LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 09-04-2004, 08:15 AM   #1
freeindy
Member
 
Registered: Nov 2002
Posts: 207

Rep: Reputation: 32
usb stick


hi,

i running crux 1.3 distro. i wanted to get my 128mb usb stick but i can't get it to work.

lsmod gives:

Code:
Module                          Size      Used by      Not Tained
usb-storage                 26456    0 (unused)
usbcore                       42248    0 [usb-storage]
....
the usb stick is connected and the light is on.

but as many docs says to find /dev/sda1, there is none... i don't know where to look.

dmesg in the end says:

Code:
...
usb.c: registered new driver usb-storage
USB Mass Storage support registered
...
does anyone have any idea how to fix this?
would appretiate any help. thanks

indy
 
Old 09-04-2004, 11:07 AM   #2
hw-tph
Senior Member
 
Registered: Sep 2003
Location: Sweden
Distribution: Debian
Posts: 3,032

Rep: Reputation: 58
What does dmesg have to say after you have plugged it in? Boot without the USB memory connected and then plug it in. Check the dmesg output after that.

In order to get USB working you may also have to load a USB host driver, like uhci-hcd or ohci-hcd, in the event that these are not built into the kerne or auto-loaded on startup.

Håk
 
Old 09-04-2004, 12:13 PM   #3
freeindy
Member
 
Registered: Nov 2002
Posts: 207

Original Poster
Rep: Reputation: 32
hi Håk.

I included uhci (usb 2.0) into kernel and recompiled it. this is what it says on dmesg

Code:
hub.c: new USB device 00:1d.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x781/0x7112) is not claimed by any active driver.
usb.c: USB disconnect on device 00:1d.2-1 address 2
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:1d.2-1, assigned address 3
scsi1 : SCSI emulation for USB Mass Storage devices
host/usb-uhci.c: interrupt, status 3, frame# 1289
  Vendor: SanDisk   Model: Cruzer Micro      Rev: 2033
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
and now, i cannot modprobe usbcore. only usb-storage... ???

and from /proc/scsi-usb-storage-0/1 i get

Code:
indy$cat /proc/scsi/usb-storage-0/1 
   Host scsi1: usb-storage
       Vendor: SanDisk Corp.
      Product: Cruzer Micro
Serial Number: 0000403489
     Protocol: Transparent SCSI
    Transport: Bulk
         GUID: 078171120000000000403489
     Attached: Yes
indy

Last edited by freeindy; 09-04-2004 at 12:16 PM.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
mount/umount usb stick - PQI Intelligent Stick 2.0 sandbag Linux - Software 5 05-06-2005 11:12 AM
USB-Stick? Please help GSX Debian 7 02-16-2005 02:12 AM
USB stick bardia_amir Linux - Hardware 3 08-29-2004 11:30 PM
USB problems: Memorex USB stick 256MB and PSX to USB adapter by Radio Shack Knuckles T15 Linux - Hardware 1 05-19-2004 06:58 PM
USB-Stick/usb-storage JC_at_LQ Linux - General 2 07-14-2003 06:56 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 10:02 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration