VBox (closed source) USB Functionality help
I have some questions about magicjack and Vbox-XP(closed source version). ...
With a previous install of Debian (i think etch; currently I'm using lenny) I would plug it in and both the usb and 'cdrom' partitions automatically mounted. Which made my experience with Vbox-XP and magicjack pleasant. I abandoned the project when I test called my wife and the sound was very choppy. I want to try this again but it doesn't automount when I plug it in (other usb devices do automount though). Manually I can mount the .iso image and the usb partition separately. I have Vbox's usb filter set for this device, but once I'm logged on XP I cannot access it. The .iso image that is also on there can be accessed, though. As I have already said it was working previously, perhaps I have changed something minor in a .config file or some package wasn't installed this time around. I'm so very close...
for what it is worth dmesg output:
[ 4543.214606] usb 1-1: USB disconnect, address 5
[ 4546.704066] usb 1-1: new full speed USB device using uhci_hcd and address 6
[ 4547.159046] usb 1-1: configuration #1 chosen from 1 choice
[ 4547.165316] scsi8 : SCSI emulation for USB Mass Storage devices
[ 4547.165513] usb-storage: device found at 6
[ 4547.165517] usb-storage: waiting for device to settle before scanning
[ 4547.220096] hiddev96hidraw0: USB HID v1.00 Device [TigerJet Network, Inc. USB Internet Phone by TigerJet] on usb-0000:00:1d.0-1
[ 4547.220096] usb 1-1: New USB device found, idVendor=06e6, idProduct=c200
[ 4547.220096] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=96
[ 4547.220096] usb 1-1: Product: USB Internet Phone by TigerJet
[ 4547.220096] usb 1-1: Manufacturer: TigerJet Network, Inc.
[ 4547.220096] usb 1-1: SerialNumber: A9210507008315
[ 4552.181050] usb-storage: device scan complete
[ 4552.183116] scsi 8:0:0:0: Direct-Access YMAX MagicJack 2.00 PQ: 0 ANSI: 2
[ 4552.185920] scsi 8:0:0:1: CD-ROM YMAX MagicJack 2.00 PQ: 0 ANSI: 2
[ 4552.193633] sd 8:0:0:0: [sdd] 36352 512-byte hardware sectors (19 MB)
[ 4552.197663] sd 8:0:0:0: [sdd] Write Protect is off
[ 4552.197663] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 4552.197663] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 4552.206625] sd 8:0:0:0: [sdd] 36352 512-byte hardware sectors (19 MB)
[ 4552.209661] sd 8:0:0:0: [sdd] Write Protect is off
[ 4552.209661] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 4552.209661] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 4552.209661] sdd: unknown partition table
[ 4552.423775] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 4552.423775] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 4552.446116] sr0: scsi3-mmc drive: 0x/0x caddy
[ 4552.446285] sr 8:0:0:1: Attached scsi CD-ROM sr0
[ 4552.446371] sr 8:0:0:1: Attached scsi generic sg2 type 5
[ 4553.626887] usb 1-1: reset full speed USB device using uhci_hcd and address 6
[ 4553.833370] sr 8:0:0:1: [sr0] Device not ready: Sense Key : Not Ready [current]
[ 4553.833370] sr 8:0:0:1: [sr0] Device not ready: Add. Sense: Medium not present
[ 4553.833370] end_request: I/O error, dev sr0, sector 0
[ 4553.833370] Buffer I/O error on device sr0, logical block 0
[ 4553.839200] sr 8:0:0:1: [sr0] Device not ready: Sense Key : Not Ready [current]
[ 4553.839200] sr 8:0:0:1: [sr0] Device not ready: Add. Sense: Medium not present
[ 4553.839200] end_request: I/O error, dev sr0, sector 4
[ 4553.839200] Buffer I/O error on device sr0, logical block 1
[ 4553.845074] sr 8:0:0:1: [sr0] Device not ready: Sense Key : Not Ready [current]
[ 4553.845074] sr 8:0:0:1: [sr0] Device not ready: Add. Sense: Medium not present
[ 4553.845074] end_request: I/O error, dev sr0, sector 0
[ 4553.845074] Buffer I/O error on device sr0, logical block 0
[ 4553.845074] Buffer I/O error on device sr0, logical block 1
thanks in advance,
add1kt
|