LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
Reload this Page Net::SSLeay and Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
  Search this Thread
Old 03-02-2004, 05:41 PM   #1
kdepa
Member
 
Registered: Feb 2004
Posts: 73

Rep: Reputation: 15
Net::SSLeay and Slackware

Previously, I have been able to compile Net::SSLeay on Slackwaer 9.1 with no problems. Since my latest install, I have not been able to compile and install the software. I run the command:

./Makefile.PL

and it gives me this output:

Checking for OpenSSL-0.9.6g or newer...
You have OpenSSL-0.9.7b installed in /usr
That's is newer than what this module was tested with (0.9.6g). You should
consider checking if there is a newer release of this module
available. Everything will probably work OK, though.
*** Could not figure out which C compiler was used to compile /usr/bin/openssl. It is essentiall that OpenSSL, perl, and Net::SSLeay are compiled with the same compiler and flags. Mixing and matching compilers is not supported. at ./Makefile.PL line 132.
Checking if your kit is complete...
Looks good
Checking if your kit is complete...
Looks good
Writing Makefile for Net::SSLeay::Handle
Writing Makefile for Net::SSLeay

I've always had this output with no problem. When I do the next command, it is when I have the problem. I type in:

make install (anyone know why you don't have to do make first, then make install???)

cp ptrtstrun.pl blib/lib/Net/ptrtstrun.pl
cp SSLeay.pm blib/lib/Net/SSLeay.pm
AutoSplitting blib/lib/Net/SSLeay.pm (blib/lib/auto/Net/SSLeay)
blib/lib/Net/SSLeay.pm: some names are not unique when truncated to 8 characters:
directory blib/lib/auto/Net/SSLeay:
do_https3.al, do_https2.al, do_https4.al, do_https.al truncate to do_https
get_https.al, get_https3.al, get_https4.al truncate to get_http
head_https.al, head_https3.al, head_https4.al truncate to head_htt
post_https.al, post_https3.al, post_https4.al truncate to post_htt
put_https.al, put_https3.al, put_https4.al truncate to put_http
ssl_read_all.al, ssl_read_until.al, ssl_read_CRLF.al truncate to ssl_read
ssl_write_all.al, ssl_write_CRLF.al truncate to ssl_writ
make[1]: Entering directory `/home/kdepa/Net_SSLeay.pm-1.21/Net-SSLeay-Handle-0.50'
cp Handle.pm ../blib/lib/Net/SSLeay/Handle.pm
Manifying ../blib/man3/Net::SSLeay::Handle.3
make[1]: Leaving directory `/home/kdepa/Net_SSLeay.pm-1.21/Net-SSLeay-Handle-0.50'
/usr/bin/perl5.8.0 /usr/lib/perl5/5.8.0/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.8.0/ExtUtils/typemap -typemap typemap SSLeay.xs > SSLeay.xsc && mv SSLeay.xsc SSLeay.c
cc -c -I/usr/include -I/usr/inc32 -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.21\" -DXS_VERSION=\"1.21\" -fPIC "-I/usr/lib/perl5/5.8.0/i486-linux/CORE" -DPERL5 SSLeay.c
In file included from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:371:30: sys/types.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:402:19: ctype.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:414:23: locale.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:431:20: setjmp.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:437:26: sys/param.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:442:23: stdlib.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:447:23: unistd.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:479:23: string.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:612:27: netinet/in.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:616:26: arpa/inet.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:626:25: sys/stat.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:648:21: time.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:655:25: sys/time.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:662:27: sys/times.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:669:19: errno.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:681:25: sys/socket.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:708:21: netdb.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:781:30: sys/ioctl.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:810:23: dirent.h: No such file or directory
In file included from /usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/syslimits.h:7,
from /usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/limits.h:11,
from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:1137,
from SSLeay.xs:72:
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/limits.h:132:75: limits.h: No such file or directory
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:1713,
from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/handy.h:119:25: inttypes.h: No such file or directory
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:1877,
from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/unixish.h:106:21: signal.h: No such file or directory
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perlio.h:64,
from /usr/lib/perl5/5.8.0/i486-linux/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2200,
from SSLeay.xs:72:
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:37:23: features.h: No such file or directory
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:45:25: bits/types.h: No such file or directory
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perlio.h:64,
from /usr/lib/perl5/5.8.0/i486-linux/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2200,
from SSLeay.xs:72:
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:53: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:55: syntax error before "typedef"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:71: syntax error before "typedef"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:81:19: libio.h: No such file or directory
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:97: syntax error before "typedef"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:147:28: bits/stdio_lim.h: No such file or directory
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:151: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:161: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:161: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:163: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:167: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:170: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:170: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:180: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:207: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:209: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:209: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:211: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:225: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:228: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:229: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:233: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:280: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:283: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:283: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:288: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:302: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:304: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:305: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:307: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:310: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:314: syntax error before "_G_va_list"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:316: syntax error before "_G_va_list"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:320: syntax error before "_G_va_list"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:358: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:360: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:361: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:363: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:366: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:388: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:390: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:390: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:391: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:394: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:413: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:415: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:415: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:416: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:419: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:447: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:449: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:450: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:454: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:484: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:486: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:487: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:490: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:494: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:499: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:502: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:520: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:522: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:522: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:524: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:526: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:553: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:556: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:556: syntax error before "fpos_t"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:559: syntax error before '*' token
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:582: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:584: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:584: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:586: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:588: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:599: syntax error before "__BEGIN_NAMESPACE_STD"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:601: syntax error before "extern"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:601: syntax error before "__THROW"
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:608:30: bits/sys_errlist.h: No such file or directory
/usr/lib/gcc-lib/i486-slackware-linux/3.2.3/include/stdio.h:686: syntax error before "__END_DECLS"
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2200,
from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/perlio.h:98: syntax error before "typedef"
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2203,
from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/sv.h:383: syntax error before "DIR"
/usr/lib/perl5/5.8.0/i486-linux/CORE/sv.h:383: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.0/i486-linux/CORE/sv.h:383: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.0/i486-linux/CORE/sv.h:385: syntax error before '}' token
/usr/lib/perl5/5.8.0/i486-linux/CORE/sv.h:385: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/sv.h:399: syntax error before '}' token
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2211,
from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/av.h:12: syntax error before "ssize_t"
/usr/lib/perl5/5.8.0/i486-linux/CORE/av.h:12: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.0/i486-linux/CORE/av.h:13: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/av.h:22: syntax error before '}' token
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2214,
from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/scope.h:223: syntax error before "sigjmp_buf"
/usr/lib/perl5/5.8.0/i486-linux/CORE/scope.h:223: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.0/i486-linux/CORE/scope.h:230: syntax error before '}' token
In file included from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2386: syntax error before "getuid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2386: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2387: syntax error before "geteuid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2387: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2388: syntax error before "getgid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2388: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2389: syntax error before "getegid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2389: warning: data definition has no type or storage class
In file included from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2686:22: math.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2788: syntax error before "ruid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:2792: syntax error before "rgid"
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:3368,
from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:86: syntax error before "mode"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:246: syntax error before "off_t"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:248: syntax error before "Perl_do_sysseek"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:248: syntax error before "off_t"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:248: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:249: syntax error before "Perl_do_tell"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:249: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:334: syntax error before "testgid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:338: warning: `struct tm' declared inside parameter list
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:338: warning: its scope is only this definition or declaration, which is probably not what you want
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:491: warning: `struct tm' declared inside parameter list
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:506: syntax error before "Perl_my_fork"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:506: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:634: syntax error before "pid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:867: syntax error before "pid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1375: syntax error before "Perl_PerlIO_read"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1375: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1376: syntax error before "Perl_PerlIO_write"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1376: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1377: syntax error before "Perl_PerlIO_unread"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1377: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1378: syntax error before "Perl_PerlIO_tell"
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1378: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/proto.h:1379: syntax error before "off_t"
In file included from /usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:3391,
from SSLeay.xs:72:
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:64: syntax error before "PL_basetime"
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:64: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:235: syntax error before "PL_uid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:235: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:236: syntax error before "PL_euid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:236: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:237: syntax error before "PL_gid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:237: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:238: syntax error before "PL_egid"
/usr/lib/perl5/5.8.0/i486-linux/CORE/intrpvar.h:238: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:3926:24: sys/ipc.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:3927:24: sys/sem.h: No such file or directory
/usr/lib/perl5/5.8.0/i486-linux/CORE/perl.h:4040:24: sys/file.h: No such file or directory
In file included from SSLeay.xs:83:
/usr/include/openssl/err.h:64:20: stdlib.h: No such file or directory
In file included from /usr/include/openssl/bio.h:67,
from /usr/include/openssl/err.h:68,
from SSLeay.xs:83:
/usr/include/openssl/crypto.h:62:20: stdlib.h: No such file or directory
In file included from SSLeay.xs:83:
/usr/include/openssl/err.h:84:19: errno.h: No such file or directory
In file included from SSLeay.xs:85:
/usr/include/openssl/rand.h:62:20: stdlib.h: No such file or directory
In file included from SSLeay.xs:86:
/usr/include/openssl/buffer.h:67:23: sys/types.h: No such file or directory
In file included from /usr/include/openssl/rsa.h:62,
from /usr/include/openssl/evp.h:137,
from /usr/include/openssl/x509.h:67,
from /usr/include/openssl/ssl.h:177,
from SSLeay.xs:87:
/usr/include/openssl/asn1.h:62:18: time.h: No such file or directory
In file included from /usr/include/openssl/rsa.h:62,
from /usr/include/openssl/evp.h:137,
from /usr/include/openssl/x509.h:67,
from /usr/include/openssl/ssl.h:177,
from SSLeay.xs:87:
/usr/include/openssl/asn1.h:758: syntax error before "time_t"
/usr/include/openssl/asn1.h:760: syntax error before "time_t"
/usr/include/openssl/asn1.h:766: syntax error before "time_t"
/usr/include/openssl/asn1.h:795: syntax error before "time_t"
In file included from /usr/include/openssl/x509.h:537,
from /usr/include/openssl/ssl.h:177,
from SSLeay.xs:87:
/usr/include/openssl/x509_vfy.h:222: syntax error before "time_t"
/usr/include/openssl/x509_vfy.h:251: syntax error before '}' token
/usr/include/openssl/x509_vfy.h:399: syntax error before "time_t"
In file included from /usr/include/openssl/ssl.h:177,
from SSLeay.xs:87:
/usr/include/openssl/x509.h:820: syntax error before "time_t"
/usr/include/openssl/x509.h:822: syntax error before "time_t"
SSLeay.xs: In function `constant':
SSLeay.xs:1560: `EINVAL' undeclared (first use in this function)
SSLeay.xs:1560: (Each undeclared identifier is reported only once
SSLeay.xs:1560: for each function it appears in.)
SSLeay.xs:1564: `ENOENT' undeclared (first use in this function)
SSLeay.c: In function `XS_Net__SSLeay_state_string':
SSLeay.c:2597: warning: assignment discards qualifiers from pointer target type
SSLeay.c:2614: warning: assignment discards qualifiers from pointer target type
SSLeay.c: In function `XS_Net__SSLeay_state_string_long':
SSLeay.c:2631: warning: assignment discards qualifiers from pointer target type
SSLeay.c: In function `XS_Net__SSLeay_rstate_string_long':
SSLeay.c:2648: warning: assignment discards qualifiers from pointer target type
SSLeay.c: In function `XS_Net__SSLeay_alert_desc_string':
SSLeay.c:4565: warning: assignment discards qualifiers from pointer target type
SSLeay.c: In function `XS_Net__SSLeay_alert_desc_string_long':
SSLeay.c:4582: warning: assignment discards qualifiers from pointer target type
SSLeay.c: In function `XS_Net__SSLeay_alert_type_string':
SSLeay.c:4599: warning: assignment discards qualifiers from pointer target type
SSLeay.c: In function `XS_Net__SSLeay_alert_type_string_long':
SSLeay.c:4616: warning: assignment discards qualifiers from pointer target type
SSLeay.c:4865: confused by earlier errors, bailing out
make: *** [SSLeay.o] Error 1
 
Old 03-29-2007, 06:14 AM   #2
aryys
LQ Newbie
 
Registered: Mar 2006
Location: london, england
Distribution: Fedora 12, Mandriva 2010, FreeBSD 7.2, Slackware 13, OpenBSD 3.7
Posts: 29

Rep: Reputation: 16
Hi,

I don't know if its essential but i always pass it through

make && make install

that works fine for me on a default install of slack 10.2
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SSLeay on Trustix bford Linux - Software 0 03-05-2005 10:42 AM
How to configure Net in Slackware? kornerr Slackware 23 01-14-2005 05:45 PM
Net Send in slackware... phiberoptik Slackware 1 11-20-2004 12:35 PM
How Do I Connect To The Net With Slackware 9.0? tlcasey100 Slackware 1 10-14-2003 08:09 PM
Net:SSLeay and Redhat 8 Beelzebub Linux - Software 1 01-26-2003 01:46 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 09:12 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration