Hello,

I am using Pixelview Play TV Pro 2 tv tuner card on my fedora core 5. When I use mythtv or tvtime, I am getting video out but no audio... I googled and did all I could think of doing... I am a newbie to linux, so my description might sound a bit naive.

In the /etc/modprobe.d/bttv file I have
options bttv card=37 tuner=38 gbuffers=8 automute=0 gpiomask=0x108007 audiomux=33,32,35,35,40 bttv_verbose=0

The dmesg reads like this:
bttv: driver version 0.9.16 loaded
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:01:00.0, irq: 16, latency: 32, mmio: 0xd8100000
bttv0: using: Prolink PixelView PlayTV pro [card=37,insmod option]
bttv0: gpio config override: mask=0x108007, mux=0x21,0x20,0x23,0x23,0x29
tuner 3-0060: All bytes are equal. It is not a TEA5767
tuner 3-0060: chip found @ 0xc0 (bt878 #0 [sw])
bttv0: using tuner=38
tuner 3-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
bttv0: registered device video0
bttv0: registered device vbi0

The lspci has:
01:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)

I ran the command aumix and unmuted the volume controls of all the ports (mic,line etc)

Also did the same thing with amixer...

Have I left out anything else?


Thanking You,
Divya