For fencing, we are using HP iLO and server is BL460c G6. Problem is resource is start moving to the passive when the failed node is power on. It is really strange for me. For example, I shutdown the node1 and physically remove the node1 machine from the blade chassis and monitor the clustat output, clustat was still showing that the resource is on node 1, even node 1 is power down and removed from c7000 blade chassis. But when I plugged again the failed node1 on the c7000 blade chassis and it power-on, then clustat is showing that the resource is start moving to the passive node from the failed node.
We are powering down the blade server with power button in front of it, then we remove it from the chassis, If we face the hardware problem in our active node and the active node goes down then how the resource move to the passive node. In addition, When I rebooted or shutdown the machine from the CLI, then the resource moves successfully from the passive node. Furthurmore, When I shutdown the active node with "shutdown -hy 0" command, after shuting down the active node automatically restart.

Please help me.
Regards
Athar

This problem should be directed to Red Hat support.