DWL G510 Help please

it-s · 11-07-2004, 11:52 AM

Hi,

I was just wondering if anyone can help me here.

I am on Mandrake 10.1 (which is not that important cos it was the same on 10.0) and I have a problem with my wlan ethernet card which is D-Link G-510 with Marvel chipset. Just recently I have installed ndiswrapper 0.11 and I also tried 0.8, 0.9 and 0.10 with the same result. It all goes well until I do 'modprobe ndiswrapper' command does nothing and system log (dmesg) shows this:

Code:

ndiswrapper: request for irq 17 failed
ndiswrapper (NdisFreeSpinLock:886): incorrect lock cea848f2
ndiswrapper (NdisFreeSpinLock:886): incorrect lock cea8406f
ndiswrapper (NdisFreeSpinLock:886): incorrect lock cea85ae2
ndiswrapper (ndis_init_one_pci:1530): Windows driver couldn't initialize the device
mrv8k51xp: probe of 0000:00:09.0 failed with error -22
ndiswrapper: driver mrv8k51xp (D-Link,1/09/2004,2.3.0.1) added
ndiswrapper: request for irq 17 failed
ndiswrapper (NdisFreeSpinLock:886): incorrect lock c7a717a2
ndiswrapper (NdisFreeSpinLock:886): incorrect lock c7a7109f
ndiswrapper (NdisFreeSpinLock:886): incorrect lock c7a71f92
ndiswrapper (ndis_init_one_pci:1530): Windows driver couldn't initialize the device
mrv8ka51axp: probe of 0000:00:09.0 failed with error -22
ndiswrapper: driver mrv8ka51axp (Marvell,05/20/2004,2.3.0.19) added

the ndiswrapper 0.9 gave a similar message:

Code:

ndiswrapper version 0.9 loaded
ndiswrapper: driver mrv8k51.sys added
ndiswrapper (NdisFreeSpinLock:855): incorrect lock c3a34772
ndiswrapper (NdisFreeSpinLock:855): incorrect lock c3a3406f
ndiswrapper (NdisFreeSpinLock:855): incorrect lock c3a34f62
ndiswrapper (ndis_init_one:1299): Windows driver couldn't initialize the device
mrv8k51.sys: probe of 0000:00:09.0 failed with error -22

As you can see I am using seweral drivers ( D-Link oficial ones, ASUS ones, suggested on some forums, as well as Marvel ones (my card has Marvel chipset).

If anyone knows the rison for this error please help me. It's realy annoing to have to reboot computer into Windoz every time you need internet.

Thanks

it-s

it-s · 11-09-2004, 08:50 AM

So then, nobody knows what is the problem?

Ok, then, can anyone tell me at least what is that modprobe error -22 ? Or where could I find modprobe error code table?

May be the problem isn't ndiswrapper or hardware, but something is wrong with my PCI drivers?