Getting a USB network abapter to work

shaiss · 04-13-2010, 12:41 PM

We have a TrendNet TU2-ET100 and need to get it working under FC2 and K2.6.7. The chip manufacture ASIX says there driver works under kernel 2.6.7. But after compling their driver and using modprobe to load it no luck.

Below are some outputs, hope someone can point me in the right direction:
dmesg | grep eth http://pastie.org/private/nl601dxeybxm39mmxstz5g
/sbin/lsmod http://pastie.org/917799
/sbin/ifconfig http://pastie.org/private/8rdnqdvtnc9teaz7wbi6bq
/etc/init.d/network restart http://pastie.org/917807

[root@ipina ipina]# /sbin/lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp.
Bus 001 Device 001: ID 0000:0000

hi2arun · 04-13-2010, 04:58 PM

Well, all the interfaces were detected as per dmesg output. Can you print the output for

Quote:

ifconfig -a

Looks like eth2 and eth3 are configured as DHCP and failing to fetch IP. Check if DHCP server is running or change those interfaces to static mode.

cola · 04-13-2010, 06:05 PM

Quote:

Originally Posted by shaiss

We have a TrendNet TU2-ET100 and need to get it working under FC2 and K2.6.7. The chip manufacture ASIX says there driver works under kernel 2.6.7. But after compling their driver and using modprobe to load it no luck.

Below are some outputs, hope someone can point me in the right direction:
dmesg | grep eth http://pastie.org/private/nl601dxeybxm39mmxstz5g
/sbin/lsmod http://pastie.org/917799
/sbin/ifconfig http://pastie.org/private/8rdnqdvtnc9teaz7wbi6bq
/etc/init.d/network restart http://pastie.org/917807

[root@ipina ipina]# /sbin/lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp.
Bus 001 Device 001: ID 0000:0000

Post:

Code:

ifconfig -a
route -n