sarge and raidutils2
Hi,
My server used to run on woody before upgrading it to sarge a few months ago. Since then I had no problems with my raid array but after a reboot some of the volumes fell of the array and now I can't get them back. When this happend while running woody I would just do a raidhotremove and then a raidhotadd and the volume would resync itself into the array. I can't do that now because for some reason the raidutils2 package doesn't come with raidhotadd. I tried resyncing it with mdadm: mdadm -assemble and mdadm --assemble -f but it says the following:
mdadm: device /dev/md6 already active - cannot assemble it
Here is the output of /proc/mdstat:
Personalities : [raid1]
read_ahead 1024 sectors
md0 : inactive hdc3[1]
0 blocks
md14 : active raid1 hdc1[1] hda1[0]
15936 blocks [2/2] [UU]
md3 : active raid1 hda3[0]
68750080 blocks [2/1] [U_]
md5 : active raid1 hdc5[1] hda5[0]
1951744 blocks [2/2] [UU]
md6 : active raid1 hdc6[1](F) hda6[0]
1951744 blocks [2/1] [U_]
md7 : active raid1 hdc7[1] hda7[0]
1951744 blocks [2/2] [UU]
md8 : active raid1 hdc8[1] hda8[0]
4915776 blocks [2/2] [UU]
unused devices: <none>
Two of the volumes are working as 2/1 and I can't push them back. Help.
Last edited by ufo1900; 08-15-2005 at 06:47 AM.
|