

I found this info on TOCBLOCK....

https://flatcap.org/linux-ntfs/ldm/t.../tocblock.html


What kind of issue is this? Is there something I can do to correct this? Why does it only occur on Kernels > 5.x?


I'm running PCLINUXOS distro with all current 2019 package updates, and KDE Plasma 5.

[gregg@localhost ~]$ inxi
CPU: 6-Core Intel Core i7 X 980 (-MT MCP-) speed: 1997 MHz Kernel: 5.1.3-pclos1 x86_64 Up: 36m Mem: 2398.2/11979.6 MiB (20.0%)
Storage: 4.33 TiB (46.2% used) Procs: 318 Shell: bash 4.4.23 inxi: 3.0.33



Thanks.
Gregg


here is the <partial truncated> dmesg log - you can find the tockblock error below at 0.755468: >>>>>>>>



[gregg@localhost ~]$ dmesg
[ 0.000000] Linux version 5.1.3-pclos1 (tex@localhost.localdomain) (gcc version 8.3.1 20190419 (PCLinuxOS 8.3.1-0.5pclos2019)) #1 SMP Thu May 16 19:21:57 CDT 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.1.3-pclos1 root=UUID=77b30994-34d8-413c-b4c5-07b68fe16cf7 ro splash quiet noiswmd nokmsboot resume=UUID=7779ea7f-7bd9-45be-a9ae-a0e8c89379b0 audit=0 vga=788
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf49cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf49d000-0x00000000cf4befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf4bf000-0x00000000cf64cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf64d000-0x00000000cf7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf7bf000-0x00000000cf7dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf7db000-0x00000000cf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fcffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: /DX58SO, BIOS SOX5810J.86A.5600.2013.0729.2250 07/29/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3452.725 MHz processor
[ 0.001129] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001130] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001135] last_pfn = 0x330000 max_arch_pfn = 0x400000000
[ 0.001137] MTRR default type: uncachable
[ 0.001137] MTRR fixed ranges enabled:
[ 0.001138] 00000-9FFFF write-back
[ 0.001138] A0000-BFFFF uncachable
[ 0.001139] C0000-DFFFF write-protect
[ 0.001139] E0000-FFFFF uncachable
[ 0.001139] MTRR variable ranges enabled:
[ 0.001140] 0 base 000000000 mask F80000000 write-back
[ 0.001141] 1 base 080000000 mask FC0000000 write-back
[ 0.001141] 2 base 0C0000000 mask FF0000000 write-back
[ 0.001142] 3 base 100000000 mask F00000000 write-back
[ 0.001142] 4 base 200000000 mask F00000000 write-back
[ 0.001143] 5 base 300000000 mask FE0000000 write-back
[ 0.001143] 6 base 320000000 mask FF0000000 write-back
[ 0.001144] 7 base 0FFFF0000 mask FFFFF0000 write-protect
[ 0.001144] 8 disabled
[ 0.001145] 9 disabled
[ 0.002223] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002285] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.008425] Using GB pages for direct mapping
[ 0.008427] BRK [0x268401000, 0x268401fff] PGTABLE
[ 0.008428] BRK [0x268402000, 0x268402fff] PGTABLE
[ 0.008429] BRK [0x268403000, 0x268403fff] PGTABLE
[ 0.008450] BRK [0x268404000, 0x268404fff] PGTABLE
[ 0.008452] BRK [0x268405000, 0x268405fff] PGTABLE
[ 0.008531] BRK [0x268406000, 0x268406fff] PGTABLE
[ 0.008558] BRK [0x268407000, 0x268407fff] PGTABLE
[ 0.008594] BRK [0x268408000, 0x268408fff] PGTABLE
[ 0.008710] RAMDISK: [mem 0x374c1000-0x37a57fff]
[ 0.008714] ACPI: Early table checksum verification disabled
[ 0.009193] ACPI: Local APIC address 0xfee00000
[ 0.009209] Zone ranges:
[ 0.009209] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.009210] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.009211] Normal [mem 0x0000000100000000-0x000000032fffffff]
[ 0.009211] Movable zone start for each node
[ 0.009212] Early memory node ranges
[ 0.009212] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.009213] node 0: [mem 0x0000000000090000-0x000000000009cfff]
[ 0.009213] node 0: [mem 0x0000000000100000-0x00000000cf49cfff]
[ 0.009213] node 0: [mem 0x00000000cf4bf000-0x00000000cf64cfff]
[ 0.009214] node 0: [mem 0x00000000cf7bf000-0x00000000cf7dafff]
[ 0.009214] node 0: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
[ 0.009215] node 0: [mem 0x0000000100000000-0x000000032fffffff]
[ 0.009254] Zeroed struct page in unavailable ranges: 2589 pages
[ 0.009255] Initmem setup node 0 [mem 0x0000000000001000-0x000000032fffffff]
[ 0.009256] On node 0 totalpages: 3143139
[ 0.009256] DMA zone: 64 pages used for memmap
[ 0.009257] DMA zone: 21 pages reserved
[ 0.009257] DMA zone: 3995 pages, LIFO batch:0
[ 0.009324] DMA32 zone: 13210 pages used for memmap
[ 0.009325] DMA32 zone: 845384 pages, LIFO batch:63
[ 0.023793] Normal zone: 35840 pages used for memmap
[ 0.023795] Normal zone: 2293760 pages, LIFO batch:63
[ 0.060562] ACPI: PM-Timer IO Port: 0x408
[ 0.060564] ACPI: Local APIC address 0xfee00000
[ 0.060570] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.060570] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.060571] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.060571] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.060571] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.060572] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.060572] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.060572] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.060573] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.060573] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.060574] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.060574] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.060574] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.060575] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.060575] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.060576] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.060584] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.060586] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.060587] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.060587] ACPI: IRQ0 used by override.
[ 0.060588] ACPI: IRQ9 used by override.
[ 0.060589] Using ACPI (MADT) for SMP configuration information
[ 0.060590] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.060594] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[ 0.060606] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.060607] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.060608] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.060608] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.060608] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.060609] PM: Registered nosave memory: [mem 0xcf49d000-0xcf4befff]
[ 0.060610] PM: Registered nosave memory: [mem 0xcf64d000-0xcf7befff]
[ 0.060611] PM: Registered nosave memory: [mem 0xcf7db000-0xcf7fefff]
[ 0.060612] PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
[ 0.060613] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[ 0.060613] PM: Registered nosave memory: [mem 0xf8000000-0xfcffffff]
[ 0.060613] PM: Registered nosave memory: [mem 0xfd000000-0xffdfffff]
[ 0.060614] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.060615] [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.060617] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns
[ 0.060626] random: get_random_bytes called from start_kernel+0x90/0x42a with crng_init=0
[ 0.060631] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.061134] percpu: Embedded 42 pages/cpu s134360 r8192 d29480 u262144
[ 0.061139] pcpu-alloc: s134360 r8192 d29480 u262144 alloc=1*2097152
[ 0.061139] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.061156] Built 1 zonelists, mobility grouping on. Total pages: 3094004
[ 0.061157] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.3-pclos1 root=UUID=77b30994-34d8-413c-b4c5-07b68fe16cf7 ro splash quiet noiswmd nokmsboot resume=UUID=7779ea7f-7bd9-45be-a9ae-a0e8c89379b0 audit=0 vga=788
[ 0.061230] audit: disabled (until reboot)
[ 0.062559] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.063215] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.109316] Memory: 12256344K/12572556K available (10244K kernel code, 556K rwdata, 2068K rodata, 1012K init, 2428K bss, 316212K reserved, 0K cma-reserved)
[ 0.109382] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.109386] Kernel/User page tables isolation: enabled
[ 0.109463] rcu: Hierarchical RCU implementation.
[ 0.109465] rcu: RCU calculated value of scheduler-enlistment delay is 50 jiffies.
[ 0.109477] NR_IRQS: 4352, nr_irqs: 552, preallocated irqs: 16
[ 0.109795] Console: colour dummy device 80x25
[ 0.109799] printk: console [tty0] enabled
[ 0.109806] ACPI: Core revision 20190215
[ 0.109972] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.109980] hpet clockevent registered
[ 0.109984] APIC: Switch to symmetric I/O mode setup
[ 0.109985] DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
[ 0.109987] Switched APIC routing to physical flat.
[ 0.110459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.119984] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x31c4de332a6, max_idle_ns: 440795299461 ns
[ 0.119993] Calibrating delay loop (skipped), value calculated using timer frequency.. 6905.45 BogoMIPS (lpj=6905450)
[ 0.119995] pid_max: default: 32768 minimum: 301
[ 0.120013] LSM: Security Framework initializing
[ 0.120057] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.120091] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.120197] *** VALIDATE proc ***
[ 0.120235] *** VALIDATE cgroup1 ***
[ 0.120236] *** VALIDATE cgroup2 ***
[ 0.120257] mce: CPU supports 9 MCE banks
[ 0.120263] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.120269] process: using mwait in idle threads
[ 0.120271] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.120271] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.120273] Spectre V2 : Mitigation: Full generic retpoline
[ 0.120273] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.120274] Speculative Store Bypass: Vulnerable
[ 0.120295] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.120414] Freeing SMP alternatives memory: 32K
[ 0.121985] smpboot: CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz (family: 0x6, model: 0x2c, stepping: 0x2)
[ 0.121985] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.121985] core: CPUID marked event: 'bus cycles' unavailable
[ 0.121985] ... version: 3
[ 0.121985] ... bit width: 48
[ 0.121985] ... generic registers: 4
[ 0.121985] ... value mask: 0000ffffffffffff
[ 0.121985] ... max period: 000000007fffffff
[ 0.121985] ... fixed-purpose events: 3
[ 0.121985] ... event mask: 000000070000000f
[ 0.121985] rcu: Hierarchical SRCU implementation.
[ 0.121985] smp: Bringing up secondary CPUs ...
[ 0.121985] x86: Booting SMP configuration:
[ 0.121985] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
[ 0.136087] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/late...-vuln/mds.html for more details.
[ 0.136087] #7 #8 #9 #10 #11
[ 0.148009] smp: Brought up 1 node, 12 CPUs
[ 0.148009] smpboot: Max logical packages: 2
[ 0.148009] smpboot: Total of 12 processors activated (82865.40 BogoMIPS)
[ 0.150324] devtmpfs: initialized
[ 0.150324] PM: Registering ACPI NVS region [mem 0xcf64d000-0xcf7befff] (1515520 bytes)
[ 0.150324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
[ 0.150324] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.150324] pinctrl core: initialized pinctrl subsystem
[ 0.150324] NET: Registered protocol family 16
[ 0.150355] cpuidle: using governor ladder
[ 0.150355] cpuidle: using governor menu
[ 0.150355] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.150355] ACPI: bus type PCI registered
[ 0.150355] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.150355] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.150355] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.150355] PCI: Using configuration type 1 for base access
[ 0.150355] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.150355] mtrr: probably your BIOS does not setup all CPUs.
[ 0.150355] mtrr: corrected configuration.
[ 0.152014] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.152014] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.152049] ACPI: Added _OSI(Module Device)
[ 0.152049] ACPI: Added _OSI(Processor Device)
[ 0.152050] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152051] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.152052] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.152052] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.152053] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.164253] ACPI: Interpreter enabled


[ 0.202137] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.202156] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.202290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.202403] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.202436] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.202469] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.202545] NET: Registered protocol family 1
[ 0.217356] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x61e took 13238 usecs
[ 0.233353] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x61e took 14445 usecs
[ 0.233371] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.233407] PCI: CLS 64 bytes, default 64
[ 0.233468] Trying to unpack rootfs image as initramfs...
[ 0.283602] Freeing initrd memory: 5724K
[ 0.283621] DMAR: Host address width 39
[ 0.283622] DMAR: DRHD base: 0x000000fe711000 flags: 0x0
[ 0.283634] DMAR: dmar0: reg_base_addr fe711000 ver 1:0 cap c9008010e60262 ecap f0207a
[ 0.283635] DMAR: DRHD base: 0x000000fe710000 flags: 0x1
[ 0.283640] DMAR: dmar1: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f0207a
[ 0.283641] DMAR: RMRR base: 0x000000cf4ab000 end: 0x000000cf4abfff
[ 0.283641] DMAR: RMRR base: 0x000000cf4af000 end: 0x000000cf4affff
[ 0.283642] DMAR: RMRR base: 0x000000cf4b0000 end: 0x000000cf4b0fff
[ 0.283643] DMAR: RMRR base: 0x000000cf4a2000 end: 0x000000cf4a2fff
[ 0.283643] DMAR: RMRR base: 0x000000cf4a5000 end: 0x000000cf4a5fff
[ 0.283644] DMAR: RMRR base: 0x000000cf4a8000 end: 0x000000cf4a8fff
[ 0.283644] DMAR: RMRR base: 0x000000cf4aa000 end: 0x000000cf4aafff
[ 0.283645] DMAR: RMRR base: 0x000000cf4a1000 end: 0x000000cf4a1fff
[ 0.283646] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000eefff
[ 0.293159] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.293160] software IO TLB: mapped [mem 0xcb49d000-0xcf49d000] (64MB)
[ 0.294150] Initialise system trusted keyrings
[ 0.294188] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 0.295198] zbud: loaded
[ 0.307082] Key type asymmetric registered
[ 0.307083] Asymmetric key parser 'x509' registered
[ 0.307089] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.307120] io scheduler mq-deadline registered
[ 0.307120] io scheduler kyber registered
[ 0.307140] io scheduler bfq registered
[ 0.307533] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[ 0.307813] pcieport 0000:00:03.0: Signaling PME with IRQ 25
[ 0.308094] pcieport 0000:00:07.0: Signaling PME with IRQ 26
[ 0.308374] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[ 0.308656] pcieport 0000:00:1c.1: Signaling PME with IRQ 28
[ 0.308935] pcieport 0000:00:1c.4: Signaling PME with IRQ 29
[ 0.309022] vesafb: mode is 800x600x16, linelength=1600, pages=0
[ 0.309023] vesafb: scrolling: redraw
[ 0.309024] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.309029] vesafb: framebuffer at 0xf1000000, mapped to 0x(____ptrval____), using 960k, total 960k
[ 0.309091] Console: switching to colour frame buffer device 100x37
[ 0.335743] fb0: VESA VGA frame buffer device
[ 0.335753] intel_idle: MWAIT substates: 0x1120
[ 0.335754] intel_idle: v0.4.1 model 0x2C
[ 0.336069] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.336131] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.336144] ACPI: Sleep Button [SLPB]
[ 0.336173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.336179] ACPI: Power Button [PWRF]
[ 0.339473] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.339755] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
[ 0.340525] Non-volatile memory driver v1.3
[ 0.340557] Linux agpgart interface v0.103
[ 0.343621] brd: module loaded
[ 0.343846] ahci 0000:00:1f.2: version 3.0
[ 0.344130] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.344132] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 0.373716] scsi host0: ahci
[ 0.374203] scsi host1: ahci
[ 0.374668] scsi host2: ahci
[ 0.374995] scsi host3: ahci
[ 0.375358] scsi host4: ahci
[ 0.375639] scsi host5: ahci
[ 0.375687] ata1: SATA max UDMA/133 abar m2048@0xd1220000 port 0xd1220100 irq 30
[ 0.375689] ata2: SATA max UDMA/133 abar m2048@0xd1220000 port 0xd1220180 irq 30
[ 0.375690] ata3: SATA max UDMA/133 abar m2048@0xd1220000 port 0xd1220200 irq 30
[ 0.375691] ata4: SATA max UDMA/133 abar m2048@0xd1220000 port 0xd1220280 irq 30
[ 0.375692] ata5: SATA max UDMA/133 abar m2048@0xd1220000 port 0xd1220300 irq 30
[ 0.375693] ata6: SATA max UDMA/133 abar m2048@0xd1220000 port 0xd1220380 irq 30
[ 0.375757] libphy: Fixed MDIO Bus: probed
[ 0.375776] i8042: PNP: No PS/2 controller found.
[ 0.375812] mousedev: PS/2 mouse device common for all mice
[ 0.375907] rtc_cmos 00:00: RTC can wake from S4
[ 0.376027] rtc_cmos 00:00: registered as rtc0
[ 0.376038] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.376045] intel_pstate: CPU model not supported
[ 0.376118] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.376289] NET: Registered protocol family 10
[ 0.376476] Segment Routing with IPv6
[ 0.376493] NET: Registered protocol family 17
[ 0.376498] Key type dns_resolver registered
[ 0.376498] mpls_gso: MPLS GSO support
[ 0.377076] microcode: sig=0x206c2, pf=0x2, revision=0x1a
[ 0.377433] microcode: Microcode Update Driver: v2.2.
[ 0.377439] sched_clock: Marking stable (377213938, 215546)->(493056442, -115626958)
[ 0.378918] registered taskstats version 1
[ 0.378918] Loading compiled-in X.509 certificates
[ 0.378933] zswap: loaded using pool lzo/zbud
[ 0.383259] rtc_cmos 00:00: setting system clock to 2019-05-21T06:57:47 UTC (1558421867)
[ 0.690493] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.691077] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.691199] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.691510] ata2.00: ATA-8: KINGSTON SNVP325S2256GB, AGYA0202, max UDMA/100
[ 0.691513] ata2.00: 500118192 sectors, multi 16: LBA48
[ 0.691597] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.691873] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.691905] ata2.00: configured for UDMA/100
[ 0.691948] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.692247] ata1.00: supports DRM functions and may not be fully accessible
[ 0.692457] ata3.00: ATA-8: ST3000DM001-9YN166, CC4H, max UDMA/133
[ 0.692459] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 0.693020] ata3.00: configured for UDMA/133
[ 0.693192] ata1.00: disabling queued TRIM support
[ 0.693194] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
[ 0.693196] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.694269] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24LS70, GL03, max UDMA/100
[ 0.695090] ata1.00: supports DRM functions and may not be fully accessible
[ 0.695812] ata1.00: disabling queued TRIM support
[ 0.697042] ata4.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 0.697045] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 0.697567] ata1.00: configured for UDMA/133
[ 0.697816] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 0.698594] ata5.00: configured for UDMA/100
[ 0.698679] scsi 1:0:0:0: Direct-Access ATA KINGSTON SNVP325 0202 PQ: 0 ANSI: 5
[ 0.698828] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 0.698858] sd 0:0:0:0: [sda] Write Protect is off
[ 0.698860] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.698878] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.699116] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.699133] scsi 2:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4H PQ: 0 ANSI: 5
[ 0.699133] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.699134] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.699156] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.699253] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 0.699254] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 0.699259] sd 2:0:0:0: [sdc] Write Protect is off
[ 0.699260] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.699271] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.699488] sda: sda1 sda2
[ 0.700048] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 0.700142] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.700251] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.703817] ata4.00: configured for UDMA/133
[ 0.704081] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1118 PQ: 0 ANSI: 5
[ 0.704388] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.704404] sd 3:0:0:0: [sdd] Write Protect is off
[ 0.704406] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 0.704471] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.709823] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24LS70 GL03 PQ: 0 ANSI: 5
[ 0.736047] sdd: sdd1
[ 0.736983] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 0.755468] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[ 0.755996] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[ 0.765632] sdc: [LDM] sdc1
[ 0.765988] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 0.766737] Freeing unused kernel image memory: 1012K
[ 0.774395] Write protecting the kernel read-only data: 16384k
[ 0.776434] Freeing unused kernel image memory: 2016K
[ 0.777264] Freeing unused kernel image memory: 2028K
[ 0.777708] rodata_test: all tests were successful
[

Last edited by powellga; 05-21-2019 at 09:50 AM.
 
Old 05-21-2019, 01:52 PM   #2
ondoho
LQ Addict
 
Registered: Dec 2013
Posts: 11,630
Blog Entries: 9

Rep: Reputation: 3079Reputation: 3079Reputation: 3079Reputation: 3079Reputation: 3079Reputation: 3079Reputation: 3079Reputation: 3079Reputation: 3079Reputation: 3079Reputation: 3079
is there a problem with that kernel version, apart from the errors you're seeing?
is that the current version supported by your distro?
 
Old 05-21-2019, 07:24 PM   #3
powellga
LQ Newbie
 
Registered: Apr 2019
Location: Arizona
Distribution: PCLINUXOS
Posts: 14

Original Poster
Rep: Reputation: Disabled
None that I see.

[gregg@localhost ~]$ uname -a
Linux localhost.localdomain 5.1.3-pclos1 #1 SMP Thu May 16 19:21:57 CDT 2019 x86_64 x86_64 x86_64 GNU/Linux

Don't think anyone on the PCLINUXOS forum is aware of what this problem might be - hence my query here. My kernel version is from the distro - load it from the synaptic package manager. The two 5.x versions I've tried.... 5.0.7, and 5.1.3 have the error. But the 4.x versions do not.

r/
Gregg
AZ
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
initrmfs - tocblock not foudn database may be corrupt! A.samim.S Linux - Newbie 1 10-17-2018 07:31 AM
NTOP Error Traversing Database for ipnum = - Perhaps database is corrupt? soslinux Linux - Networking 2 03-03-2010 06:28 AM
Flash Drive Will Not Mount - May Be Corrupt ChristianSean Linux - Newbie 4 12-13-2009 12:00 PM
LDM problem Cannot find TOCBLOCK nLEyETn Linux - Software 2 11-14-2007 02:17 PM
Database Programming (database to database transaction) johncsl82 Programming 7 02-02-2007 08:20 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 08:46 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration