LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Red Hat
User Name
Password
Red Hat This forum is for the discussion of Red Hat Linux.

Notices

Reply
 
Search this Thread
Old 08-18-2008, 08:26 AM   #1
zeus-dice
LQ Newbie
 
Registered: Aug 2008
Posts: 3

Rep: Reputation: 0
file sharing from centos 5.2 with windows xp and vista


Good Day All

Can any one please help me.

I have installed centos 5.2 to my workgroup. I then create users in centos and made the usename and passwords same as the windows machines. I then added the users to samba.
Now the tricky part comes in. I create to shared folders 1. backup and 2. test. In the sambe configuration i selected each directory to share and selected every one. (nb:because i can not see the users to select access to, It seems that there is a bug in samba) .

On my windows machines i can see the centos machine. When i click on it it asks for a user name and password which i enter. I then can see the two files shared and a printer file. When ever i select on tho shared files i get a error
"windows cannot access \\gonowsa\backup check the spelling of the name. Otherwise, there might be a problem with your network, To try to identify and resolve network problems, click Diagnose" The only file that i can access is the printer one. I have tried every thing and just can come right

This is my smb.conf file

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:

#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
ny line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba-share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#======================= Global Settings =====================================

[global]

# ----------------------- Network Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#
; workgroup = workgroup
server string = gonow sa back up

; netbios name = MYSERVER

; interfaces = lo eth0 192.168.1.2/24 192.168.13.2/24
; hosts allow = 127. 192.168.1.0/24 192.168.1.24/48

# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach

# logs split per machine
; log file = /var/log/samba/%m.log
# max 50KB per log file, then rotate
; max log size = 50

# ----------------------- Standalone Server Options ------------------------
#
# Security can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.

; security = user
passdb backend = tdbsam


# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *


; security = domain
; passdb backend = tdbsam
; realm = MY_REALM

; password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations.
#
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#
; security = user
; passdb backend = tdbsam

; domain master = yes
; domain logons = yes

# the login script name depends on the machine name
; logon script = %m.bat
# the login script name depends on the unix user used
; logon script = %u.bat
; logon path = \\%L\Profiles\%u
# disables profiles support by specifing an empty path
; logon path =

; add user script = /usr/sbin/useradd "%u" -n -g users
; add group script = /usr/sbin/groupadd "%g"
; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
; delete user script = /usr/sbin/userdel "%u"
; delete user from group script = /usr/sbin/userdel "%u" "%g"
; delete group script = /usr/sbin/groupdel "%g"


# ----------------------- Browser Control Options ----------------------------
#
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; local master = no
; os level = 33
; preferred master = yes

#----------------------------- Name Resolution -------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#
# - WINS Support: Tells the NMBD component of Samba to enable it's WINS Server
#
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
#
# - WINS Proxy: Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
#
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.

; wins support = yes
; wins server = w.x.y.z
; wins proxy = yes

; dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
#
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
#
# Printcap Name let you specify an alternative printcap file
#
# You can choose a non default printing system using the Printing option

; load printers = yes
cups options = raw
; workgroup = workgroup
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = WORKGROUP
; security = user
; workgroup = WORKGROUP
; workgroup = workgroup
security = share
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = workgroup
; security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = workgroup
; security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = workgroup
; security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = workgroup
; security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody

; printcap name = /etc/printcap
#obtain list of printers automatically on SystemV
; printcap name = lpstat
; printing = cups

# --------------------------- Filesystem Options ---------------------------
#
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
#
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares

; map archive = no
; map hidden = no
; map read only = no
; map system = no
; store dos attributes = yes


#============================ Share Definitions ==============================

[homes]
comment = Home Directories
browseable = no
writeable = yes
; valid users = %S
; valid users = MYDOMAIN\%S

[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
; guest ok = no
; writeable = no
printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
; [Profiles]
; path = /var/lib/samba/profiles
; browseable = no
; guest ok = yes


# A publicly accessible directory, but read only, except for people in
# the "staff" group
; [public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = +staff

[test]
path = /home/michelle/Desktop/test
writeable = yes
; browseable = yes
guest ok = yes
comment = test
; browseable = yes
; browseable = yes


[back up]
path = /home/gonowsa/Desktop
writeable = yes
; browseable = yes
guest ok = no
browseable = yes


as you can see the last two foldes are test and backup, should i add something here to maybe make it accesseble? Please advise

Regards
 
Old 08-19-2008, 02:44 AM   #2
stuart_cherrington
Member
 
Registered: Aug 2008
Location: Get back in your Cube Unix Boy!
Distribution: rh5, oel5, debian etch, solaris
Posts: 228

Rep: Reputation: 36
In your smb.conf you've got a string of

server string = gonow sa back up

Is this a typo as your previous comment suggetss the server would be called \\gonowsa ???

Stuart
 
Old 08-20-2008, 01:33 AM   #3
zeus-dice
LQ Newbie
 
Registered: Aug 2008
Posts: 3

Original Poster
Rep: Reputation: 0
Hi There Sir

Yes it is called gonowsa and i have chaged it. But still have the same problem. When i select my network places in windows i see gonowsa when i doulbe click it ask for a password which i enter then i see all the shared folders. But when i select on any folder i get a error. the only folder that i can go into is printers.

And from the linux machine i can see all the windows machines and access all there shared files

Please advise and thank you in advance. this is my smb.conf file now. Do you not think that the permissions are not set right for the folders as in samba i can not select which user's to access the file as there are no users to select ( I think a bug in samba) is there maybe a way around it. Please advice i am so lost.



# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samb...Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba-share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#======================= Global Settings =====================================

[global]

# ----------------------- Network Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#
; workgroup = workgroup
server string = gonowsa

; netbios name = MYSERVER

; interfaces = lo eth0 192.168.1.2/24 192.168.13.2/24
; hosts allow = 127. 192.168.1.0/24 192.168.1.24/48

# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach

# logs split per machine
; log file = /var/log/samba/%m.log
# max 50KB per log file, then rotate
; max log size = 50

# ----------------------- Standalone Server Options ------------------------
#
# Security can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.

; security = user
passdb backend = tdbsam


# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *


; security = domain
; passdb backend = tdbsam
; realm = MY_REALM

; password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations.
#
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#
; security = user
; passdb backend = tdbsam

; domain master = yes
; domain logons = yes

# the login script name depends on the machine name
; logon script = %m.bat
# the login script name depends on the unix user used
; logon script = %u.bat
; logon path = \\%L\Profiles\%u
# disables profiles support by specifing an empty path
; logon path =

; add user script = /usr/sbin/useradd "%u" -n -g users
; add group script = /usr/sbin/groupadd "%g"
; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
; delete user script = /usr/sbin/userdel "%u"
; delete user from group script = /usr/sbin/userdel "%u" "%g"
; delete group script = /usr/sbin/groupdel "%g"


# ----------------------- Browser Control Options ----------------------------
#
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; local master = no
; os level = 33
; preferred master = yes

#----------------------------- Name Resolution -------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#
# - WINS Support: Tells the NMBD component of Samba to enable it's WINS Server
#
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
#
# - WINS Proxy: Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
#
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.

; wins support = yes
; wins server = w.x.y.z
; wins proxy = yes

; dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
#
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
#
# Printcap Name let you specify an alternative printcap file
#
# You can choose a non default printing system using the Printing option

; load printers = yes
cups options = raw
; workgroup = workgroup
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = WORKGROUP
; security = user
; workgroup = WORKGROUP
; workgroup = workgroup
; security = user
; workgroup = workgroup
; workgroup = WORKGROUP
; security = user
; workgroup = WORKGROUP
username map = /etc/samba/smbusers
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = workgroup
; security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = workgroup
; security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = workgroup
; security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; workgroup = workgroup
; security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody
; encrypt passwords = yes
; guest ok = no
; guest account = nobody

; printcap name = /etc/printcap
#obtain list of printers automatically on SystemV
; printcap name = lpstat
; printing = cups

# --------------------------- Filesystem Options ---------------------------
#
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
#
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares

; map archive = no
; map hidden = no
; map read only = no
; map system = no
; store dos attributes = yes


#============================ Share Definitions ==============================

[homes]
comment = Home Directories
browseable = no
writeable = yes
; valid users = %S
; valid users = MYDOMAIN\%S

[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
; guest ok = no
; writeable = no
printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
; [Profiles]
; path = /var/lib/samba/profiles
; browseable = no
; guest ok = yes


# A publicly accessible directory, but read only, except for people in
# the "staff" group
; [public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = +staff

[test]
path = /home/michelle/Desktop/test
comment = test share
; guest ok = no
; writeable = no
; printable = no
create mask = 0765
writeable = yes
; browseable = yes
guest ok = yes

[back up]
path = /home/gonowsa/Desktop
valid users = gonowsa
; guest ok = no
; writeable = no
; printable = no
create mask = 0765


[gonowsa]
comment = home dir
path = /home/gonowsa
guest ok = yes
writeable = yes
; printable = no
create mask = 0765
; browseable = yes
; browseable = yes
 
Old 08-20-2008, 02:42 AM   #4
stuart_cherrington
Member
 
Registered: Aug 2008
Location: Get back in your Cube Unix Boy!
Distribution: rh5, oel5, debian etch, solaris
Posts: 228

Rep: Reputation: 36
OK - I'm no SAMBA expert, but the user credentials now look to be stored in something called tdbsam, in my day we used smbpasswd. Are the users trying to access the share listed in tdbsam? PS>Don't ask me how to check, I've not seen tdbsam.

Stu.
 
Old 08-20-2008, 02:43 AM   #5
billymayday
Guru
 
Registered: Mar 2006
Location: Sydney, Australia
Distribution: Fedora, CentOS, OpenSuse, Slack, Gentoo, Debian, Arch, PCBSD
Posts: 6,678

Rep: Reputation: 122Reputation: 122
FOrgive me for not reading all that.

Does it work if you disable SELinux (setenforce 0)? Try it then switch SELinux back on (setenforce 1).

Also, check out your samba log files, probably in /var/log/Samba
 
Old 08-21-2008, 02:58 AM   #6
zeus-dice
LQ Newbie
 
Registered: Aug 2008
Posts: 3

Original Poster
Rep: Reputation: 0
Good Day

I have Temporarily switch off enforcement to o and would you belive it if i tell you it worked. I double clicked on the gonowsa network icon on my windows. I got prompt for a user name and password. I entered it in and i saw all the folders as before. But now when i clicked on the file i got in

Should I leave it as disabled will this cause any problem?

Once again thank you so much for the help, As for the tdbsam I am not sure how to check this.


Thanks again
 
Old 08-21-2008, 03:11 AM   #7
billymayday
Guru
 
Registered: Mar 2006
Location: Sydney, Australia
Distribution: Fedora, CentOS, OpenSuse, Slack, Gentoo, Debian, Arch, PCBSD
Posts: 6,678

Rep: Reputation: 122Reputation: 122
I'd suggest you read the SELinux notes in the config file (you posted it above).

If you can't get it to work properly given the advice therein, you can use:

setsebool -P smbd_disable_trans on
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
printer setup from Centos 5 to Vista home prem. on a headless centos pc ncsuapex Red Hat 6 03-10-2008 11:40 AM
Sharing with windows Vista nardz Linux - Newbie 4 04-23-2007 09:06 AM
file sharing with windows hernan Linux - Newbie 3 01-04-2005 08:47 PM
File sharing with Windows? cucolin@ Red Hat 8 04-03-2004 03:19 PM
re: windows and linux file sharing rahul_jain_9684 Linux - Software 4 07-28-2003 02:42 AM


All times are GMT -5. The time now is 05:52 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration