Hi All,
Trying to share usb video cam.
Just for grins, I set the baseline by testing the cam with Cheese (works fine).
See also:
Code:
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
Bus 001 Device 005: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
Bus 002 Device 002: ID 15d9:0a4d Trust International B.V.
Bus 002 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Installed usbip
Code:
apt-get install usbip
Setting up the host to share the usb cam, I run:
Code:
sudo usbip_bind_driver --list
[sudo] password for xxxx:
List USB devices
- busid 1-3 (0846:4260)
1-3:1.0 -> rtl8187
- busid 1-4 (046d:0990)
1-4:1.0 -> uvcvideo
1-4:1.1 -> uvcvideo
1-4:1.2 -> snd-usb-audio
1-4:1.3 -> snd-usb-audio
- busid 2-1 (15d9:0a4d)
2-1:1.0 -> usbhid
- busid 2-2 (413c:2105)
2-2:1.0 -> usbhid
To share the usb video, I issue:
Code:
sudo usbip_bind_driver --usbip 1-4
** (process:2174): WARNING **: add 1-4 to match_busid, failed
Now when I list the available USB devices again I get this:
Code:
sudo usbip_bind_driver --list
List USB devices
- busid 1-3 (0846:4260)
1-3:1.0 -> rtl8187
- busid 1-4 (046d:0990)
1-4:1.0 -> none
1-4:1.1 -> none
1-4:1.2 -> none
1-4:1.3 -> none
- busid 2-1 (15d9:0a4d)
2-1:1.0 -> usbhid
- busid 2-2 (413c:2105)
2-2:1.0 -> usbhid
No device shared; usbip not listening on 3240, and Cheese no longer sees the usb video cam.
Restart resets the baseline.
Any help would be appreciated in getting this usb cam setup with usbip.
Thanks
