Digital Camera Aiptek Drivers

madmax1143 · 07-17-2006, 06:20 AM

allo
i have a digital photo machine aiptek photo cam 4000
i am new in linux, i am working with kino but i canot get
the capture of my camera. i cannot find drivers or plugins to linux
i have my camera but i can uset
do you have any idea

unSpawn · 07-17-2006, 06:36 AM

Plug it in, list devices with "lsusb" and if it doesn't show look in your syslog (/var/log/messages usually) for any USB messages. Find the vendor/device ID, check the LQ HCL and if it doesn't show head over to http://www.qbik.ch/usb/devices/searc...pattern=aiptek and search the database. If the chipset is supported there is a driver. If it's the "Aiptek Pocket Cam 4000" http://www.qbik.ch/usb/devices/showdev.php?id=2928 then you're SOL.

madmax1143 · 07-17-2006, 07:44 AM

thank you for the help
i discover the id 08 ca :2028
then i whent to the site that you gave me
there are no drivers for my cam but i saw
a few lines of commands

what i do whit that lines?
what is SOL ?
there are any solution to me

thenk you

unSpawn · 07-17-2006, 12:22 PM

there are no drivers for my cam but i saw a few lines of commands
Haven't seen any. Post the URI or the lines?

what is SOL ?
The polite form could be: "sadly out of luck".

madmax1143 · 07-17-2006, 11:03 PM

the line of commands that i see are

Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=08ca ProdID=2028 Rev= 1.00
S: Manufacturer=AF Cam
S: Product=AF Cam
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 128 Ivl=1ms
I: If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=1ms
I: If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms
I: If#= 0 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 640 Ivl=1ms
I: If#= 0 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 768 Ivl=1ms
I: If#= 0 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 896 Ivl=1ms
I: If#= 0 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 1 Ivl=1ms

i realy dont no if i can do ahything.
by the way thanks for thr SOL (sadly out of luck)
thanks for the help

unSpawn · 07-18-2006, 04:04 AM

P: Vendor=08ca ProdID=2028 Rev= 1.00
So it is the Aiptek Pocket Cam 4000. qbik.ch shows that for the webcam part there is no driver available now. I don't know if its Compact Flash can be seen over USB as USB Mass Storage device but if it can't then you can at least take it out and use a card reader.

madmax1143 · 07-18-2006, 05:17 AM

yes i can see the usb card
thanks for the help