raid 1 from the start
I have read multiple guides on the web and still don't know how to do it.
I just need someone to tell me how to set up a raid 1 through the installation process of fc3
I have 2 scsi drives both 9 gig each.
I need a complete step by step with no assumptions.
What I have tried so far is
deleted all the partitions so all i have listed in the table is /dev/sda and /dev/sdb
I then gone to 'new' and set the file system to 'software raid' and checked 'fill to max allowable size' and selected in allowable drives 'sda'.
I then repeated this step and selected 'sdb' for allowable drives.
I next have clicked on 'raid' at the main screen setup and have 3 options
create a software raid partition
create a raid device [default=/dev/md0]
clone a drive to create a rraid device [default=/dev/md0]
I am assuming its the 2nd option but as from there I have no idea what to do, ie. what paritions to make and where to make them etc. if what I have done so far is right can anyone explain the rest of the steps or if it is wrong then please can you explain whatI need to do.
thanks
|