vlan - multiple ip -same nic

lord-fu · 12-06-2007, 02:24 PM

Hello and mtia.

If I have a vlan setup on eth2.4 for example and I have already assigned an ip address. How could I assign an additional ip to this vlan interface.

Code:

DEVICE=eth2.4
BOOTPROTO=static
HWADDR=X:X:X:x:x:X
ONBOOT=yes
TYPE=Ethernet
IPADDR=172.13.4.1
BROADCAST=172.13.4.255
NETMASK=255.255.255.0
USERCTL=no
IPV6INIT=no
PEERDNS=yes
VLAN=yes

For example what if I wanted to add 10.10.0.219 / 24

Again thank you.

lord-fu · 12-06-2007, 03:20 PM

Well it was easier than I thought it should have been. I copied the ifcfg-eth2.4 file to ifcfg-eth2.4:1 and made changes and it worked fine. Let me know if I am wrong, but everything works like it should so far.