im getting this error message when i try to use the "make all" command on the atmel driver...

it works fine for a while then i get this...

ChoiceCtrl.cpp: In member function 'bool CAutoChoice: :SetStringSelection(const wxString&)':
ChoiceCtrl.cpp:64: void value not ignored as it ought to be
make[1]: *** [ChoiceCtrl.o] Error 1
make[1]: Leaving directory

is there anyway to fix this problem?

i used mandrake before and i just switched to slackware today

thanks for your help...

You don't need Winter or xvnet

Build Winter wxWindows application [y/N] : n


That should help.

If you still have problems then I would try the berlios driver at
http://at76c503a.berlios.de/
and use the "latest cvs tarball".

thanks...i downloaded the belios driver...and followed their instructions to create a working directory in the cvs repository..but now i have no idea what to do

this is what i did
tar xzvf at76c503a-cvsroot.tar.gz
mv at76c503a CVS
cvs -d `pwd`/CVS co at76c503a

now what should i do to get the internet to work on my desktop?

thanks for your help..

should just be able to do make and make install from at76503a directory.
the cvs commands are just for getting the latest cvs files and is not necessary for you.

thanks i did that and everything got installed....

the driver seems to work...when i plug the wireless thing in and put dmesg in the prompt...
dmesg:
hub.c: new USB device 00:1d.2-1, assigned address 8
at76c503-fw_skel .c: using compiled firmware
at76c503.c: $Id: at76c503.c,v 1.46 2004/03/18 20:54:57 jal2 Exp $ compiled mar 21 2004 13:58:38
at76c503.c: firmware version 1.101.0 #86 (fcs_len 4)
at76c503.c: device's MAC 00:0c:41:55:8e:91, regulatory domain FCC (U.S) (id 16)
at76c503.c: registered wlan0

iwconfig wlan0:
wlan0 IEEE 802.11-DS ESSID:"okuwlan" Nickname:"okuwlan"
Mode:Ad-Hoc Channel:10 Cell: 00:00:00:00:00:00
Bit Rate:11mb/s Tx-Power=15 dBm
retry limit:8 RTS thr=1536 B Fragment thr=1536 B
encryption key:off
power management:off
link Quality:0 signal level:0 noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

im not sure what to do now....

w00t!

i got it to work thanks