While ripping CDs, my DVD burner locks up. I get error shown by dmesg, and until I reboot, the drive is useless. It seems to burn things fine. I'm using Fedora 8 with Kernel 2.6.25.11-60.fc8.

/sbin/lspci output:
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

dmesg error output:
sr0: CDROM not ready yet.
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd a0/01:00:00:80:dc/00:00:00:00:00/a0 tag 0 dma 56448 in
cdb be 00 00 00 03 f9 00 00 18 f8 00 00 00 00 00 00
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: port is slow to respond, please be patient (Status 0xd0)
ata2: device not ready (errno=-16), forcing hardreset
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x3)
ata2.00: revalidation failed (errno=-5)
ata2.00: disabled
ata2: soft resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: EH complete