Bluetooth and Nokia 6230

synapse · 06-13-2005, 01:13 AM

Hi All

Has anyone been able to get gnokii working over bluetooth with a nokia 6230.
I cant get this to work.

I have the bluetooth software rfcomm hcitool etc - and this works fine as I can get the phone to dial out using minicom.

gnokii however doesnt seem to work.
Perhaps I have the wrong options configured in the gnokiirc file ?

Slackware 10.1

Thanx for the help (if any)
cheers.

Jana Kazakh · 06-27-2005, 07:21 AM

Hi, I'm here, also with Slack 10.1, a 6230, and gnokii

Here's my configuration file (/etc/gnokiirc):

***start***

[global]
port = 00:11:9F:5A:AD:F1
#Gnokii treats the 6230 as a 6510; similar, but not everything works on it.
model = 6510
initlength = default
connection = bluetooth
use_locking = no
serial_baudrate = 19200
rfcomm_channel = 1
smsc_timeout = 10

***end***

synapse · 06-27-2005, 07:34 AM

Hi

Thanx a lot for the reply. I dunno why but when i install gnokki i get no bluetooth support, so I found another program and that one works just fine.

Have you found any way to send a fax using your phone? It seems that that service is not available on the 6230. This is what i was trying to get at from the beginning all the rest is just stuff that im picking up on the way.

Thanx again for the reply

cheers

baconbits23 · 08-13-2005, 06:16 AM

Hello,
I have just configured my usb bluetooth on a dell inspiron 6000 and I cant get gnokii working.
I have got "sdptool browser" returning loads of services from the phone.
But whe I run gnokii I get this:

GNOKII Version 0.6.5
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
phone instance config:
model: 6510
port_device: 00:10:c6:91:bc:95
connection_type: 5
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 14
sm_retry: off
Connecting
Serial device: opening device 00:10:c6:91:bc:95
Can't connect: No route to host
Couldn't open PHONET device: No route to host
Error in link initialisation: 1
Telephone interface init failed: Command failed.
Quitting.
Serial device: closing device

any ideas how I sort this out ?

thanks

AEA · 12-29-2006, 03:31 PM

Hi, I'm facing the same problem(in Pardus but it doesn't matter)

In http://www.gnokii.org/faq.shtml#irda , they suggest using

Code:

pkot@bzzzt:~$ echo 115200 > /proc/sys/net/irda/max_baud_rate

for irda. We're using bluetooth. What can be done?
Does anyone know anything about it?
Thanks...

Code:

emre@192 ~ $ gnokii --identify
GNOKII Version 0.6.14
Can't connect: No route to host
Couldn't open PHONET device: No route to host
Telephone interface init failed: Command failed.
Quitting.
Command failed.
emre@192 ~ $

AEA · 01-02-2007, 11:45 AM

Hi,

I've found a solution in the IRC room of gnokii.

They told me that there's an mismatch of rfcomm ports. So that gnokii can't connect.

I changed my configurations to fit the ones written in the page below:
http://lists.usefulinc.com/pipermail...ly/000940.html

Now it works! I could send sms on console, get my phonebook via xgnokii but couldn't get my sms stored in my phone. xgnokii broke down (with no response for a long time) when I pressed sms button, and in the console, gnokii --getsms SM 1 responsed a time out. In the debug logs, I see "PHONET: Message buffer overun - resetting" line.