Hi:
Sorry to be late. Since it's not convenient to restart
the machine on SMP kernel. Here is the output of "dmesg"
on no-SMP kernel. Is this okay?
Thanks in advance.
##################################################################
Linux version 2.6.9-42.EL (bhcompile@hs20-bc1-1.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-2)) #1 Wed Jul 12 23:16:43 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000eb2c0 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
BIOS-e820: 00000000bffce000 - 00000000c0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Using x86 segment limits to approximate NX protection
zapping low mappings.
On node 0 totalpages: 1048576
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 819200 pages, LIFO batch:16
DMI present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f9980
ACPI: RSDT (v001 013007 RSDT1729 0x20070130 MSFT 0x00000097) @ 0xbffc0000
ACPI: FADT (v002 013007 FACP1729 0x20070130 MSFT 0x00000097) @ 0xbffc0200
ACPI: MADT (v001 013007 APIC1729 0x20070130 MSFT 0x00000097) @ 0xbffc0390
ACPI: MCFG (v001 013007 OEMMCFG 0x20070130 MSFT 0x00000097) @ 0xbffc0410
ACPI: OEMB (v001 013007 OEMB1729 0x20070130 MSFT 0x00000097) @ 0xbffce040
ACPI: HPET (v001 013007 OEMHPET0 0x20070130 MSFT 0x00000097) @ 0xbffc5a30
ACPI: DSDT (v001 692F1 692F1P17 0x00000000 INTL 0x20051117) @ 0x00000000
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 6:15 APIC version 20
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 6:15 APIC version 20
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
Enabling APIC mode: Flat. Using 0 I/O APICs
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c03ff000 soft=c03fe000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
spurious 8259A interrupt: IRQ7.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3106604k/4194304k available (2150k kernel code, 37896k reserved, 712k data, 164k init, 2227968k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2400.254 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 4803.37 BogoMIPS (lpj=2401687)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 498k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:0f.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 23 (level, low) -> IRQ 169
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 22 (level, low) -> IRQ 177
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:0b.1[B] -> GSI 21 (level, low) -> IRQ 185
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 20 (level, low) -> IRQ 193
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:0e.1[B] -> GSI 23 (level, low) -> IRQ 169
ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:0e.2[C] -> GSI 22 (level, low) -> IRQ 177
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:0f.1[B] -> GSI 21 (level, low) -> IRQ 185
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 20 (level, low) -> IRQ 193
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 169
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 201
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 18 (level, low) -> IRQ 209
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:08:00.0[A] -> GSI 19 (level, low) -> IRQ 201
PCI: Device 00:88 not found by BIOS
PCI: Device 00:90 not found by BIOS
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1193253924.609:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 8301CD821788A86B
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: ASUS DVD-E818A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X DVD-ROM drive, 198kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 131072 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 524288 bind 131072)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
PS2K PS2M UAR1 NSMB USB2 NMAC NMAD P0P1 HDAC BR10 BR11 BR12 BR14 BR15 USB0 BR13 PWRB
Freeing unused kernel memory: 164k freed
SCSI subsystem initialized
libata version 1.20 loaded.
ahci 0000:05:00.0: version 1.2
ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 217
MSI INIT SUCCESS
PCI: Setting latency timer of device 0000:05:00.0 to 64
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xF8820100 ctl 0x0 bmdma 0x0 irq 217
ata1: SATA link down (SStatus 0)
scsi0 : ahci
sata_nv 0000:00:0e.0: version 0.8
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 20 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata2: SATA max UDMA/133 cmd 0xA400 ctl 0xA082 bmdma 0x9880 irq 193
ata3: SATA max UDMA/133 cmd 0xA000 ctl 0x9C02 bmdma 0x9888 irq 193
ata2: SATA link down (SStatus 0)
scsi1 : sata_nv
ata3: SATA link down (SStatus 0)
scsi2 : sata_nv
ACPI: PCI interrupt 0000:00:0e.1[B] -> GSI 23 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:0e.1 to 64
ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9482 bmdma 0x9000 irq 169
ata5: SATA max UDMA/133 cmd 0x9400 ctl 0x9082 bmdma 0x9008 irq 169
ata4: SATA link up 1.5 Gbps (SStatus 113)
ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata4: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
ata4: dev 0 configured for UDMA/133
scsi3 : sata_nv
ata5: SATA link down (SStatus 0)
scsi4 : sata_nv
Vendor: ATA Model: ST3500630AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
ACPI: PCI interrupt 0000:00:0e.2[C] -> GSI 22 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:0e.2 to 64
ata6: SATA max UDMA/133 cmd 0x8C00 ctl 0x8882 bmdma 0x8400 irq 177
ata7: SATA max UDMA/133 cmd 0x8800 ctl 0x8482 bmdma 0x8408 irq 177
ata6: SATA link down (SStatus 0)
scsi5 : sata_nv
ata7: SATA link down (SStatus 0)
scsi6 : sata_nv
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
inserting floppy driver for 2.6.9-42.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.41.
ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 20 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:11.0 to 64
divert: allocating divert_blk for eth0
eth0: forcedeth.c: subsystem: 0105b:0d08 bound to 0000:00:11.0
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:12.0 to 64
divert: allocating divert_blk for eth1
eth1: forcedeth.c: subsystem: 0105b:0d08 bound to 0000:00:12.0
ACPI: PCI interrupt 0000:00:0f.1[B] -> GSI 21 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:0f.1 to 64
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:01:00.0 to 64
PCI: Enabling device 0000:08:00.0 (0000 -> 0003)
ACPI: PCI interrupt 0000:08:00.0[A] -> GSI 19 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:08:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
ACPI: PCI interrupt 0000:00:0b.1[B] -> GSI 21 (level, low) -> IRQ 185
ehci_hcd 0000:00:0b.1: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: irq 185, pci mem f8886c00
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 22 (level, low) -> IRQ 177
ohci_hcd 0000:00:0b.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: irq 177, pci mem f88b8000
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda1, internal journal
device-mapper: 4.5.0-ioctl (2005-10-04) initialised:
dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 8193140k swap on /dev/sda2. Priority:-1 extents:1
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microdata for cpu 0
IA-32 Microcode Update Driver v1.14 unregistered
parport0: PC-style at 0x378 [PCSPP]
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0383d60(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
eth0: no IPv6 routers present
parport0: PC-style at 0x378 [PCSPP]
application python uses obsolete OSS audio interface
parport0: PC-style at 0x378 [PCSPP]
application wine uses obsolete OSS audio interface
application wine_relocated uses obsolete OSS audio interface
application wine uses obsolete OSS audio interface
application wine_relocated uses obsolete OSS audio interface
parport0: PC-style at 0x378 [PCSPP]
nfsd: last server has exited
nfsd: unexporting all filesystems
##################################################################