I'm cannot enable desktop effect in ubuntu 7.10 \ intel GM965

abukhallad · 02-09-2008, 12:25 PM

Hello ...

I'm cannot enable desktop effect ... please look the picture..

http://a.alemran.googlepages.com/desktopeffect.png

xorg.conf >> Ubuntu 7.10

Code:

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"	"/dev/psaux"
	Option		"Protocol"	"auto-dev"
	Option		"HorizEdgeScroll"	"0"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
	Busid		"PCI:0:2:0"
	Driver		"intel"
        Option "DPMS"
        Option "XaaNoOffscreenPixmaps" "1"
        Option "UseFBDev"              "true"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Vendorname	"Generic LCD Display"
	Modelname	"LCD Panel 1280x1024"
	Horizsync	31.5-64.0
	Vertrefresh	56.0 - 65.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
	Gamma	1.0
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
	Monitor		"Generic Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	1280	1024
		Modes		"640x480@60"	"800x600@56"	"800x600@60"	"1024x768@60"	"1280x960@60"	"1280x1024@60"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen 0 "Default Screen" 0 0
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	
	# Uncomment if you have a wacom tablet
	#	InputDevice     "stylus"	"SendCoreEvents"
	#	InputDevice     "cursor"	"SendCoreEvents"
	#	InputDevice     "eraser"	"SendCoreEvents"
	Inputdevice	"Synaptics Touchpad"
EndSection
Section "Module"
	Load		"glx"
	Load		"GLcore"
	Load		"v4l"
EndSection
Section "ServerFlags"
EndSection

Section "Extensions"
    Option "Composite"
EndSection

But
in mandriva live CD it work compiz 100% ...

Mandriva 2008 KDE Live cd
xorg.conf

Code:



	Code:
	# File generated by XFdrake (rev 230776)

Section "Extensions"
    Option "Composite"
EndSection
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerFlags"
    #DontZap # disable <Ctrl><Alt><BS> (server abort)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx" # 3D layer
    Load "dri" # direct rendering
EndSection

Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/mouse"
EndSection

Section "InputDevice"
    Identifier "SynapticsMouse1"
    Driver "synaptics"
    Option "SHMConfig" "on"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Plug'n Play"
    
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
    
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection

Section "Device"
    Identifier "device1"
    VendorName "Intel Corporation"
    BoardName "Intel 810 and later"
    Driver "intel"
    Option "DPMS"
    Option "XaaNoOffscreenPixmaps" "1"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
EndSection

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "SynapticsMouse1" "AlwaysCore"
    Screen "screen1"
EndSection

Code:

abdallah@abdallah-laptop:~$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965GM 4.1.3002 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.0.1

Code:

abdallah@abdallah-laptop:~$ compiz --replace
Checking for Xgl: present. 
Checking for nVidia: not present. 
Checking for Xgl: present. 
Enabling Xgl with fglrx ATi drivers...
Starting gtk-window-decorator
/usr/bin/compiz.real (core) - Fatal: Support for non power of two textures missing
/usr/bin/compiz.real (core) - Error: Failed to manage screen: 0
/usr/bin/compiz.real (core) - Fatal: No manageable screens found on display :1.0
abdallah@abdallah-laptop:~$

Code:

abdallah@abdallah-laptop:~$ glxinfo | grep direct
Xlib:  extension "XFree86-DRI" missing on display ":1.0".
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
abdallah@abdallah-laptop:~$

[CODE]
abdallah@abdallah-laptop:~$ lshw -C video
WARNING: you should run this program as super-user.
*-display:0
description: VGA compatible controller
product: Mobile GM965/GL960 Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: vga bus_master cap_list
configuration: latency=0
*-display:1 UNCLAIMED
description: Display controller
product: Mobile GM965/GL960 Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 03
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
[/CODE

abukhallad · 02-09-2008, 12:25 PM

Code:

http://a.alemran.googlepages.com/desktopeffect.png

Mephisto · 02-09-2008, 02:57 PM

Have you updated to the current packages? There was a bug in the GM965 that had 7.10 blacklist the 965 till 24 Nov 2007. https://bugs.launchpad.net/xorg-server/+bug/111257

First I would note that you are not loading the dri module, try changing your modules section to as follows:

Code:

Section "Module"
	Load		"glx"
        Load            "dri"
	Load		"GLcore"
	Load		"v4l"
EndSection

and perhaps adding this at the bottom of your config. (try without first)

Code:

Section "DRI"
	Mode 0666
EndSection

Also I believe the option should be

Code:

   "Composite" "enable"

thogh looking through the man page for the option I did not see it.

Alas I stopped using compiz in favor of dual screen, but otherwise it looks right. The only other tweak you might add to the mix is changing your driver from "intel" to "i810". Since Mandriva worked with the attached xorg though I doubt that is the problem.