Hi all,
I have 2 HP ProLiant DL585 (G7) connected directly (no switch).
Those servers has:
Code:
Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter
network cards.
The system sees this cards as 1Gbit:
Code:
ethtool eth3
Settings for eth3:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 3
Transceiver: external
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: g
Wake-on: g
Link detected: yes
Other info:
Code:
ethtool -i eth3
driver: netxen_nic
version: 4.0.72
firmware-version: 4.0.527
bus-info: 0000:04:00.3
I'm running slackware 13.1 (2.6.33.4-smp).
Any suggestion to get 10Gbit bandwidth ?
Thanks