hello:
i have 3 identical devices, A, B, C, and i want them to communicate peer to peer on AD-HOC mode.

ex: A<->B or A<->C, only 2 devices communicated at the same time.

my configuration is as below:
1.essid: (A,B,C are all the same)
2.channel: 3 (A,B,C are all the same)
3.NetworkType:Ad-hoc (A,B,C are all the same)
4.ip: A:192.168.56.103
B:192.168.56.104
C:192.168.56.105
[command]:
1.iwconfig ra0 essid [ID]
2.iwconfig ra0 channel 3
3.iwconfig ra0 mode Ad-hoc
4.ifconfig ra0 [IP]

first of all, connection between A and B is ok (A and B could ping to each other), and then i tried to connect A and C,... failed!!

my 2nd configuration is [essid and 3rd code of ip] of [B and C] are different, when A will connect to B, set the same essid and class C IP as B, and A successfully connect to B, but A<->C(set the same essid and class C IP as C) failed!!!

my wifi driver is ralink rt3070...
i have no idea to solve this problem...do i miss something???
could any body help~ any advice will be very appreciate and ...
forgive my bad english~
thank you very much~~

You can use master mode for one of the devices and connect other machines to it.

1 members found this post helpful.