Upsmon Software
I installed the upsmon software on my PC, but I get this error message:
linux:/etc/upsmon # ./upsmon /dev/ttyS0 300
Copyright(c) Powercom Co., Ltd., all rights reserved.
UPSMON V0.91a program start!
UPSMON: The UPS serial port use /dev/ttyS0.
UPSMON: Ac Fail count down is seted 300 secs.
UPSMON: UPS shutdown delay time is seted 1 mins and 0 secs.
Check UPS type.....
UPSMON: UPS cann't fount!
UPSMON: Program stop!
UPSMON: Please check the UPS connection and restart the program.
linux:/etc/upsmon # ./upsmon /dev/ttyS1 300
Copyright(c) Powercom Co., Ltd., all rights reserved.
UPSMON V0.91a program start!
UPSMON: The UPS serial port use /dev/ttyS1.
UPSMON: Ac Fail count down is seted 300 secs.
UPSMON: UPS shutdown delay time is seted 1 mins and 0 secs.
Check UPS type.....
UPSMON: UPS cann't fount!
UPSMON: Program stop!
UPSMON: Please check the UPS connection and restart the program.
How do I connect to the ups, because when I am in Suse about 5 minutes the ups starts beeping. The only way I can stop this is if I shutdown the PC and pull out the connection cable and start the PC again.
Or, how can I turn UPS monitoring off completely?
Thanks in advance.
Last edited by pete138; 09-25-2005 at 10:31 AM.
|