I wanted to post a few more things to help out.
Im running Suse Linux 9.0 Pro with kernel 2.4.21-243-athlon.
This is the contents of /var/log/boot.msg :
Inspecting /boot/System.map-2.4.21-243-athlon
Loaded 21354 symbols from /boot/System.map-2.4.21-243-athlon.
Symbols match kernel version 2.4.21.
Loaded 143 symbols from 6 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.21-243-athlon (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Thu Aug 12 15:24:15 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
<4> BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
<4> BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
<4> BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<5>566MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>446MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<4>On node 0 totalpages: 114416
<4>zone(0): 4096 pages.
<4>zone(1): 110320 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 PTLTD ) @ 0x000f72b0
<6>ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1bef8cca
<6>ACPI: FADT (v001 ATI Raptor 01540.00000) @ 0x1befee2b
<6>ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1befee9f
<6>ACPI: SSDT (v001 PTLTD POWERNOW 01540.00000) @ 0x1befeec7
<6>ACPI: DSDT (v001 ATI U1_M1535 01540.00000) @ 0x00000000
<5>ACPI: Skipping APIC setup
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/hda2 vga=0x317 splash=silent desktop hdc=ide-scsi hdclun=0 showopts
<6>bootsplash: silent mode.
<6>ide_setup: hdc=ide-scsi
<6>ide_setup: hdclun=0
<6>Initializing CPU#0
<4>Detected 1854.909 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 3670.01 BogoMIPS
<6>Memory: 448528k/457664k available (1730k kernel code, 8748k reserved, 606k data, 176k init, 0k highmem)
<6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
<7>CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
<4>CPU: AMD mobile AMD Athlon(tm) XP2500+ stepping 00
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20030619
<6>PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2
<6>PCI: Using configuration type 1
<6>Looking for DSDT in initrd ... not found!
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S3 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 10)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 9)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 9)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
<4>ACPI: PCI Interrupt Link [LNKU] (IRQs 3)
<6>ACPI: Embedded Controller [EC0] (gpe 24)
<3>schedule_task(): keventd has not started
<6>PCI: Probing PCI hardware
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
<7>00:00:01[A] -> IRQ 10 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 9
<7>00:00:02[A] -> IRQ 9 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
<7>PIC: IRQ (9) already programmed
<4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
<7>00:00:08[A] -> IRQ 3 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
<7>00:00:06[A] -> IRQ 5 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<7>00:00:12[A] -> IRQ 11 Mode 1 Trigger 1
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
<7>PIC: IRQ (9) already programmed
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
<7>PIC: IRQ (10) already programmed
<7>PIC: IRQ (10) already programmed
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (11) already programmed
<7>PIC: IRQ (10) already programmed
<4>PCI: No IRQ known for interrupt pin A of device 00:10.0
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS not found.
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 28604
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xdc81e000, size 65472k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
<6>vesafb: protected mode interface info at c000:51a9
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.0.9-2003/09/08: looking for picture... no good signature found.
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>Redundant entry in serial pci_table. Please send the output of
<4>lspci -vv, this message (10b9,5457,103c,0024)
<4>and the manufacturer and name of serial board or modem board
<4>to
serial-pci-info@lists.sourceforge.net.
<4>register_serial(): autoconfig failed
<6>Real Time Clock Driver v1.10e
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<3>Warning: ATI Radeon IGP Northbridge is not yet fully tested.
<6>ALI15X3: IDE controller at PCI slot 00:10.0
<4>PCI: No IRQ known for interrupt pin A of device 00:10.0
<6>ALI15X3: chipset revision 196
<6>ALI15X3: not 100%% native mode: will probe irqs later
<6> ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda
MA, hdb
io
<6> ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc
MA, hdd
io
<4>hda: ST94011A, ATA DISK drive
<4>blk: queue c03e86c0, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: attached ide-disk driver.
<4>hda: host protected area => 1
<6>hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=4864/255/63, UDMA(100)
<6>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hda: hda1 hda2
<6>ide-floppy driver 0.99.newide
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cryptoapi: loaded
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 245k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (device ide0(3,2)) ...
<4>for (ide0(3,2))
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 176k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<4>reiserfs: enabling write barrier flush mode
<6>lvm-mp: allocating 42 lowmem entries at c232b000
<6>LVM version 1.0.5+(mp-v6d)(22/07/2002) module loaded
<4>reiserfs: enabling write barrier flush mode
<6>Adding Swap: 899600k swap-space (priority 42)
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<6>SCSI subsystem driver Revision: 1.00
<4>hdc: attached ide-scsi driver.
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VH04
<4> Type: CD-ROM ANSI SCSI revision: 02
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Jan 28 14:03:52 2005
<notice>run boot scripts (boot.proc)
<notice>exit status of (boot.proc) is (0)
<notice>run boot scripts (boot.md)
<notice>exit status of (boot.md) is (0)
<notice>run boot scripts (boot.lvm)
Run file system check on root for LVM activation
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal
Blocks (total/free): 9542610/131769 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
done
<notice>exit status of (boot.lvm) is (0)
<notice>run boot scripts (boot.localfs)
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal
Blocks (total/free): 9542610/131769 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules)
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shmdone
Restore device permissionsdone
Loading required kernel modules
Warning: ignoring dma=1, no such parameter in this module
Module ide-cd loaded, with warnings
done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'linux'done
Setting up loopback interface ifup [DEBUG] lo -o rc
ifup [DEBUG] HWDESC = lo CONFIG = lo INTERFACE = lo
ifup-wireless [DEBUG] lo lo -o rc
ifup-wireless [DEBUG] unknown option rc ignored
ifup [DEBUG] Handling Index <>:
IPADDR = 127.0.0.1
PREFIXLEN = 8
CHECK_DUPLICATE_IP = no
ifup-route [DEBUG] lo lo -o rc
ifup-route [DEBUG] unknown option rc ignored
done
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
Creating /var/log/boot.msg
done<notice>killproc: kill(27,29)
System Boot Control: The system has been setup
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
done<notice>exit status of (boot.klog boot.ipconfig) is (0 0)
<notice>killproc: kill(27,3)
Boot logging started on /dev/tty1(/dev/console) at Fri Jan 28 20:04:01 2005
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random)
Initializing random number generatordone
<notice>exit status of (random) is (0)
<notice>start services (network)
S05network [DEBUG] start
S05network [DEBUG] CONFFILES = ifcfg-lo ifcfg-eth-pcmcia ifcfg-eth0 ifcfg-wlan-pcmcia-0 ifcfg-ppp0
S05network [DEBUG] CONFIG =
S05network [DEBUG] INTERFACE =
Setting up network interfaces:
lo ifup [DEBUG] lo -o onboot rc
ifup [DEBUG] HWDESC = lo CONFIG = lo INTERFACE = lo
ifup-wireless [DEBUG] lo lo -o onboot rc
ifup-wireless [DEBUG] unknown option rc ignored
ifup [DEBUG] Handling Index <>:
IPADDR = 127.0.0.1
PREFIXLEN = 8
CHECK_DUPLICATE_IP = no
ifup-route [DEBUG] lo lo -o onboot rc
ifup-route [DEBUG] unknown option rc ignored
S05network [DEBUG]
(returned 0)done
eth-pcmcia ifup [DEBUG] eth-pcmcia -o onboot rc
ifup [DEBUG] HWDESC = eth-pcmcia CONFIG = eth-pcmcia INTERFACE = nointerface
ifup [DEBUG] STARTMODE 'hotplug' of configuration 'eth-pcmcia' does not match current MODE 'onboot'
S05network [DEBUG]
(returned 5)hotplug
eth0 ifup [DEBUG] eth0 -o onboot rc
ifup [DEBUG] HWDESC = eth-pci-00-12.0 CONFIG = eth0 INTERFACE = eth0
ifup-wireless [DEBUG] eth0 eth0 -o onboot rc
ifup-wireless [DEBUG] unknown option rc ignored
ifup-dhcp [DEBUG] eth0 eth0 -o onboot rc
ifup-dhcp [DEBUG] Starting service dhcp client on eth0
ifup-dhcp (DHCP)
<notice>startproc: execve (/sbin/dhcpcd) [ /sbin/dhcpcd -D -R -N -t 999999 -h linux eth0 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh OLDPWD=/etc/sysconfig/network progress=17 INIT_VERSION=sysvinit-2.82 RUN_FROM_RC=yes REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/etc/sysconfig/network PREVLEVEL=N LINES=48 HOME=/ SHLVL=4 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/dhcpcd ]
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp .
ifup-dhcp no IP address yet... backgrounding.
S05network [DEBUG]
(returned 0)done
wlan-pcmcia-0 ifup [DEBUG] wlan-pcmcia-0 -o onboot rc
ifup [DEBUG] HWDESC = wlan-pcmcia-0 CONFIG = wlan-pcmcia-0 INTERFACE = nointerface
ifup [DEBUG] STARTMODE 'hotplug' of configuration 'wlan-pcmcia-0' does not match current MODE 'onboot'
S05network [DEBUG]
(returned 5)hotplug
ppp0 ifup [DEBUG] ppp0 -o onboot rc
ifup [DEBUG] HWDESC = ppp0 CONFIG = ppp0 INTERFACE = ppp0
ifup [DEBUG] STARTMODE 'manual' of configuration 'ppp0' does not match current MODE 'onboot'
S05network [DEBUG]
(returned 5)manual
ifup-route [DEBUG] noiface -o onboot rc
ifup-route [DEBUG] unknown option rc ignored
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=18 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=18 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (hotplug)
Starting hotplugging services [ ieee1394 net pci usb .. ]done
<notice>exit status of (hotplug) is (0)
<notice>start services (resmgr pcmcia)
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Starting external PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr -m /lib/modules/2.4.21-243-athlon/ -n pcmcia-external ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=20 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
startproc: exit status of parent of /sbin/cardmgr: 1
failed
<notice>exit status of (resmgr pcmcia) is (0 7)
<notice>start services (webmin portmap)
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
<notice>exit status of (webmin portmap) is (0 0)
<notice>start services (smbfs)
Mount SMB File System unused
<notice>exit status of (smbfs) is (6)
<notice>start services (xinetd sshd smpppd nscd fbset cron alsasound acpid)
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting CRON daemondone
Starting INET services. (xinetd)done
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SMPPPDdone
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
Loading ACPI modules (ac battery button fan processor thermal ) done
Starting acpid done
Starting sound driver: ali5451Warning: ignoring snd_spdif=0, no such parameter in this module
Module snd-ali5451 loaded, with warnings
done
Restoring the previous sound settingdone
<notice>exit status of (xinetd sshd smpppd nscd fbset cron alsasound acpid) is (0 0 0 0 0 0 0 0)
<notice>start services (kbd cpufreqd)
<notice>startproc: execve (/usr/sbin/cpufreqd) [ /usr/sbin/cpufreqd -d -a /proc/acpi/ac_adapter/ACAD/state ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=38 _=/sbin/startproc DAEMON=/usr/sbin/cpufreqd ]
Starting cpufreqd done
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Stop Unicode mode
doneLoading console font lat1-16.psfu -m none (B
done<notice>exit status of (kbd cpufreqd) is (0 0)
<notice>start services (hwscan)
Starting hardware scan on boot<notice>exit status of (hwscan) is (0)
<notice>start services (xdm)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=36 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=en_US PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=en_US splash=silent sscripts=38 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm) is (0)
<notice>start services (vmware)
Starting VMware services:
Virtual machine monitor done
Virtual ethernet done
Bridged networking on /dev/vmnet0 done
Host-only networking on /dev/vmnet1 (background) done
Host-only networking on /dev/vmnet8 (background) done
NAT service on /dev/vmnet8 done
<notice>exit status of (vmware) is (0)
<notice>start services (touchpad)
/etc/init.d/rc5.d/S84touchpad: line 15: /etc/init.d/functions: No such file or directory
Turning off Touch-Pad 'tapping'
========================================================================
= =
= tpconfig version: 3.1.3 =
= =
= Synaptics Touchpad and ALPS GlidePad/Stickpointer configuration tool =
= =
= Copyright (C) 1997 C. Scott Ananian<cananian@alumni.princeton.edu> =
= Copyright (C) 1998-2001 Bruce Kall <kall@compass.com> =
= Last Modified (Version 3.1.3) by Bruce Kall, 2/22/2002 =
= =
= tpconfig comes with ABSOLUTELY NO WARRANTY. This is free software, =
= and you are welcome to redistribute it under the terms of the GPL. =
= =
========================================================================
Found Synaptics Touchpad.
Firmware: 5.9 (single-byte mode).
Tap gestures: disabled.
/etc/init.d/rc5.d/S84touchpad: line 26: echo_success: command not found
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: pcmcia
Skipped services in runlevel 5: smbfs
<notice>exit status of (touchpad) is (0)
<notice>killproc: kill(308,3)
