I'm trying to get wpasupplicant working under Ubuntu 'Breezy' 5.10.
My wireless card is an SMC2835W which is working well w/ the Prism54 driver with the network 'open'. ( Linksys WRTG54G wireless router, WPA capable.)
I've installed wpasupplicant w/ apt-get, and edited my wpa_supplicant.conf file as follows:
#WPA-PSK/TKIP "Home Network"
network={
ssid="myhomenetwork"
key_mgmt=WPA-PSK
proto=WPA
pairwise=TKIP
psk="mypassphrase"
}
When I input the following (with the proper 'sudo' permissions) in a terminal:
gdub@devoid:~$ wpa_supplicant -ieth1 -c/etc/wpa_supplicant.conf -Dprism54 -dd
I get the following output which 'loops' continuously until I Ctrl-C it:
Trying to associate with 00:0f:66:90:b2:d1 (SSID='myhomenetwork' freq=2437 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:0F:66:90:B2
1 (00)'Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:0F:66:90:B2
1 (00)'Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:0F:66:90:B2
1 (00)'Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:0F:66:90:B2
1 (00)'Wireless event: cmd=0x8b04 len=12
Wireless event: cmd=0x8b1a len=22
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:0F:66:90:B2
1 (00)'State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_prism54_set_countermeasures - not yet implemented
No keys have been configured - skip key clearing
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Because I'm fairly 'n00b' @ linux, the output is a bit 'cryptic' to me...
If anyone could decipher something in there which would help me 'pinpoint' why I can't make an encrypted connection to my router, I'd greatly appreciate it!
Thanks!
