Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?
Notices
Welcome to
LinuxQuestions.org , a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free.
Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
Are you new to LinuxQuestions.org? Visit the following links:
Site Howto |
Site FAQ |
Sitemap |
Register Now
If you have any problems with the registration process or your account login, please
contact us . If you need to reset your password,
click here .
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a
virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month.
Click here for more info.
05-18-2012, 06:47 AM
#1
LQ Newbie
Registered: Oct 2010
Distribution: Debian
Posts: 15
Rep:
No audio on Debian Squeeze
Hi everyone.
I've tried to fix audio before, on another system, and found out it's quite hard and varies greatly from system to system. So I decided to don't try anything now to avoid screwing things up. I did some research though. Here's some data I collected, and the netbook's specs are on the signature:
Always up to date Debian Squeeze.
Kernel: 2.6.32-5-686.
lspci:
Code:
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 04)
01:00.1 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5288 (rev 01)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
git.alsa-project.org.sh (some script I found, also known as alsa-info.sh):
Code:
name=guir&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=
!!################################
!!ALSA Information Script v 0.4.60
!!################################
!!Script ran on: Thu May 10 11:19:55 UTC 2012
!!Linux Distribution
!!------------------
!!DMI Information
!!---------------
Manufacturer: Hewlett-Packard
Product Name: HP Mini 110-3100
Product Version: 058F110000202B00000300100
!!Kernel Information
!!------------------
Kernel release: 2.6.32-5-686
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: No
!!ALSA Version
!!------------
Driver version: 1.0.21
Library version: 1.0.23
Utilities version: 1.0.23
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0x94200000 irq 16
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 02)
Subsystem: 103c:148a
!!Modprobe options (Sound related)
!!--------------------------------
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-pcsp: index=-2
snd-usb-audio: index=-2
!!Loaded sound module options
!!--------------------------
!!Module: snd_hda_intel
-ne
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
-ne
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
-ne
enable_msi : 0
-ne
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
-ne
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
-ne
model : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
-ne
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
-ne
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-ne
power_save : 0
-ne
power_save_controller : Y
-ne
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
-ne
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
-ne
single_cmd : N
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: IDT ID 7667
Address: 0
Function Id: 0x1
Vendor Id: 0x111d7667
Subsystem Id: 0x103c148a
Revision Id: 0x100105
No Modem Function Group found
Default PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x03 0x03]
Pincap 0x0001173c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x02a19020: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221401f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00011734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x0d [Pin Complex] wcaps 0x400500: Mono
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 1
0x1a
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 3
0x13* 0x14 0x1c
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x90a60130: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 1
0x20
Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x0f 0x0f]
Power: setting=D0, actual=D0
Connection: 7
0x0c 0x0e 0x0f 0x1b* 0x11 0x12 0x0a
Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 7
0x0c* 0x0e 0x0f 0x1b 0x11 0x12 0x0a
Node 0x19 [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 3
0x13 0x14 0x1c*
Node 0x1a [Audio Mixer] wcaps 0x200500: Mono
Power: setting=D0, actual=D0
Connection: 1
0x19
Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x1f 0x1f]
Power: setting=D0, actual=D0
Connection: 6
0x0c 0x0e 0x0f 0x13 0x14 0x0a
Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 1
0x1b
Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Power: setting=D0, actual=D0
Delay: 4 samples
Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1d
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000034: IN OUT Detect
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x21 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Power: setting=D0, actual=D0
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
05-18-2012, 06:48 AM
#2
LQ Newbie
Registered: Oct 2010
Distribution: Debian
Posts: 15
Original Poster
Rep:
dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable)
[ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved)
[ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable)
[ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect
[ 0.000000] 1 base 000000000 mask 0C0000000 write-back
[ 0.000000] 2 base 040000000 mask 0C0000000 write-back
[ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 375e5000 - 37fefbf0
[ 0.000000] Allocated new RAMDISK: 00100000 - 00b0abf0
[ 0.000000] Move RAMDISK from 00000000375e5000 - 0000000037fefbef to 00100000 - 00b0abef
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 7f589000 00040
[ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1154MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00014cd000 - 00014d3293] BRK ==> [00014cd000 - 00014d3293]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 0000b0abf0] NEW RAMDISK ==> [0000100000 - 0000b0abf0]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f43f
[ 0.000000] 0: 0x0007f5f7 -> 0x0007f600
[ 0.000000] On node 0 totalpages: 521191
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2309 pages used for memmap
[ 0.000000] HighMem zone: 292677 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u1048576
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517114
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=d1180468-0694-423f-b42a-2288779bd5b2 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007f600)
[ 0.000000] Memory: 2050964k/2086912k available (2506k kernel code, 32644k reserved, 1326k data, 380k init, 1179944k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272b8b - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272b8b (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.634 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.26 BogoMIPS (lpj=6650536)
[ 0.004042] Security Framework initialized
[ 0.004050] SELinux: Disabled at boot.
[ 0.004064] Mount-cache hash table entries: 512
[ 0.004267] Initializing cgroup subsys ns
[ 0.004275] Initializing cgroup subsys cpuacct
[ 0.008015] Initializing cgroup subsys devices
[ 0.008020] Initializing cgroup subsys freezer
[ 0.008025] Initializing cgroup subsys net_cls
[ 0.008062] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008068] CPU: L2 cache: 512K
[ 0.008072] CPU: Physical Processor ID: 0
[ 0.008076] CPU: Processor Core ID: 0
[ 0.008083] mce: CPU supports 5 MCE banks
[ 0.008095] CPU0: Thermal monitoring handled by SMI
[ 0.008101] using mwait in idle threads.
[ 0.008111] Performance Events: Atom events, Intel PMU driver.
[ 0.008121] ... version: 3
[ 0.008125] ... bit width: 40
[ 0.008129] ... generic registers: 2
[ 0.008133] ... value mask: 000000ffffffffff
[ 0.008137] ... max period: 000000007fffffff
[ 0.008142] ... fixed-purpose events: 3
[ 0.008145] ... event mask: 0000000700000003
[ 0.008152] Checking 'hlt' instruction... OK.
[ 0.025586] ACPI: Core revision 20090903
[ 0.044102] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084918] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.172099] CPU1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.172115] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176078] Brought up 2 CPUs
[ 0.176085] Total of 2 processors activated (6650.57 BogoMIPS).
[ 0.176461] CPU0 attaching sched-domain:
[ 0.176469] domain 0: span 0-1 level SIBLING
[ 0.176474] groups: group c280370c cpus 0 (cpu_power = 589) group c290370c cpus 1 (cpu_power = 589)
[ 0.176489] domain 1: span 0-1 level MC
[ 0.176494] groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[ 0.176505] CPU1 attaching sched-domain:
[ 0.176510] domain 0: span 0-1 level SIBLING
[ 0.176514] groups: group c290370c cpus 1 (cpu_power = 589) group c280370c cpus 0 (cpu_power = 589)
[ 0.176527] domain 1: span 0-1 level MC
[ 0.176532] groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[ 0.176689] devtmpfs: initialized
[ 0.176689] regulator: core version 0.5
[ 0.176689] NET: Registered protocol family 16
[ 0.176689] ACPI: bus type pci registered
[ 0.176689] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.176689] PCI: MCFG area at e0000000 reserved in E820
[ 0.176689] PCI: Using MMCONFIG for extended config space
[ 0.176689] PCI: Using configuration type 1 for base access
[ 0.177112] bio: create slab <bio-0> at 0
[ 0.181046] ACPI: EC: Look up EC in DSDT
[ 0.184271] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.188101] ACPI: BIOS _OSI(Linux) query ignored
[ 0.992591] ACPI: Interpreter enabled
[ 0.992601] ACPI: (supports S0 S3 S4 S5)
[ 0.992662] ACPI: Using IOAPIC for interrupt routing
[ 1.007447] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 1.007588] ACPI: Power Resource [FN00] (on)
[ 1.008112] ACPI: No dock devices found.
[ 1.009325] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[ 1.009344] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.009475] pci 0000:00:02.0: reg 10 32bit mmio: [0x94180000-0x941fffff]
[ 1.009484] pci 0000:00:02.0: reg 14 io port: [0x30c0-0x30c7]
[ 1.009493] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x80000000-0x8fffffff]
[ 1.009501] pci 0000:00:02.0: reg 1c 32bit mmio: [0x94000000-0x940fffff]
[ 1.009552] pci 0000:00:02.1: reg 10 32bit mmio: [0x94100000-0x9417ffff]
[ 1.009678] pci 0000:00:1b.0: reg 10 64bit mmio: [0x94200000-0x94203fff]
[ 1.009764] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.009773] pci 0000:00:1b.0: PME# disabled
[ 1.009893] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.009901] pci 0000:00:1c.0: PME# disabled
[ 1.010023] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.010031] pci 0000:00:1c.1: PME# disabled
[ 1.010108] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[ 1.010187] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 1.010261] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 1.010337] pci 0000:00:1d.3: reg 20 io port: [0x3020-0x303f]
[ 1.010421] pci 0000:00:1d.7: reg 10 32bit mmio: [0x94204400-0x942047ff]
[ 1.010508] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.010516] pci 0000:00:1d.7: PME# disabled
[ 1.010789] pci 0000:00:1f.2: reg 10 io port: [0x30b8-0x30bf]
[ 1.010801] pci 0000:00:1f.2: reg 14 io port: [0x30cc-0x30cf]
[ 1.010812] pci 0000:00:1f.2: reg 18 io port: [0x30b0-0x30b7]
[ 1.010823] pci 0000:00:1f.2: reg 1c io port: [0x30c8-0x30cb]
[ 1.010835] pci 0000:00:1f.2: reg 20 io port: [0x30a0-0x30af]
[ 1.010847] pci 0000:00:1f.2: reg 24 32bit mmio: [0x94204000-0x942043ff]
[ 1.010899] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.010905] pci 0000:00:1f.2: PME# disabled
[ 1.010974] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[ 1.011190] pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
[ 1.011271] pci 0000:01:00.0: reg 18 64bit mmio pref: [0x90004000-0x90004fff]
[ 1.011322] pci 0000:01:00.0: reg 20 64bit mmio pref: [0x90000000-0x90003fff]
[ 1.011604] pci 0000:01:00.0: supports D1 D2
[ 1.011609] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.011626] pci 0000:01:00.0: PME# disabled
[ 1.011885] pci 0000:01:00.1: reg 10 32bit mmio: [0x93000000-0x9300ffff]
[ 1.012304] pci 0000:01:00.1: supports D1 D2
[ 1.012309] pci 0000:01:00.1: PME# supported from D1 D2 D3hot D3cold
[ 1.012325] pci 0000:01:00.1: PME# disabled
[ 1.013006] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 1.013015] pci 0000:00:1c.0: bridge 32bit mmio: [0x93000000-0x93ffffff]
[ 1.013026] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x90000000-0x90ffffff]
[ 1.013147] pci 0000:02:00.0: reg 10 64bit mmio: [0x92000000-0x92003fff]
[ 1.013340] pci 0000:02:00.0: supports D1 D2
[ 1.020168] pci 0000:00:1c.1: bridge io port: [0x1000-0x1fff]
[ 1.020177] pci 0000:00:1c.1: bridge 32bit mmio: [0x92000000-0x92ffffff]
[ 1.020191] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x91000000-0x91ffffff]
[ 1.020264] pci 0000:00:1e.0: transparent bridge
[ 1.020298] pci_bus 0000:00: on NUMA node 0
[ 1.020312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.020652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 1.020915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 1.021113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 1.021559] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[ 1.028098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.028360] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 1.028611] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.028862] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.029113] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.029366] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.029619] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.029876] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.030100] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.030120] vgaarb: loaded
[ 1.030159] PCI: Using ACPI for IRQ routing
[ 1.030159] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.030159] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.030159] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.036029] Switching to clocksource tsc
[ 1.038131] pnp: PnP ACPI init
[ 1.038163] ACPI: bus type pnp registered
[ 1.042374] pnp: PnP ACPI: found 9 devices
[ 1.042380] ACPI: ACPI bus type pnp unregistered
[ 1.042387] PnPBIOS: Disabled by ACPI PNP
[ 1.042409] system 00:01: ioport range 0x600-0x60f has been reserved
[ 1.042417] system 00:01: ioport range 0x610-0x610 has been reserved
[ 1.042423] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.042430] system 00:01: ioport range 0x810-0x817 has been reserved
[ 1.042437] system 00:01: ioport range 0x400-0x47f has been reserved
[ 1.042444] system 00:01: ioport range 0x500-0x53f has been reserved
[ 1.042453] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.042461] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.042468] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 1.042476] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.042483] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.042491] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.042498] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.077531] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 1.077539] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 1.077548] pci 0000:00:1c.0: MEM window: 0x93000000-0x93ffffff
[ 1.077557] pci 0000:00:1c.0: PREFETCH window: 0x00000090000000-0x00000090ffffff
[ 1.077569] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 1.077575] pci 0000:00:1c.1: IO window: 0x1000-0x1fff
[ 1.077584] pci 0000:00:1c.1: MEM window: 0x92000000-0x92ffffff
[ 1.077592] pci 0000:00:1c.1: PREFETCH window: 0x00000091000000-0x00000091ffffff
[ 1.077604] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 1.077608] pci 0000:00:1e.0: IO window: disabled
[ 1.077616] pci 0000:00:1e.0: MEM window: disabled
[ 1.077623] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.077653] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.077663] pci 0000:00:1c.0: setting latency timer to 64
[ 1.077680] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.077689] pci 0000:00:1c.1: setting latency timer to 64
[ 1.077702] pci 0000:00:1e.0: setting latency timer to 64
[ 1.077711] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.077717] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 1.077723] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 1.077730] pci_bus 0000:01: resource 1 mem: [0x93000000-0x93ffffff]
[ 1.077736] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x90ffffff]
[ 1.077742] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 1.077748] pci_bus 0000:02: resource 1 mem: [0x92000000-0x92ffffff]
[ 1.077754] pci_bus 0000:02: resource 2 pref mem [0x91000000-0x91ffffff]
[ 1.077761] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 1.077766] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 1.077828] NET: Registered protocol family 2
[ 1.078006] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.078607] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.079530] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.079960] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.079965] TCP reno registered
[ 1.080192] NET: Registered protocol family 1
[ 1.080243] pci 0000:00:02.0: Boot video device
[ 1.080274] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.080298] pci 0000:00:1d.0: PCI INT A disabled
[ 1.080317] pci 0000:00:1d.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.080339] pci 0000:00:1d.1: PCI INT C disabled
[ 1.080352] pci 0000:00:1d.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.080374] pci 0000:00:1d.2: PCI INT B disabled
[ 1.080390] pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.080414] pci 0000:00:1d.3: PCI INT D disabled
[ 1.080431] pci 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.096029] pci 0000:00:1d.7: PCI INT A disabled
[ 1.096136] Unpacking initramfs...
[ 1.567598] Freeing initrd memory: 10282k freed
[ 1.575317] Simple Boot Flag at 0x44 set to 0x1
[ 1.575906] audit: initializing netlink socket (disabled)
[ 1.575928] type=2000 audit(1337327299.572:1): initialized
[ 1.581652] highmem bounce pool size: 64 pages
[ 1.581662] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.584798] VFS: Disk quotas dquot_6.5.2
[ 1.584914] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.585072] msgmni has been set to 1723
[ 1.585475] alg: No test for stdrng (krng)
[ 1.585589] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.585596] io scheduler noop registered
[ 1.585601] io scheduler anticipatory registered
[ 1.585605] io scheduler deadline registered
[ 1.585684] io scheduler cfq registered (default)
[ 1.585912] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 1.585929] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.586164] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 1.586179] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.586496] isapnp: Scanning for PnP cards...
[ 1.940221] isapnp: No Plug & Play device found
[ 1.943459] Linux agpgart interface v0.103
[ 1.943603] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 1.943860] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 1.956792] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 1.956927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.957596] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.963413] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.963430] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.963576] mice: PS/2 mouse device common for all mice
[ 1.963656] rtc_cmos 00:03: RTC can wake from S4
[ 1.963742] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.963780] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.963803] cpuidle: using governor ladder
[ 1.963808] cpuidle: using governor menu
[ 1.963817] No iBFT detected.
[ 1.964607] TCP cubic registered
[ 1.964929] NET: Registered protocol family 10
[ 1.966533] Mobile IPv6
[ 1.966540] NET: Registered protocol family 17
[ 1.966568] Using IPI No-Shortcut mode
[ 1.966732] PM: Resume from disk failed.
[ 1.966754] registered taskstats version 1
[ 1.967573] rtc_cmos 00:03: setting system clock to 2012-05-18 07:48:20 UTC (1337327300)
[ 1.967721] Initalizing network drop monitor service
[ 1.967768] Freeing unused kernel memory: 380k freed
[ 1.968089] Write protecting the kernel text: 2508k
[ 1.968131] Write protecting the kernel read-only data: 920k
05-18-2012, 06:50 AM
#3
LQ Newbie
Registered: Oct 2010
Distribution: Debian
Posts: 15
Original Poster
Rep:
rest of dmesg:
Code:
[ 2.000733] udev[56]: starting version 164
[ 2.089146] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.290474] SCSI subsystem initialized
[ 2.334862] usbcore: registered new interface driver usbfs
[ 2.334926] usbcore: registered new interface driver hub
[ 2.335042] usbcore: registered new device driver usb
[ 2.344366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.344447] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.344489] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.344499] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.344565] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.344632] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.344654] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.348537] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.348576] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400
[ 2.364035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.364096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.364105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.364113] usb usb1: Product: EHCI Host Controller
[ 2.364120] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 2.364127] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.364516] usb usb1: configuration #1 chosen from 1 choice
[ 2.364719] hub 1-0:1.0: USB hub found
[ 2.364745] hub 1-0:1.0: 8 ports detected
[ 2.409374] libata version 3.00 loaded.
[ 2.420565] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.420740] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.420806] r8169 0000:01:00.0: setting latency timer to 64
[ 2.420818] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[ 2.420899] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[ 2.422826] r8169 0000:01:00.0: eth0: RTL8101e at 0xf7f84000, 78:ac:c0:ff:93:d7, XID 04000000 IRQ 26
[ 2.432878] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.432974] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.432998] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.433007] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.433162] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.433239] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 2.433344] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.433352] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.433360] usb usb2: Product: UHCI Host Controller
[ 2.433366] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.433372] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.433766] usb usb2: configuration #1 chosen from 1 choice
[ 2.433972] hub 2-0:1.0: USB hub found
[ 2.433998] hub 2-0:1.0: 2 ports detected
[ 2.434141] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.434162] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.434171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.434195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.434257] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
[ 2.434355] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.434364] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.434371] usb usb3: Product: UHCI Host Controller
[ 2.434378] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.434385] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.434731] usb usb3: configuration #1 chosen from 1 choice
[ 2.435149] hub 3-0:1.0: USB hub found
[ 2.435175] hub 3-0:1.0: 2 ports detected
[ 2.435319] uhci_hcd 0000:00:1d.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.435340] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.435348] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.435373] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.435435] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040
[ 2.435535] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.435544] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.435552] usb usb4: Product: UHCI Host Controller
[ 2.435559] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.435566] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.435910] usb usb4: configuration #1 chosen from 1 choice
[ 2.436137] hub 4-0:1.0: USB hub found
[ 2.436165] hub 4-0:1.0: 2 ports detected
[ 2.436303] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.436324] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.436332] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.436357] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.436419] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020
[ 2.436516] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.436524] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.436532] usb usb5: Product: UHCI Host Controller
[ 2.436539] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.436546] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.436904] usb usb5: configuration #1 chosen from 1 choice
[ 2.437102] hub 5-0:1.0: USB hub found
[ 2.437126] hub 5-0:1.0: 2 ports detected
[ 2.452084] ahci 0000:00:1f.2: version 3.0
[ 2.452122] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.452369] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 2.452457] ahci: SSS flag set, parallel bus scan disabled
[ 2.452545] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.452558] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 2.452571] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.453203] ACPI Warning for \_TZ_.THRM._AL0: Return Package has no elements (empty) (20090903/nspredef-433)
[ 2.453224] ACPI: [Package] has zero elements (f6cabd60)
[ 2.453309] ACPI: Invalid active0 threshold
[ 2.455830] scsi0 : ahci
[ 2.457315] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.457342] ACPI: Thermal Zone [THRM] (15 C)
[ 2.461421] scsi1 : ahci
[ 2.465468] scsi2 : ahci
[ 2.470626] scsi3 : ahci
[ 2.471213] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 27
[ 2.471222] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 27
[ 2.471227] ata3: DUMMY
[ 2.471231] ata4: DUMMY
[ 2.788545] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 2.951902] usb 1-8: New USB device found, idVendor=1fea, idProduct=0047
[ 2.951909] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.951915] usb 1-8: Product: HP Webcam
[ 2.951919] usb 1-8: Manufacturer: Alcor Micro, Corp.
[ 2.952103] usb 1-8: configuration #1 chosen from 1 choice
[ 2.952159] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.953411] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 2.953439] ata1.00: _GTF unexpected object type 0x1
[ 2.989117] ata1.00: ATA-8: WDC WD1600BEVT-22A23T0, 01.01A01, max UDMA/133
[ 2.989126] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.990665] ata1.00: _GTF unexpected object type 0x1
[ 2.990975] ata1.00: configured for UDMA/133
[ 3.004730] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 01.0 PQ: 0 ANSI: 5
[ 3.192521] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 3.324032] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.355662] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.356078] sd 0:0:0:0: [sda] Write Protect is off
[ 3.356089] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.356176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.356579] sda:
[ 3.372370] usb 3-2: New USB device found, idVendor=0a5c, idProduct=21b4
[ 3.372377] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.372383] usb 3-2: Product: Broadcom 2070 Bluetooth
[ 3.372388] usb 3-2: Manufacturer: Broadcom Corp
[ 3.372392] usb 3-2: SerialNumber: E02A82028C92
[ 3.372562] usb 3-2: configuration #1 chosen from 1 choice
[ 3.396608] sda1 sda2 sda3 < sda5 sda6 >
[ 3.422088] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.195397] Btrfs loaded
[ 4.290870] PM: Starting manual resume from disk
[ 4.290879] PM: Resume from partition 8:5
[ 4.290882] PM: Checking hibernation image.
[ 4.291088] PM: Error -22 checking image file
[ 4.291092] PM: Resume from disk failed.
[ 4.350220] kjournald starting. Commit interval 5 seconds
[ 4.350242] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.047020] udev[357]: starting version 164
[ 6.483770] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 6.483797] ACPI: Power Button [PWRB]
[ 6.484006] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 6.490556] ACPI: Lid Switch [LID0]
[ 6.490807] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.490823] ACPI: Power Button [PWRF]
[ 6.744070] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 6.745227] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 6.753351] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.779452] Marking TSC unstable due to TSC halts in idle
[ 6.779740] processor LNXCPU:00: registered as cooling_device0
[ 6.792256] Switching to clocksource hpet
[ 6.794770] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 6.795588] ACPI: WMI: Mapper loaded
[ 6.802289] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 6.804429] ACPI: AC Adapter [AC] (off-line)
[ 6.809515] processor LNXCPU:01: registered as cooling_device1
[ 7.170916] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.311257] ACPI: Battery Slot [BAT0] (battery present)
[ 7.568995] Bluetooth: Core ver 2.15
[ 7.569133] NET: Registered protocol family 31
[ 7.569139] Bluetooth: HCI device and connection manager initialized
[ 7.569146] Bluetooth: HCI socket layer initialized
[ 7.633680] cfg80211: Using static regulatory domain info
[ 7.633688] cfg80211: Regulatory domain: US
[ 7.633694] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.633703] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.633712] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.633721] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.633729] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.633738] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.633747] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.633769] cfg80211: Calling CRDA for country: US
[ 7.765422] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.766185] usbcore: registered new interface driver btusb
[ 7.798511] brcm80211: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.816469] brcm80211 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.816487] brcm80211 0000:02:00.0: setting latency timer to 64
[ 7.816566] brcm80211 0000:02:00.0: firmware: requesting brcm/bcm43xx-0.fw
[ 7.894258] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000/0xa0400
[ 7.939269] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 7.964272] Linux video capture interface: v2.00
[ 8.437425] brcm80211 0000:02:00.0: firmware: requesting brcm/bcm43xx_hdr-0.fw
[ 8.496593] [drm] Initialized drm 1.1.0 20060810
[ 8.507328] uvcvideo: Found UVC 1.00 device HP Webcam (1fea:0047)
[ 8.510822] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input6
[ 8.510982] usbcore: registered new interface driver uvcvideo
[ 8.510992] USB Video Class driver (v0.1.0)
[ 8.523067] Found chip type AI (0x13814313)
[ 8.527483] Changing max_res_mask to 0xffff
[ 8.527491] Changing min_res_mask to 0x200d
[ 8.533589] Applying 4313 WARs
[ 8.534742] wlc_bmac_attach:: deviceid 0x4727 nbands 1 board 0x1483 macaddr: 70:f3:95:b8:f2:38
[ 8.832587] i915 0000:00:02.0: power state changed by ACPI to D0
[ 8.832619] i915 0000:00:02.0: power state changed by ACPI to D0
[ 8.832635] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.832645] i915 0000:00:02.0: setting latency timer to 64
[ 8.848173] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 8.848189] [drm] set up 7M of stolen space
[ 8.881132] phy0: Selected rate control algorithm 'minstrel'
[ 8.882885] wl_set_hint: Sending country code US to MAC80211
[ 8.882900] wl0: Broadcom BCM43xx 802.11 MAC80211 Driver 5.75.11 (1.82.8.0) (Compiled in . at 03:54:06 on May 6 2012)
[ 8.883403] cfg80211: Calling CRDA for country: US
[ 8.952834] [drm] initialized overlay support
[ 9.432558] [drm] Big FIFO is enabled
[ 9.432580] [drm] Big FIFO is enabled
[ 9.704484] Console: switching to colour frame buffer device 128x37
[ 9.712117] fb0: inteldrmfb frame buffer device
[ 9.712122] registered panic notifier
[ 9.720521] acpi device:20: registered as cooling_device2
[ 9.723369] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 9.723656] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 9.724341] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.724424] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.724583] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.654266] Adding 5237148k swap on /dev/sda5. Priority:-1 extents:1 across:5237148k
[ 10.925601] EXT3 FS on sda2, internal journal
[ 11.053143] loop: module loaded
[ 12.372168] fuse init (API version 7.13)
[ 12.965272] r8169 0000:01:00.0: eth0: link down
[ 12.965811] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.655784] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 14.938566] apm: BIOS not found.
[ 15.640095] Bluetooth: L2CAP ver 2.14
[ 15.640102] Bluetooth: L2CAP socket layer initialized
[ 15.840349] Bluetooth: RFCOMM TTY layer initialized
[ 15.840361] Bluetooth: RFCOMM socket layer initialized
[ 15.840367] Bluetooth: RFCOMM ver 1.11
[ 15.846241] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.846249] Bluetooth: BNEP filters: protocol multicast
[ 16.077452] Bridge firewalling registered
[ 16.382024] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.382031] Bluetooth: SCO socket layer initialized
[ 16.822776] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.956595] lp: driver loaded but no devices found
[ 20.450871] ppdev: user-space parallel port driver
[ 33.773644] CPU0 attaching NULL sched-domain.
[ 33.773658] CPU1 attaching NULL sched-domain.
[ 33.796162] CPU0 attaching sched-domain:
[ 33.796172] domain 0: span 0-1 level SIBLING
[ 33.796180] groups: group c280370c cpus 0 (cpu_power = 589) group c290370c cpus 1 (cpu_power = 589)
[ 33.796201] domain 1: span 0-1 level MC
[ 33.796208] groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[ 33.796223] CPU1 attaching sched-domain:
[ 33.796230] domain 0: span 0-1 level SIBLING
[ 33.796237] groups: group c290370c cpus 1 (cpu_power = 589) group c280370c cpus 0 (cpu_power = 589)
[ 33.796255] domain 1: span 0-1 level MC
[ 33.796262] groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[ 55.899732] wlan0: direct probe to AP 00:1f:45:e4:6d:28 (try 1)
[ 55.908572] wlan0: direct probe responded
[ 55.908589] wlan0: authenticate with AP 00:1f:45:e4:6d:28 (try 1)
[ 55.911008] wlan0: authenticated
[ 55.911088] wlan0: associate with AP 00:1f:45:e4:6d:28 (try 1)
[ 55.914019] wlan0: RX AssocResp from 00:1f:45:e4:6d:28 (capab=0x401 status=0 aid=1)
[ 55.914036] wlan0: associated
[ 55.916749] Associated: True
[ 55.918619] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 55.918954] cfg80211: Calling CRDA for country: BR
[ 65.924031] wlan0: no IPv6 routers present
[ 71.727907] Associated: False
[ 71.736069] wlan0: deauthenticating from 00:1f:45:e4:6d:28 by local choice (reason=3)
[ 71.736218] wlan0: direct probe to AP 00:1f:45:e4:7a:d8 (try 1)
[ 71.743632] wlan0: direct probe responded
[ 71.743644] wlan0: authenticate with AP 00:1f:45:e4:7a:d8 (try 1)
[ 71.750323] wlan0: authenticated
[ 71.752613] wlan0: associate with AP 00:1f:45:e4:7a:d8 (try 1)
[ 71.757001] wlan0: RX AssocResp from 00:1f:45:e4:7a:d8 (capab=0x401 status=0 aid=3)
[ 71.757011] wlan0: associated
[ 71.758515] Associated: True
[ 104.790610] [drm] Big FIFO is enabled
[ 171.719805] Associated: False
[ 171.728136] wlan0: deauthenticating from 00:1f:45:e4:7a:d8 by local choice (reason=3)
[ 171.728341] wlan0: direct probe to AP 00:1f:45:e4:75:18 (try 1)
[ 171.928129] wlan0: direct probe to AP 00:1f:45:e4:75:18 (try 2)
[ 172.128135] wlan0: direct probe to AP 00:1f:45:e4:75:18 (try 3)
[ 172.132719] wlan0: direct probe responded
[ 172.132731] wlan0: authenticate with AP 00:1f:45:e4:75:18 (try 1)
[ 172.136963] wlan0: authenticated
[ 172.137042] wlan0: associate with AP 00:1f:45:e4:75:18 (try 1)
[ 172.140262] wlan0: RX AssocResp from 00:1f:45:e4:75:18 (capab=0x421 status=0 aid=5)
[ 172.140276] wlan0: associated
[ 172.144037] Associated: True
[ 181.175726] CPU0 attaching NULL sched-domain.
[ 181.175739] CPU1 attaching NULL sched-domain.
[ 181.200696] CPU0 attaching sched-domain:
[ 181.200706] domain 0: span 0-1 level SIBLING
[ 181.200714] groups: group c280370c cpus 0 (cpu_power = 589) group c290370c cpus 1 (cpu_power = 589)
[ 181.200736] domain 1: span 0-1 level MC
[ 181.200743] groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[ 181.200760] CPU1 attaching sched-domain:
[ 181.200767] domain 0: span 0-1 level SIBLING
[ 181.200775] groups: group c290370c cpus 1 (cpu_power = 589) group c280370c cpus 0 (cpu_power = 589)
[ 181.200795] domain 1: span 0-1 level MC
[ 181.200803] groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[ 193.156448] [drm] Big FIFO is enabled
[ 193.156466] [drm] Big FIFO is enabled
[ 193.156661] [drm] Big FIFO is enabled
[ 193.200935] [drm] Big FIFO is enabled
[ 367.459663] ACPI: EC: GPE storm detected, transactions will use polling mode
Obviously works on Windows.
All times are GMT -5. The time now is 01:00 AM .
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know .
Latest Threads
LQ News