Hello,

my wireless card on ADM8211 chipset after inserting into slot is getting crazy by switching channels ....
All this either goes into stdout or syslog, hard drive is constantly busy writing down this crap.....

after some 100 thousand cycles it stops.

anyideas how to fix that?
thank you very much

See log:
Jul 28 23:15:53 HomeServer kernel: cs: cb_alloc(bus 2): vendor 0x1317, device 0x8201
Jul 28 23:15:53 HomeServer kernel: PCI: Enabling device 02:00.0 (0000 -> 0003)
Jul 28 23:15:53 HomeServer kernel: ADM8211 Linux driver version 1.05 (June 24, 2003)
Jul 28 23:15:53 HomeServer kernel: PCI: Setting latency timer of device 02:00.0 to 64
Jul 28 23:15:54 HomeServer kernel: 8211: Hardware Address 00:04:E2:7F:A3:16, IRQ 11.
Jul 28 23:15:54 HomeServer kernel: eth0: ADMtek Wireless rev 32 at 0x4400
Jul 28 23:15:54 HomeServer kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Jul 28 23:15:54 HomeServer kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x100-0x107 0x170-0x
177 0x370-0x37f 0x4d0-0x4d7
Jul 28 23:15:54 HomeServer kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Jul 28 23:15:54 HomeServer kernel: set channel 1
Jul 28 23:15:54 HomeServer kernel: set channel 2
Jul 28 23:15:54 HomeServer kernel: set channel 3
Jul 28 23:15:54 HomeServer kernel: set channel 4
Jul 28 23:15:54 HomeServer kernel: set channel 5
Jul 28 23:15:54 HomeServer kernel: set channel 6
Jul 28 23:15:54 HomeServer kernel: set channel 7
Jul 28 23:15:54 HomeServer kernel: set channel 8
Jul 28 23:15:54 HomeServer kernel: set channel 9
Jul 28 23:15:54 HomeServer sshd: succeeded
Jul 28 23:15:54 HomeServer kernel: set channel 10
Jul 28 23:15:54 HomeServer kernel: set channel 11
Jul 28 23:15:54 HomeServer sshd:
Jul 28 23:15:54 HomeServer kernel: set channel 12
Jul 28 23:15:54 HomeServer kernel: set channel 13
Jul 28 23:15:54 HomeServer kernel: set channel 14
Jul 28 23:15:54 HomeServer kernel: set channel 6
Jul 28 23:15:54 HomeServer kernel: set channel 1
Jul 28 23:15:54 HomeServer kernel: set channel 2
Jul 28 23:15:54 HomeServer kernel: set channel 3


.................

Hey DBabo,

By any chance did you get this working? I'm up against exactly the same thing right now with an ADM8211 based wireless card and RedHat 9.

Any help would be appreciated.

Phil.

See here :http://www.linuxquestions.org/questi...1&pagenumber=2

i just got back from vacation and haven't been able to update .
But the situation is the same - it doesn't work for me.
Please allow a couple of days - i'll be back with, hopfully new info.