hi i have configured my nokia 3230 as a modem on debian

root@satish:/home/satish# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Nokia
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

as u can see above my modem was gettin detected.
but when i tried dialing it never got connected.. iam sending the log file:

root@satish:/home/satish# --> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttyACM0: Input/output error
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","TATA.DOCOMO.INTERNET"
AT+CGDCONT=1,"IP","TATA.DOCOMO.INTERNET"
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Waiting for prompt.
--> Connected, but carrier signal lost! Retrying...
--> Sending: ATDT*99***1#
--> Waiting for carrier.
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.

i am using a tata docomo connection, please help me!

Please do not post duplicate threads. Reported...

Josh

Please post your thread in only one forum. Posting a single thread in the most relevant forum will make it easier for members to help you and will keep the discussion in one place. This thread is being closed because it is a duplicate.