I have an WPC54G ver2 im using a knoppix 4.0 -----
im using an Aspire 3002LCI laptop
so i download some drivers to istalled apperantly work becuze i see the power on of the wireless card but it seems not to get my network connect all is see is some off/any which mean that is not connected some help pls maybe im missing something thank you after i done ill post my result with a good tutorial on how to make your wirelles done thnaks again
So I stared my configuration with
root@0[wireless]# ndiswrapper -i lstinds.inf
Installing lstinds
root@0[wireless]# ndiswrapper -l
Installed ndis drivers:
lstinds driver present, hardware present
root@0[wireless]# modprobe ndiswrapper
root@0[wireless]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11g ESSID
ff/any
Mode:Managed Frequency:2.412 GHz Access Point: 00:00:00:00:00:00
Bit Rate:54 Mb/s Tx-Power:10 dBm Sensitivity=0/3
RTS thr:4096 B Fragment thr:4096 B
Encryption key
ff
Power Management
ff
Link Quality:100 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root@0[wireless]# dmesg
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
ACPI-0352: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND
search_node cbec4320 start_node cbec4320 return_node 00000000
ACPI-1138: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node cbec4220), AE_NOT_FOUND
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
ACPI-0352: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND
search_node cbec4320 start_node cbec4320 return_node 00000000
ACPI-1138: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node cbec4220), AE_NOT_FOUND
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
APIC error on CPU0: 40(40)
ACPI-0352: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND
search_node cbec4320 start_node cbec4320 return_node 00000000
ACPI-1138: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node cbec4220), AE_NOT_FOUND
APIC error on CPU0: 40(40)
root@0[wireless]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11g ESSID
ff/any
Mode:Managed Frequency:2.412 GHz Access Point: 00:00:00:00:00:00
Bit Rate:54 Mb/s Tx-Power:10 dBm Sensitivity=0/3
RTS thr:4096 B Fragment thr:4096 B
Encryption key
ff
Power Management
ff
Link Quality:100 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root@0[wireless]# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:600 (600.0 b) TX bytes:600 (600.0 b)
root@0[wireless]# iwconfig wlan0 essid myessid key s
assword; pump -i wlan0
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.
