K3b failing to burn .iso in Mandrake 10
I'm trying to burn an ISO file with K3b (version 0.11.6cvs in Mandrake 10) but it keeps failing. Here's part of the output.
.
.
Writing pregap for track 1 at 355744
Starting new track at sector: 355894
Track 01: 0 of 694 MB written.
Track 01: 1 of 694 MB written (fifo 93%) [buf 96%] 3.6x.
Track 01: 2 of 694 MB written (fifo 100%) [buf 97%] 16.8x.
.
.
Track 01: 33 of 694 MB written (fifo 100%) [buf 97%] 16.4x.
Track 01: 34 of 694 MB written (fifo 100%) [buf 98%] 17.0x.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 05 B3 D7 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 4.836s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 36505600 bytes
Writing time: 43.575s
Average write speed 123.5x.
Min drive buffer fill was 96%
Fixating...
Fixating time: 0.003s
/usr/bin/cdrecord: fifo had 639 puts and 576 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 561 times full, min fill was 90%.
Any thoughts?
Thanks.
|