firewire drives not all recognized
I've recently switched from using 2 PCI IDE cards for
an 8 hard disk RAID, to using an external enclosure
with 4 Oxford Semiconductor IDE-Firewire bridge cards.
This connects to my computer now at the PCI Firewire
card it has. It is all hooked up correctly with master
slave settings and windows sees the drives without a
problem (sad isn't it?). Once I boot into to Linux, however, only the
master drives are seen on each brdge card. I can see
all 4 cards and the 4 master drives, but the 4 slave
drives will not be detected. Is there an argument i
need to pass to the modules when they are loaded? I
have looked all over and cannot find any information on
this.
Red Hat Enterprise Linux 3.0 fully updated
kernel: 2.4.21-15.0.2ELsmp
ieee1394:
libraw1394: libraw1394-0.10.1
ohci1394
dmesg:
ohci1394: $Rev: 896 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[16]
MMIO=[d8004000-d80047ff] Max Packet=[4096]
scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
blk: queue d12b9018, I/O limit 4095Mb (mask 0xffffffff)
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[00:1023]: Max speed [S800] - Max
payload [4096]
ieee1394: Device added: Node[00:1023]
GUID[00027a00000000cf] [Oxford Semiconductor Ltd.]
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[01:1023]: Max speed [S800] - Max
payload [4096]
ieee1394: Device added: Node[01:1023]
GUID[00027a01000000df] [Oxford Semiconductor Ltd.]
ieee1394: Host added: Node[02:1023]
GUID[00027a0d000004fb] [Linux OHCI-1394]
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[03:1023]: Max speed [S800] - Max
payload [4096]
ieee1394: Device added: Node[03:1023]
GUID[00027a03000000ff] [Oxford Semiconductor Ltd.]
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[04:1023]: Max speed [S800] - Max
payload [4096]
ieee1394: Device added: Node[04:1023]
GUID[00027a02000000ef] [Oxford Semiconductor Ltd.]
scsi singledevice 0 0 0 0
blk: queue d12b9818, I/O limit 4095Mb (mask 0xffffffff)
Vendor: IC35L080 Model: AVVA07-0 Rev: VA4O
Type: Direct-Access ANSI SCSI
revision: 06
blk: queue d12b9618, I/O limit 4095Mb (mask 0xffffffff)
scsi singledevice 0 0 1 0
Vendor: IC35L080 Model: AVVA07-0 Rev: VA4O
Type: Direct-Access ANSI SCSI
revision: 06
blk: queue d09ff218, I/O limit 4095Mb (mask 0xffffffff)
scsi singledevice 0 0 2 0
blk: queue d12b9a18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: IC35L080 Model: AVVA07-0 Rev: VA4O
Type: Direct-Access ANSI SCSI
revision: 06
blk: queue d12b9c18, I/O limit 4095Mb (mask 0xffffffff)
scsi singledevice 0 0 3 0
Vendor: IC35L080 Model: AVVA07-0 Rev: VA4O
Type: Direct-Access ANSI SCSI
revision: 06
blk: queue d0da3e18, I/O limit 4095Mb (mask 0xffffffff)
scsi singledevice 0 0 4 0
blk: queue d09ff218, I/O limit 4095Mb (mask 0xffffffff)
scsi singledevice 0 0 5 0
scsi singledevice 0 0 6 0
scsi singledevice 0 0 7 0
blk: queue d0da3e18, I/O limit 4095Mb (mask 0xffffffff)
output of /proc/bus/ieee1394/devices (if available):
Node[00:1023] GUID[00027a00000000cf]:
Vendor ID: `Oxford Semiconductor Ltd.' [0x00027a]
Capabilities: 0x0083c0
Bus Options:
IRMC(0) CMC(0) ISC(0) BMC(0) PMC(0) GEN(0)
LSPD(2) MAX_REC(64) CYC_CLK_ACC(255)
Unit Directory 0:
Vendor/Model ID: Oxford Semiconductor Ltd. [00027a]
/ OXFORD IDE Device [000000]
Software Specifier ID: 00609e
Software Version: 010483
Driver: SBP2 Driver
Length (in quads): 9
Node[01:1023] GUID[00027a01000000df]:
Vendor ID: `Oxford Semiconductor Ltd.' [0x00027a]
Capabilities: 0x0083c0
Bus Options:
IRMC(0) CMC(0) ISC(0) BMC(0) PMC(0) GEN(0)
LSPD(2) MAX_REC(64) CYC_CLK_ACC(255)
Unit Directory 0:
Vendor/Model ID: Oxford Semiconductor Ltd. [00027a]
/ OXFORD IDE Device [000000]
Software Specifier ID: 00609e
Software Version: 010483
Driver: SBP2 Driver
Length (in quads): 9
Node[02:1023] GUID[00027a0d000004fb]:
Vendor ID: `Linux OHCI-1394' [0x080028]
Capabilities: 0x0083c0
Bus Options:
IRMC(1) CMC(1) ISC(1) BMC(0) PMC(0) GEN(0)
LSPD(3) MAX_REC(4096) CYC_CLK_ACC(0)
Host Node Status:
Host Driver : ohci1394
Nodes connected : 5
Nodes active : 5
SelfIDs received: 5
Irm ID : [02:1023]
BusMgr ID : [63:1023]
In Bus Reset : no
Root : no
Cycle Master : no
IRM : yes
Bus Manager : no
Node[03:1023] GUID[00027a03000000ff]:
Vendor ID: `Oxford Semiconductor Ltd.' [0x00027a]
Capabilities: 0x0083c0
Bus Options:
IRMC(0) CMC(0) ISC(0) BMC(0) PMC(0) GEN(0)
LSPD(2) MAX_REC(64) CYC_CLK_ACC(255)
Unit Directory 0:
Vendor/Model ID: Oxford Semiconductor Ltd. [00027a]
/ OXFORD IDE Device [000000]
Software Specifier ID: 00609e
Software Version: 010483
Driver: SBP2 Driver
Length (in quads): 9
Node[04:1023] GUID[00027a02000000ef]:
Vendor ID: `Oxford Semiconductor Ltd.' [0x00027a]
Capabilities: 0x0083c0
Bus Options:
IRMC(0) CMC(0) ISC(0) BMC(0) PMC(0) GEN(0)
LSPD(2) MAX_REC(64) CYC_CLK_ACC(255)
Unit Directory 0:
Vendor/Model ID: Oxford Semiconductor Ltd. [00027a]
/ OXFORD IDE Device [000000]
Software Specifier ID: 00609e
Software Version: 010483
Driver: SBP2 Driver
Length (in quads): 9
PCI Firewire card: FWB-PCI01
(www .bare-bone .com/fwb-pci01/eindex.htm)
IDE Firewire bridge card(s): FWBU2-IDE02
(www .firewiremax .com/fi800sb20cot.html)
output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc.
VT82C693A/694x [Apollo PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc.
VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686
[Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
(rev 06)
00:07.2 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo
Super ACPI] (rev 40)
00:08.0 VGA compatible controller: Matrox Graphics,
Inc. MGA 2164W [Millennium II]
00:0b.0 FireWire (IEEE 1394): Texas Instruments
TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
00:0c.0 Ethernet controller: Digital Equipment
Corporation DECchip 21140 [FasterNet] (rev 22)
|
