I was not sure about where to post this thread, since its related to hardware..
If anyone feel like moving it, please do so.
I've also searched for related problems, but i could't seem to find any.
Additional Information in case it might be relative:
It is a fresh install of
ubuntu with post-installed KDE and a dist-upgrade.
Quote:
uname -a == Linux nutz 2.6.10-1-386 #1 Fri Mar 11 02:31:59 EST 2005 i686 GNU/Linux
cat /proc/version == Linux version 2.6.10-1-386 (dilinger@mouth) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Fri Mar 11 02:31:59 EST 2005
glib-config --version == 1.2.10
mount --version == mount: mount-2.12p
|
Ok, straight to the case:
I wanted to upgrade my kernel from 2.6.8 -> 2.6.10-1-386, because my nvidia drivers wouldn't install on the 2.6.8 kernel. (I used apt)
So after i upgraded the kernel, the nvidia drivers installs perfect, but then another problem occured:
I've added the line below into /etc/fstab:
/dev/hdb1 /disk/1 ext3 defaults 0 0
But when i try to do "
mount -a", i get this error:
root@nutz:~ #
mount -a
mount: /dev/hdb1 already mounted or /disk/1 busy
I also get this error when I try to do the
mount completely manually:
mount -t ext3 /dev/hdb1 /disk/1
As you probably can see below, this is not true:
Quote:
root@nutz:~ # cat /proc/mounts
rootfs / rootfs rw 0 0
/dev2/root2 / ext3 rw 0 0
proc /proc proc rw,nodiratime 0 0
sysfs /sys sysfs rw 0 0
/dev2/root2 /dev/.static/dev ext3 rw 0 0
tmpfs /dev tmpfs rw 0 0
devpts /dev/pts devpts rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
usbfs /proc/bus/usb usbfs rw 0 0
|
"lsof |grep /dev/hdb1" gives a new line. (Meaning that it could't find anything)
Quote:
root@nutz:~ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 113G 85G 22G 80% /
tmpfs 253M 4.0K 253M 1% /dev/shm
tmpfs 10M 2.8M 7.3M 28% /dev
root@nutz:~ #
|
Quote:
root@nutz:~ # ls -ald /disk/1/
drwxr-xr-x 2 root root 4096 Mar 24 11:36 /disk/1/
root@nutz:~ #
|
"lsof |grep /dev/disk/1" Also gives a new line..
Quote:
root@nutz:~ # umount /dev/hdb1
umount: /dev/hdb1: not mounted
root@nutz:~ #
|
Does anyone know what my problem can be related to? And most importantly, does anyone know how to fix this?
nohope@EFnet.