Two Video cards, screen going black and sytem frozen
I have 2 ATI rage pro's, AGP and PCI.
I ran xfree86setup and XF86Config looks like it should work, (to me atleast) and X will run on both screens with just the "X -screen screen# ", but when I run GDM or startx both screens change resolutions and go black and the system freezes completely.
Her is my XF86Config file:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "type1"
Load "freetype"
Load "speedo"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "STC"
ModelName "eView17p"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CCEPIOMode" # [<bool>]
#Option "CCENoSecurity" # [<bool>]
#Option "CCEusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "Display" # <str>
#Option "PanelWidth" # <i>
#Option "PanelHeight" # <i>
#Option "ProgramFPRegs" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
#Option "ShowCache" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Rage 128 PF/PRO AGP 4x TMDS"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card1"
Driver "ati"
VendorName "ATI"
BoardName "3D Rage Pro 215GP"
ChipSet "ati"
ChipId 0x4750
ChipRev 0x5c
BusID "PCI:0:11:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
|