Hello,
I'm not sure if this will answer your question. I use:
on AIX5.3 which gives me:
Code:
attribute value description user_settable
alias4 IPv4 Alias including Subnet Mask True
alias6 IPv6 Alias including Prefix Length True
arp on Address Resolution Protocol (ARP) True
authority Authorized Users True
broadcast Broadcast Address True
mtu 1500 Maximum IP Packet Size for This Device True
netaddr 10.1.1.2 Internet Address True
netaddr6 IPv6 Internet Address True
netmask 255.255.0.0 Subnet Mask True
prefixlen Prefix Length for IPv6 Internet Address True
remmtu 576 Maximum IP Packet Size for REMOTE Networks True
rfc1323 Enable/Disable TCP RFC 1323 Window Scaling True
security none Security Level True
state up Current Interface Status True
tcp_mssdflt Set TCP Maximum Segment Size True
tcp_nodelay Enable/Disable TCP_NODELAY Option True
tcp_recvspace Set Socket Buffer Space for Receiving True
tcp_sendspace Set Socket Buffer Space for Sending True
On this server IPv6 is active but not configured (only on loopback).
Code:
[root@srvi2dbd:/]ifconfig -a
en0: flags=1e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),LARGESEND,CHAIN>
inet 10.1.1.2 netmask 0xffff0000 broadcast 10.1.255.255
inet 172.25.2.37 netmask 0xffff0000 broadcast 172.25.255.255
inet 10.3.1.1 netmask 0xffff0000 broadcast 10.3.255.255
tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
en1: flags=1e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),LARGESEND,CHAIN>
inet 10.2.1.2 netmask 0xffff0000 broadcast 10.2.255.255
inet 10.4.1.1 netmask 0xffff0000 broadcast 10.4.255.255
inet 172.25.2.2 netmask 0xffff0000 broadcast 172.25.255.255
tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
inet6 ::1/0
tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
Hope this helps.
Kind regards,
Eric