Slackware 10.0 2.4.26
Aps tried:
xawtv
mplayer
zapping
I'm having this exact same problem. I have great video, but no sound. I have tried the suggestions in
this thread. Here is my dmesg output:
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
saa7130/34: v4l2 driver version 0.2.12 loaded
PCI: Found IRQ 9 for device 02:0a.0
saa7133[0]: found at 02:0a.0, rev: 16, irq: 9, latency: 32, mmio: 0xf1000000
saa7133[0]: subsystem: 185b:c100, board: Compro VideoMate TV [card=19,autodetected]
saa7133[0]: board init: gpio is cc000c
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: dsp access wait timeout [bit=WRR]
i2c-core.o: adapter saa7133[0] registered as adapter 0.
saa7133[0]: i2c eeprom 00: 5b 18 00 c1 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc0
tuner: type set to 17 (Philips NTSC_M (MK2))
i2c-core.o: client [Philips NTSC_M (MK2)] registered to adapter [saa7133[0]](pos. 0).
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
Now I see "saa7133[0]: dsp access wait timeout [bit=WRR]" which I'm sure is causing the problem, but haven't been able to find a way to fix it. Sound works great everywhere else. Double-checked all volume controls and my soundcard seems to be working fine. It's just getting the audio on the tuner card to work seems to be the issue.