LinuxQuestions.org
Visit Jeremy's Blog.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 12-16-2004, 09:13 AM   #1
Belegdol
Member
 
Registered: Oct 2003
Location: Poland
Distribution: Fedora 7
Posts: 59

Rep: Reputation: 15
K3b problem


Hi. I recently encountered the following problem when burning cds with k3b: single session works ok, bit attempting to start a multisession cd causes failure. Here is the log:
Code:
System
-----------------------
K3b Version:0.11.16 
KDE Version: 3.2.3
QT Version: 3.3.3

cdrecord
-----------------------
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr//bin/cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4120B'
Revision       : '2.01'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010 
Profile: 0x0008 
Profile: 0x0009 
Profile: 0x000A (current)
Profile: 0x0002 (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   318 MB        
Total size:      364 MB (36:05.97) = 162448 sectors
Lout start:      364 MB (36:07/73) = 162448 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 3
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11745 (97:25/30)
  ATIP start of lead out: 359847 (79:59/72)
  1T speed low:  4 1T speed high: 10
  2T speed low:  4 2T speed high:  0 (reserved val  6)
  power mult factor: 1 5
  recommended erase/write power: 5
  A1 values: 24 1A D8
  A2 values: 26 B2 4A
Disk type:    Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 197399
Speed set to 1411 KB/s
Starting to write CD/DVD at speed   8.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of  318 MB written.
/usr//bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 1E 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63736
cmd finished after 2.181s timeout 40s
/usr//bin/cdrecord: The current problem looks like a buffer underrun.
/usr//bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
/usr//bin/cdrecord: Please report.
/usr//bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
/usr//bin/cdrecord: Success. flush cache: scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.013s timeout 120s
write track data: error after 63488 bytes
Trouble flushing the cache
Writing  time:    8.212s
Average write speed 264.6x.
Fixating...
/usr//bin/cdrecord: Success. close track/session: scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.596s timeout 480s
cmd finished after 0.596s timeout 480s
/usr//bin/cdrecord: Cannot fixate disk.
Fixating time:    0.601s
/usr//bin/cdrecord: fifo had 65 puts and 2 gets.
/usr//bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was 98%.

cdrecord comand:
-----------------------
/usr//bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=12 -tao driveropts=burnfree -eject -multi -xa1 -tsize=163080s - 

mkisofs
-----------------------
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
Warning: creating filesystem with (nonstandard) Joliet extensions
         but without (standard) Rock Ridge extensions.
         It is highly recommended to add Rock Ridge
163080
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
Warning: creating filesystem with (nonstandard) Joliet extensions
         but without (standard) Rock Ridge extensions.
         It is highly recommended to add Rock Ridge
  0.31% done, estimate finish Thu Dec 16 16:05:24 2004
  0.62% done, estimate finish Thu Dec 16 15:59:57 2004
  0.93% done, estimate finish Thu Dec 16 15:58:07 2004
  1.23% done, estimate finish Thu Dec 16 15:57:14 2004
/usr//bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1

mkisofs comand:
-----------------------
/usr//bin/mkisofs -gui -graft-points -volid JULIAN_16 -volset  -appid K3B THE CD KREATOR VERSION 0.11.16 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer K3b - Version 0.11.16 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-jsikorski/k3b4baYha.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-jsikorski/k3bYAFsfb.tmp -untranslated-filenames -max-iso9660-filenames -iso-level 1 -path-list /tmp/kde-jsikorski/k3b49qEDb.tmp /home/jsikorski/.kde/share/apps/k3b/temp/dummydir0/
Any suggestions what is wrong? I have burned multisession cds with Mandrake 10.0 with no problems.
 
Old 02-25-2005, 07:04 AM   #2
Emmanuel_uk
Senior Member
 
Registered: Nov 2004
Distribution: Mandriva mostly, vector 5.1, tried many.Suse gone from HD because bad Novell/Zinblows agreement
Posts: 1,606

Rep: Reputation: 53
Have you tried cdrecord vanilla 2.x (available on the distro) within k3b
I had a bit of a similar issue with mandrake 10.1 and posted the same
suggestion to another thread.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Will k3b convert mp3's to wavs for burning audio cds? And prob with k3b 0.11 Alvis Linux - Software 5 08-02-2007 07:38 AM
FC3 - K3b not recognizing mp3s w/ k3b-mp3 installed! Forezt Linux - Software 2 07-25-2006 05:43 PM
k3b problem bruse Linux - Newbie 3 09-14-2005 07:02 AM
k3b problem koriel Linux - Software 2 07-14-2005 03:14 AM
k3b problem archish Slackware 6 12-04-2003 03:06 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Software

All times are GMT -5. The time now is 12:17 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration