Hi,
I have problems mounting my second drive at boot automatically.
(sorry i am a noob)
When i use the mount command, it works fine.
Code:
mount -t ext3 /dev/sdb2 /mnt/HD/HD_b2
But when i try to add one if the following lines to /etc/fstab
It will not mount the drive at boot or with
, also fstab is empty afer reboot (normal??)
Code:
/dev/sdb2 /mnt/HD/HD_b2 ext3 defaults,errors=remount-ro 0 1
Code:
UUID=553afede-fa45-4cdc-9972-c0a9aa899509 /mnt/HD/HD_b2 ext3 errors=remount-ro 0 1
Code:
/dev/sdb2 /mnt/HD/HD_b2 ext3 rw 0 0
Code:
/dev/sdb2 /mnt/HD/HD_b2 ext3 defaults 0 1
output blkid:
Code:
/dev/sda1: UUID="e67e5c15-7b8b-9389-c311-e5d4c61326f9" TYPE="linux_raid_member"
/dev/sda2: UUID="09e0e365-0aa6-4214-b571-2bc6b027fd9f" TYPE="ext3"
/dev/sda4: UUID="64038414-136c-4939-bd14-9871a20290bd" TYPE="ext3"
/dev/sdb1: UUID="e67e5c15-7b8b-9389-c311-e5d4c61326f9" TYPE="linux_raid_member"
/dev/sdb2: UUID="553afede-fa45-4cdc-9972-c0a9aa899509" TYPE="ext3"
/dev/sdb4: UUID="bf594be6-ffb6-469d-a3a8-246be66a4d90" TYPE="ext2"
/etc/mtab:
Code:
rootfs / rootfs rw 0 0
/dev/root / ext2 rw,relatime,errors=continue 0 0
sysfs /sys sysfs rw,relatime 0 0
proc /proc proc rw,relatime 0 0
squash /usr/local/tmp ramfs rw,relatime,size=38m 0 0
/dev/loop0 /usr/local/modules squashfs ro,relatime 0 0
/dev/mtdblock5 /usr/local/config jffs2 rw,relatime 0 0
/dev/sda4 /mnt/HD_a4 ext3 rw,relatime,errors=continue,data=writeback 0 0
/dev/sdb4 /mnt/HD_b4 ext2 rw,relatime,errors=continue 0 0
none /proc/bus/usb usbfs rw,relatime 0 0
/dev/sda2 /mnt/HD/HD_a2 ext3 rw,relatime,errors=continue,user_xattr,data=writeb$
/dev/sdb2 /mnt/HD/HD_b2 ext3 rw,relatime,errors=continue,user_xattr,data=writeb$
/dev/sda2 /mnt/HD/HD_a2/squeeze/mnt/HD/HD_a2 ext3 rw,relatime,errors=continue,u$
/dev/root /mnt/HD/HD_a2/squeeze/mnt/root ext2 rw,relatime,errors=continue 0 0
/dev/root /mnt/HD/HD_a2/squeeze/dev ext2 rw,relatime,errors=continue 0 0
sysfs /mnt/HD/HD_a2/squeeze/sys sysfs rw,relatime 0 0
proc /mnt/HD/HD_a2/squeeze/proc proc rw,relatime 0 0
When mount command is used
Code:
mount -t ext3 /dev/sdb2 /mnt/HD/HD_b2
The following line is added to mstab -->
Code:
/dev/sdb2 /mnt/HD/HD_b2 ext3 rw 0 0
I diont know what i am doing wrong, mount for HD_a2 works fine (other disk, worked at default), i hav e NAS DNS-325 where i installed Debian on. I used
this tutorial to install debian.
The strange thing is, i had to reinstall my NAS, and befor it worked fine after i had installed debian 2 years ago, i just dont remeber how i fixed this.
