Kilometric syslog and dmesg with a external hard drive WD "My Book Essential"

ndarkduck · 06-10-2010, 01:09 PM

Hi! Since i got a hard drive western digital (Bus 002 Device 005: ID 1058:1110 Western Digital Technologies, Inc. ) its giving this messages... is the hard drive broken? or something else?

Code:

Jun 10 13:00:06 GUNGNER kernel: [187802.961279] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
Jun 10 13:00:06 GUNGNER kernel: [187802.961565] usb-storage: Status code 0; transferred 8192/8192
Jun 10 13:00:06 GUNGNER kernel: [187802.961566] usb-storage: -- transfer complete
Jun 10 13:00:06 GUNGNER kernel: [187802.961567] usb-storage: Bulk data transfer result 0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.961568] usb-storage: Attempting to get CSW...
Jun 10 13:00:06 GUNGNER kernel: [187802.961569] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jun 10 13:00:06 GUNGNER kernel: [187802.961691] usb-storage: Status code 0; transferred 13/13
Jun 10 13:00:06 GUNGNER kernel: [187802.961692] usb-storage: -- transfer complete
Jun 10 13:00:06 GUNGNER kernel: [187802.961693] usb-storage: Bulk status result = 0
Jun 10 13:00:06 GUNGNER kernel: [187802.961694] usb-storage: Bulk Status S 0x53425355 T 0x26973 R 0 Stat 0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.961696] usb-storage: scsi cmd done, result=0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.961697] usb-storage: *** thread sleeping.
Jun 10 13:00:06 GUNGNER kernel: [187802.961705] usb-storage: queuecommand called
Jun 10 13:00:06 GUNGNER kernel: [187802.961709] usb-storage: *** thread awakened.
Jun 10 13:00:06 GUNGNER kernel: [187802.961710] usb-storage: Command READ_10 (10 bytes)
Jun 10 13:00:06 GUNGNER kernel: [187802.961711] usb-storage:  28 00 76 3b e1 f3 00 00 f0 00
Jun 10 13:00:06 GUNGNER kernel: [187802.961715] usb-storage: Bulk Command S 0x43425355 T 0x26974 L 122880 F 128 Trg 0 LUN 0 CL 10
Jun 10 13:00:06 GUNGNER kernel: [187802.961716] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jun 10 13:00:06 GUNGNER kernel: [187802.961773] usb-storage: Status code 0; transferred 31/31
Jun 10 13:00:06 GUNGNER kernel: [187802.961774] usb-storage: -- transfer complete
Jun 10 13:00:06 GUNGNER kernel: [187802.961774] usb-storage: Bulk command transfer result=0
Jun 10 13:00:06 GUNGNER kernel: [187802.961776] usb-storage: usb_stor_bulk_transfer_sglist: xfer 122880 bytes, 30 entries
Jun 10 13:00:06 GUNGNER kernel: [187802.964946] usb-storage: Status code 0; transferred 122880/122880
Jun 10 13:00:06 GUNGNER kernel: [187802.964947] usb-storage: -- transfer complete
Jun 10 13:00:06 GUNGNER kernel: [187802.964948] usb-storage: Bulk data transfer result 0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.964949] usb-storage: Attempting to get CSW...
Jun 10 13:00:06 GUNGNER kernel: [187802.964950] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jun 10 13:00:06 GUNGNER kernel: [187802.965082] usb-storage: Status code 0; transferred 13/13
Jun 10 13:00:06 GUNGNER kernel: [187802.965084] usb-storage: -- transfer complete
Jun 10 13:00:06 GUNGNER kernel: [187802.965085] usb-storage: Bulk status result = 0
Jun 10 13:00:06 GUNGNER kernel: [187802.965087] usb-storage: Bulk Status S 0x53425355 T 0x26974 R 0 Stat 0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.965089] usb-storage: scsi cmd done, result=0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.965091] usb-storage: *** thread sleeping.
Jun 10 13:00:06 GUNGNER kernel: [187802.965124] usb-storage: queuecommand called
Jun 10 13:00:06 GUNGNER kernel: [187802.965129] usb-storage: *** thread awakened.
Jun 10 13:00:06 GUNGNER kernel: [187802.965130] usb-storage: Command READ_10 (10 bytes)
Jun 10 13:00:06 GUNGNER kernel: [187802.965132] usb-storage:  28 00 76 3b e2 e3 00 00 10 00
Jun 10 13:00:06 GUNGNER kernel: [187802.965137] usb-storage: Bulk Command S 0x43425355 T 0x26975 L 8192 F 128 Trg 0 LUN 0 CL 10
Jun 10 13:00:06 GUNGNER kernel: [187802.965139] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jun 10 13:00:06 GUNGNER kernel: [187802.965300] usb-storage: Status code 0; transferred 31/31
Jun 10 13:00:06 GUNGNER kernel: [187802.965301] usb-storage: -- transfer complete
Jun 10 13:00:06 GUNGNER kernel: [187802.965302] usb-storage: Bulk command transfer result=0
Jun 10 13:00:06 GUNGNER kernel: [187802.965304] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
Jun 10 13:00:06 GUNGNER kernel: [187802.965669] usb-storage: Status code 0; transferred 8192/8192
Jun 10 13:00:06 GUNGNER kernel: [187802.965670] usb-storage: -- transfer complete
Jun 10 13:00:06 GUNGNER kernel: [187802.965672] usb-storage: Bulk data transfer result 0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.965673] usb-storage: Attempting to get CSW...
Jun 10 13:00:06 GUNGNER kernel: [187802.965674] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jun 10 13:00:06 GUNGNER kernel: [187802.965761] usb-storage: Status code 0; transferred 13/13
Jun 10 13:00:06 GUNGNER kernel: [187802.965762] usb-storage: -- transfer complete
Jun 10 13:00:06 GUNGNER kernel: [187802.965763] usb-storage: Bulk status result = 0
Jun 10 13:00:06 GUNGNER kernel: [187802.965765] usb-storage: Bulk Status S 0x53425355 T 0x26975 R 0 Stat 0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.965767] usb-storage: scsi cmd done, result=0x0
Jun 10 13:00:06 GUNGNER kernel: [187802.965769] usb-storage: *** thread sleeping.

And like the song: and so, and so and so

business_kid · 06-12-2010, 03:06 AM

Seems like you have some class of super huge debugging output enabled. This sort of thing is built in by programmers for them to see what's broken, but it usually never gets out. If it's all Status Code 0 and it annoys you, try and switch it off. The messages you post seem harmless.
Did you compile a driver ./configure --enable-debug, or set usb debugging in your kernel?