Linux - NetworkingThis forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
To give an overview of how my home LAN is setup, here is a diagram (it may not be of any significance
PC2 Wifi AP PC3 Printserver
| | | |
Internet <--> [ADSL Router] <---> [D-Link Switch]
| |
PC1 Laptop
The printserver is a Intel Netport Express 10/100, with 2 x parallel ports and 1 x serial port. It has been functioning fine until recently, where when it is plugged into the switch, it blocks all traffic from the switch to the rest of the nework, for anything. When the printserver is not plugged into the LAN then everything works fine.
I am not sure why it would do this... Does anyone have any ideas?
Actually I don't think the switch has an IP. Usually they are pretty dumb pieces of hardware. I was suggeting that the print server had the same IP as another device on the network like the router or another computer. If everything is running on DHCP then a conflict is unlikely, but if you are mixing DHCP with static IP then there might be a problem. I'd still check into what devices have what IP.
Are there any "special" ports on the switch? What I'm getting at is are there any ports that are designed for specific tasks like connecting to the router or might need a crossover cable. Usually they don't, but it might be worth a look in the manual.
The other thing to try might be to listen to your network traffic with something like ethereal. I'd do it with the printer server unattached to get a baseline of what kind of traffic is normal and then plug in the print server and see if anything changes.
Needless to say I don't have any real explanations for what your are seeing, I'm just suggesting some ways to try and figure out what is happening.
As regard to special ports, the router has an uplink port which is connected with a patch cable to a normal port on the switch. I think the uplink port has the same effect as a crossover cable.
I certainly will try watching stuff with ethereal, and will let you know the results.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.